Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 7367 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I am just curios as to which you lot prefer. Personally, I like long, wooden tees. I can hit plastic ones, but only with about 7 iron-PW, not any other clubs. I play much better with the long white wooden ones, and I have plentiful supply of them.

Which do you prefer?

In my bag: (all graphite (regular flex)except putter)

Howson:
"Tour XP" 370cc Driver
Comp Plus 18* Utility woodTexan Classics:3 & 5 woods4i-PWSWMy dad's putter (dont know the brand)Home Course: Peterhead GC Nine-Hole Course


Posted

I use the shorter wooden tees. I don't normally tee the ball up very high, so there is no need for longer tees in my situation.

I work for State Farm Insurance, and we just got in a whole load of State Farm tees, so I have a very large supply going right now. And I get to show off the State Farm as well.

By the way, I like to have a plastic tee or two to hit at the driving range, but I never hit them good on the course. I think it was a mental thing.

Awards, Achievements, and Accolades

Posted
I never thought of it from a performance standpoint. I can hit just as bad with either! I have noticed that plastic tees leave a nasty mark on the bottom of the driver though.
In my Arsenal.
Driver: R580 9.5°
Irons: Nike CPR Steel 5-PW
Woods:
Nike T40 3 Fairway Nike T40 5 Fairway Hybrids: Nike CPR 22° Nike CPR 26° UST Irod ShaftSW: Nike 55°Forged Chrome SeriesPutter: Nike Blue Chip putterBalls: Nike One or Callaway Warbirds
******************

Posted
  Wizardvette said:
I never thought of it from a performance standpoint. I can hit just as bad with either! I have noticed that plastic tees leave a nasty mark on the bottom of the driver though.

I agree with this point about those plastic tees. They can leave some might nasty marks on the bottom on your club. In fact I didn't think anyone used plastic ones anymore. And in the heat of the summer it seemed they were sometimes tough to stick in the ground without them either bending or breaking.

  • Administrator
Posted

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
  iacas said:
I like

I guess you never tried to play golf after a few beers or in a heavy wind

It's a real pain in the you-know-what to get that damn ball stay on it ! On top of that - it's not economical, the thin S-tee never survives a swing, it's a one-swing tee only. I know you can use the broken one for an iron, but still - I went through a box of them in a month. $30. I think I'd give up these 20yds they promise (yeah, right) and go with normal tees
Awards, Achievements, and Accolades

Posted
normal white wooden tees for driver. as said above i don't need to tee it up that high as i have a relatively shallow faced driver. i just bought a pack of the tees tiger uses... like the stinger tees... pretty nice, seemed to have held up well after a couple of drives, and they are relatively soft too.

for irons i use the lowest 'height-set' tees. their virtually indestructible... made of a soft plastic so no marks... and always are set at the perfect height. if i want to tee the ball slightly higher i use a wooden tee.

Note: This thread is 7367 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Starting over - missed posting yesterday and it had been less than 28 days since last off day….today was tempo drill day.  Worked on takeaway and moving smoothly into weight shift.  
    • I know it is probably dependent on a lot of factors, but how windy does it have to be out before you need to start guessing on how much it would influence the break of your putt?  When I played at Bandon, it was like 25-30 mph winds. The caddies talked about the wind negating break. The only time I had it visually influence my putt was on hole 18 at Bandon Dunes. My missed my putt on the high side of a pretty severe breaking putt. The slope around the hole was in the 2-3 degree range. As the ball was about to come to a stop, the wind gusted and pushed the ball half a rotation into the cup.  The rest of the week I thought it had no influence at all. I was thinking, is it just over thinking to try to account for the wind?   
    • Day 310 - 2025-08-06 Went downtown in the late afternoon and got nearly two hours of work in. Not a ton of breaks. Was blasting the TS at the end, from a HomePod and two TVs. 😄 
    • I watched this video of his last night: I don't hate him like @boogielicious apparently does and thought this was a pretty good premise so I gave it a shot.  Not the worst thing in the world and I especially liked the premise.  He's got a lot of air to fill by himself, which he isn't great at, but in doing so, you get some decent insight into how his brain works while setting up shots/putts.
    • So driver is longer than all the other clubs and gear effect plays a bigger part with driver than anything else. If you're hitting it out of the heel it could slice even if you have the face square. Could try some foot spray or impact tape and check that. Other thing is if the shaft is different in how it flexes or how flexible it is it could be affecting your swing somewhat. Driver also has the straightest face, so while with a 4 iron it might fade, with driver that can wind up being a slice with the same face angle at impact. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...