Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6654 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Now, i know that this is a big problem in most 'beginners' games however mine varies. I only get slice off my Driver for starters.

Now, when teeing off, it has got to the point where i allow for my slice to pull the ball back onto the fairway as i simply dont know what else to do. If i slow down my swing, it lessens but i lose about 20 or 30 yards in the process.

I was just wondering whether there were anymore tips out there which i could try since i have tried practically everything in the book.

Cheers.

"You'll Never Walk Alone"

Home Course: Gawler Golf Club
Glove: Nike Tech Feel
Balls: Nike Power Flight


Posted
What have you tried?

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted

A lot

I have mainly tried David Leadbetter's drills to try and counter it along with a few old books which have been passed down to me.
You name something and i'll be sure to let you know whether it worked/works

"You'll Never Walk Alone"

Home Course: Gawler Golf Club
Glove: Nike Tech Feel
Balls: Nike Power Flight


Posted
PM your email address. I will send you an article called "Never Slice Again" by Brian Manzella. If you do what he says, you will never slice again!

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted
Whenever someone is having an issue with one club but not all the others it's usually because the shaft is a completely different flex.

Equipment, Setup, Finish, Balance, and Relax. All equal in importance and all dependent on each other. They are the cornerstones of a good golf swing.


Posted
Whenever someone is having an issue with one club but not all the others it's usually because the shaft is a completely different flex.

I used to have the same problem, slice my driver, hit irons straight, bought a stiff flex shaft for my driver... problem solved. Id suggest going and seeing a club pro and getting your swing speed measured and find out if your shaft is right for you.

In My Bag:
Driver: R7 Limited Matrix Ozik X-con Stiff
3 Wood: 909F3 Aldila Voodoo Stiff
Irons: AP1 3-PW DG S200
Wedge: Vokey Spin Milled 54° NickelWedge: Forged 60°Putter: Rossa Balls: Pro V1XAvatar: Nicklaus North Golf Course, Whistler BC

Posted
Yeah that was my next step actually. Not necessarily changing my shaft but even getting a decent, Taylor-Made set of clubs. The clubs i have now were really just to see whether i liked the game and to see how long the hobby would last...

"You'll Never Walk Alone"

Home Course: Gawler Golf Club
Glove: Nike Tech Feel
Balls: Nike Power Flight


Posted
Since there is more than one reason why you might be slicing the ball I think it would be a good idea to figure out if you are swinging outside-in or if it is a problem with your release (or is there something else?).

I started golf this spring and for the first few months was slicing the ball with my driver like there was no tomorrow. I gradually got rid of the slice and it hasn't been a problem for me in the last couple of months. For me the key was to concentrate on rotating my body and working on my release. I really have to actively concentrate on rotation (trying to get the left shoulder behind the ball) during the backswing when I'm driving. One thing that helped me in this department is lifting my chin a bit to have more room for the shoulder turn.

As far as release goes I think that is something that takes some time to work out. I don't tend to get good results if I try to actively concentrate on release when I swing but it does help if I concentrate on it during my practice swings.

Just my 2c, hope you are able to work it out. For an ex-slicer straight drives are one of the most rewarding things in golf :)

Posted

I have the same problem. Slice my driver (reg shaft) and hit my irons straight (stiff shaft). I think that this problem might have been answered already in this thread though

Whats in the bag:

Driver: Nike Ignite 460cc 10.5* Fujikura Ignite reg flex
Fairway woods: Howson tour master power series 3,5 woods
Irons: MacGregor M675 3-PW DG S300 Wedges: Mizuno MP-R Black Nickel 54.10, 60.05Putter: Pinfire Golf P4Ball: Titleist NXT TourHome Course:http://www.golfarmagh.co.uk/...

Posted
I was thinking of getting either the Nike Sasquatch Sumo or Ignite as you have there..How does that perform for you?

"You'll Never Walk Alone"

Home Course: Gawler Golf Club
Glove: Nike Tech Feel
Balls: Nike Power Flight


Posted
I have the same problem......on my Iron shots its and easy fix, slow down the swing, and club up about 1-2 clubs depending on the shot. Off the tee I started using a strong right hand grip. It's reducing my slice occurrence and severity, but not curing it completely....Something to think about.
Rynofskie

In My Well-Used Highlander Bag:

Driver:Redline RPM 9.5* Driver - TourLaunch Blue Shaft Rescue: "The Ripper" wal-mart special 3HybridIrons: ADAMS GT500 Undercut Widesole 4-LWPutter: Ray Cook custom mallet putterGuns don't kill people - the proper application of sight alignment, target...

Posted
I was thinking of getting either the Nike Sasquatch Sumo or Ignite as you have there..How does that perform for you?

I had the EXACT problem too - driver=slice, irons=straight...since I got the SasQuatch (non-square version) my drives rarely slice...they 'power-fade' :) Just be sure to get the right shaft for your swing speed, etc...u know the fitting drill

:P
In the bag Nike SasQuatch SuMo 10.5* {} Tiger Shark Hammerhead 3w, 5w, 3h {} Nickent 3DX Pro 5i-PW {} Titleist Vokey 250.08* {} Cleveland CG11. 54* {} Callaway X-Tour 58.11* {} Carbite Tour Classic Putter {} Titleist ProV1x


Posted
Fair enough. Thank you for the input. It will give me something to consider.

As for Rynofskie...That works me we as well. At times i slow down my swing throughout my bag just to get the technique completely right and then begin to work my way up. It usually works on my driver with about 70% power i can hit a reasonably straight ball. It is really just trial and error i believe...

Perhaps if i take a few different flex's of the SasQuatch driver down to the range and hit a few balls that could lead me to a decision. It cant hurt, im dieing for a new driver anyway.

"You'll Never Walk Alone"

Home Course: Gawler Golf Club
Glove: Nike Tech Feel
Balls: Nike Power Flight


Posted
I had the EXACT problem too - driver=slice, irons=straight...since I got the SasQuatch (non-square version) my drives rarely slice...they 'power-fade' :) Just be sure to get the right shaft for your swing speed, etc...u know the fitting drill

What shaft did you get on your Sasquatch?


DRIVER - Tight Lies/Graphite/10°
3 WOOD - Sasquatch/Graphite/15°
5 WOOD - Tight Lies/Graphite/19°
IRONS - X-22/Steel/3-PWAW - SV Tour Black Satin/Steel/52°SW - SV Tour Black Satin/Steel/56°LW - SV Tour Black Satin/Steel/60°PUTTER - Black Series #2/34"

Posted
What shaft did you get on your Sasquatch?

Since my swing speed is only 90 mph, they guy at golfsmith suggested a regular flex shaft which is what i had on my previous driver. Basically just got the stock shaft (Diamana)

:P
In the bag Nike SasQuatch SuMo 10.5* {} Tiger Shark Hammerhead 3w, 5w, 3h {} Nickent 3DX Pro 5i-PW {} Titleist Vokey 250.08* {} Cleveland CG11. 54* {} Callaway X-Tour 58.11* {} Carbite Tour Classic Putter {} Titleist ProV1x


Posted
Since my swing speed is only 90 mph, they guy at golfsmith suggested a regular flex shaft which is what i had on my previous driver. Basically just got the stock shaft (Diamana)

I'm surprised that a stiff shaft wasn't recommended. I assume for swing speeds below 90MPH, a stiffer shaft would be better.


DRIVER - Tight Lies/Graphite/10°
3 WOOD - Sasquatch/Graphite/15°
5 WOOD - Tight Lies/Graphite/19°
IRONS - X-22/Steel/3-PWAW - SV Tour Black Satin/Steel/52°SW - SV Tour Black Satin/Steel/56°LW - SV Tour Black Satin/Steel/60°PUTTER - Black Series #2/34"

Posted
I'm surprised that a stiff shaft wasn't recommended. I assume for swing speeds below 90MPH, a stiffer shaft would be better.

exact opposite. If you don't swing fast enough to flex the shaft properly then you'll feel like your swinging a 2x4 and the shaft won't release into the impact zone. You might was well be swinging a long wooden spoon with a titanium spatula attached to the end. :)

Swing = Stacked and On Plane when possible.
In My Bag:
Driver: Ping G5 9° Alidila NV 75g Stiff
3-Wood: Nike SQ 15° Diamana Stiff (Stock)
Irons: NIKE FORGED SPLIT CAVIY (S300)Wedges: Taylormade RAC Fe2O3 (Rust) 52°/56°/60°Putter: Titleist/Cameron Newport 1.5Ball: Looking for a new...


Posted
exact opposite. If you don't swing fast enough to flex the shaft properly then you'll feel like your swinging a 2x4 and the shaft won't release into the impact zone. You might was well be swinging a long wooden spoon with a titanium spatula attached to the end. :)

Hahaha. That was an interesting picture in my head. So, for slower swing speeds, a "flexier" shaft would be recommended.


DRIVER - Tight Lies/Graphite/10°
3 WOOD - Sasquatch/Graphite/15°
5 WOOD - Tight Lies/Graphite/19°
IRONS - X-22/Steel/3-PWAW - SV Tour Black Satin/Steel/52°SW - SV Tour Black Satin/Steel/56°LW - SV Tour Black Satin/Steel/60°PUTTER - Black Series #2/34"

Note: This thread is 6654 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.