Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3990 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Quote:

Originally Posted by Lihu

Quote:

Originally Posted by Oz Max

Also is your wedges swing speed really relevant? I can understand driver SS... but on wedges? I hardly ever hit those with distance in mind, more to do with sticking it as close as possible to the pin. The ball doesn't care whether it got hit with a 145mph SW or a 85mph PW, as long as it's where you want it to land! that's just the way I see golf.

If you can swing a higher lofted club faster, then your chances of sticking a green are a lot higher. The landing trajectory is a lot steeper and the spin numbers are a lot higher.

Yeah but the pros aren't swinging their wedges 100mph and they can stop the ball on just about anything. Too much spin can also hurt accuracy

There is a definitive advantage to being able to do what the OP stated. If someone could swing that fast, they could use half or quarter swings. It would be more controlled.

Just imagine your pitches going 100 yards or more with the same controlled swing you or I use for pitching 40-80 yards?

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted
Quote:

Originally Posted by SavvySwede

Quote:

Originally Posted by Lihu

Quote:

Originally Posted by Oz Max

Also is your wedges swing speed really relevant? I can understand driver SS... but on wedges? I hardly ever hit those with distance in mind, more to do with sticking it as close as possible to the pin. The ball doesn't care whether it got hit with a 145mph SW or a 85mph PW, as long as it's where you want it to land! that's just the way I see golf.

If you can swing a higher lofted club faster, then your chances of sticking a green are a lot higher. The landing trajectory is a lot steeper and the spin numbers are a lot higher.

Yeah but the pros aren't swinging their wedges 100mph and they can stop the ball on just about anything. Too much spin can also hurt accuracy

There is a definitive advantage to being able to do what the OP stated. If someone could swing that fast, they could use half or quarter swings. It would be more controlled.

Just imagine your pitches going 100 yards or more with the same controlled swing you or I use for pitching 40-80 yards?

Maybe. But I think with that kind of speed it would be tougher to control the ss of a half swing and therefore the yardage. You could be trying to throttle down to 85mph but easily end up with 92mph because of the level of acceleration.

:callaway: Big Bertha Alpha 815 DBD  :bridgestone: TD-03 Putter   
:tmade: 300 Tour 3W                 :true_linkswear: Motion Shoes
:titleist: 585H Hybrid                       
:tmade: TP MC irons                 
:ping: Glide 54             
:ping: Glide 58
:cleveland: 588 RTX 62

Awards, Achievements, and Accolades

Posted
Quote:

Originally Posted by Lihu

Quote:

Originally Posted by SavvySwede

Quote:

Originally Posted by Lihu

Quote:

Originally Posted by Oz Max

Also is your wedges swing speed really relevant? I can understand driver SS... but on wedges? I hardly ever hit those with distance in mind, more to do with sticking it as close as possible to the pin. The ball doesn't care whether it got hit with a 145mph SW or a 85mph PW, as long as it's where you want it to land! that's just the way I see golf.

If you can swing a higher lofted club faster, then your chances of sticking a green are a lot higher. The landing trajectory is a lot steeper and the spin numbers are a lot higher.

Yeah but the pros aren't swinging their wedges 100mph and they can stop the ball on just about anything. Too much spin can also hurt accuracy

There is a definitive advantage to being able to do what the OP stated. If someone could swing that fast, they could use half or quarter swings. It would be more controlled.

Just imagine your pitches going 100 yards or more with the same controlled swing you or I use for pitching 40-80 yards?

Maybe. But I think with that kind of speed it would be tougher to control the ss of a half swing and therefore the yardage. You could be trying to throttle down to 85mph but easily end up with 92mph because of the level of acceleration.

The only point I was making is that with that kind of swing speed you can hit your "controlled feel" swings a lot farther (twice) than the average golfer using the same relative effort. IDK if I agree that it could be 7mph difference, especially if you have the mechanics to swing this fast in the first place?

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Posted

Oh you are absolutely right, a higher SS is always helpful, however the wedges game, is more about precision than pure distance. I don't tend to hammer those shots, thinking "rip it!!!!", like I'd do with my driver where I really want to crush that ball as far I can.

I agree though that being able to hit a higher lofted club is undeniably advantageous.


Posted

I'm playing mp-14 irons. They are old traditional lofts. Probably 2 degrees weaker than any newer clubs.

Possibly 4 degrees.

http://www.golfclubspec.com/iron_results.php?id=145

:ping:  :tmade:  :callaway:   :gamegolf:  :titleist:

TM White Smoke Big Fontana; Pro-V1
TM Rac 60 TT WS, MD2 56
Ping i20 irons U-4, CFS300
Callaway XR16 9 degree Fujikura Speeder 565 S
Callaway XR16 3W 15 degree Fujikura Speeder 565 S, X2Hot Pro 20 degrees S

"I'm hitting the woods just great, but I'm having a terrible time getting out of them." ~Harry Toscano

Awards, Achievements, and Accolades

Note: This thread is 3990 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Popular Now

  • Posts

    • Day 11, 1/11/26.  Today was putting, along about 6' of carpet, with coins on the ground to keep me cognizant of what I'm doing.  I think this is the at-home drill from LSW. (Ugh, missed two of the last four days -- 1/10 and 1/8)
    • Day 9: 2026.01.11 Hit some balls at the range, concentrating on weight distribution at address, got some on film.
    • Day 468 - 2026-01-11 Loooooong day. Did some work in the patio door (as a mirror) when I got home.
    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
    • Wordle 1,667 3/6 🟨🟨⬜⬜⬜ ⬜⬜⬜🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.