Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 2527 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I've been Playing Golf for: 5 Years

My current handicap index or average score is: Low-Mid 70s

My typical ball flight is: High Draw

The shot I hate or the "miss" I'm trying to reduce/eliminate is: Pull Hook, Push


7 Iron

54* Sand Wedge

I finally got out to the range.  My front foot doesn't usually spin out that much, it was a little damp.  Both of these shots were high push draws.  I'm excited for any and all responses, good or bad.  Let me know what yall think!

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


Posted

Sorry about the quality of the video.  I was kind of in a hurry hence why it is not exactly down the line.

I have been working on shortening my back swing and swinging a little flatter.  Any suggestions to make this transition go faster and more smoothly would be appreciated. Also, please point out any flaws you may see.

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


  • 4 months later...
Posted

6 Iron

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


Posted

I am recently having issues with inconsistent contact.   I am working on shortening my backswing but this is still a work in progress.  Could someone please help me out?

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


Posted

It's hard to tell from the videos. Do you pick the ball? And by that I mean, do you often strike the ball without taking a divot?


Posted

Yeah the video is from an Iphone and I don't know how to upload the slow mo video that I have.  In slow mo I noticed that I am casting the club which I think is a result of my swing backswing way too long.  When I was striking the ball well I always took a divot.  Now I am hitting the ball thin, fat and yes I am picking the ball as well.  Just super inconsistent.

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


  • 3 years later...
Posted

 

First time to the range in a long time.  I haven't played a round in a bout 2 months.  It was nice just to get out there and go.  Anyways, was mostly hitting push draw/hook but I did hit a few pull draws/hooks.  Any and all advice welcome.  

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


  • Moderator
Posted
19 hours ago, jaredshows1 said:

 

First time to the range in a long time.  I haven't played a round in a bout 2 months.  It was nice just to get out there and go.  Anyways, was mostly hitting push draw/hook but I did hit a few pull draws/hooks.  Any and all advice welcome.  

This angle makes it difficult to get good analysis. I would recommend getting an inexpensive tripod and keep it in your car so you can get better video angles.

FWIW, you appear to be swinging out of your shoes in these swings. One drill that I do, and video, is do three swings, one at 50%, one at 70% and the last my normal full speed. Then look at the differences. For me, my full swing looked different because I was changing my sequence. I had to work on that for a while.

Scott

Titleist, Edel, Scotty Cameron Putter, Snell - AimPoint - Evolvr - MirrorVision

My Swing Thread

boogielicious - Adjective describing the perfect surf wave

Awards, Achievements, and Accolades

Posted

 

4 hours ago, boogielicious said:

This angle makes it difficult to get good analysis. I would recommend getting an inexpensive tripod and keep it in your car so you can get better video angles.

FWIW, you appear to be swinging out of your shoes in these swings. One drill that I do, and video, is do three swings, one at 50%, one at 70% and the last my normal full speed. Then look at the differences. For me, my full swing looked different because I was changing my sequence. I had to work on that for a while.

Thanks for the feedback.  Yeah my camera angle sucks, a tripod is on the way.  

I have always struggled with staying balanced through out my swing but these are typical swings for me.  I don't know if my lead foot is spinning out too much, if its a swaying issue or over swinging a bit.  The longer the club, the less balanced I seem to be.  Thanks for the drill I will definitely try it!  

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


  • 1 year later...
Posted

 

Hitting the TS2.  It's been a few years since I've been on simulator/monitor.  One big thing I noticed is my clubhead speed was down about 4 mph from 111 to 107 from a few years ago.

I'm not sure the specific reason for that but I'm down to playing about once a month vs. once to twice a week, plus I've put on some weight in the last few years lol

Anyways, I know the angle is not great, but all insight is welcome! 

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


  • 6 months later...
Posted

 6 Iron

 

 

Driver:     Cleveland Launcher DST 9.0 Degree, UST Proforce V2 67 X-Stiff
Wood:     Cleveland Launcher (2009) 15 Degrees, Stock shaft Stiff
Hybrid:    Adams Idea A2 20 Degree, stock shaft stiff
Irons:       Cleveland CG Red , 3-PW, DSG300 Stiff
Wedges:  Titleist Vokey SM4 54 and 60 degrees
Putter:     Odyssey White Hot Tour #5 34.5 inches
Balls:      Titleist Pro V1X, Srixon Z-Star XV


Note: This thread is 2527 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.