Jump to content
IGNORED

50 and 52 degree Vokey Spin Milled coming!!!!


Note: This thread is 6068 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. Vokey Spin Milled 50 and 52 degrees

    • Yes
      25
    • No
      9


Recommended Posts

Now that I have got your attention...

Would you use a Vokey Spin Milled if they were to produce a 50 degree and 52 degree SM Wedges? Please state why you chose one of the answers. Thanks.

Driver
909D2 9.5º w/ Grafalloy Prolaunch Platinum Stiff

Woods
909F2 13.5º w/ Aldila Voodoo Fairway Stiff 909F2 18.5º w/ Aldila Voodoo Fairway StiffIrons MP60 3-PW w/ True Temper Dynamic Gold Sensicore S300Wedges Vokey Design 200 Series Tour Chrome 52-08 w/ True Temper Dynamic Gold S200...
Link to comment
Share on other sites


No, I don't have the money to keep me in golf balls, those would tear pro v's to pieces :)

In My Bag:

Driver: Burner Driver 9.5 (UST Proforce V2 Stiff 76g)
3 Wood: Rescue TP 14.5* (Stock 75g Stiff)
2 Iron: G10 Hybrid (Ust Proforce V2 85g High Launch Stiff)Irons: X- Forged (Rifle 6.0 Shafts)Wedges: 248.06, 252.08, SM56.10, SM60.04Putter: 9 XG Ball: TP BlackBag: Ozone Stand...

Link to comment
Share on other sites


yes because the 54 and 58 deg wegdes I use are vokey spinmilled and they aree quite simply the best wedges ever made . the next best wedge i have ever used is my 50 deg which is a 200 series .
Link to comment
Share on other sites


yes, I absolutely love my 56 and 60 degree sm. They are about 3 years old and are starting to take a beating. Grooves are great because I clean my clubs a lot and regroove often but they are just taking a beating from the rocks and all of the other crap on my crap golf course.

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x

Link to comment
Share on other sites


No, because I already own the matching 50º GW for my set. I do own 56/10 and 60/4 Vokeys [non Spin Milled] and think they're great.

In my bag:

Driver Cleveland Classic 310 Tour 10.5°  Miyazaki Kusala 61 Black Reg
Fairway Wood Cleveland Launcher FL 3/15° Miyazaki C.Kua 43 Reg
Hybrids Cleveland Mashie 3/20.5° & 4/23° Miyazaki C.Kua 43 Reg

Irons Wilson Ci9 5-6-7-8-9-PW-GW FST ss105 Reg 

Wedges Vokey SM 56.14

Putter GEL Ruby 34"

Balls Callaway HX Bite, Wilson Staff FG Tour

Link to comment
Share on other sites


Read my Sig.. Since you're going to use a 50 or 52 wedge to go about 100 yards, its best to take the 54 10 bounce and make it a 52 or even 50, it will bring the bounce down to a 8 or 6, depending if you go to a 52 or 50.. I went with a 56 and made it a 53 degree, I have 7 bounce and love the hell out of it!!!!

If you want more bounce which is kinda of weird go with the 54-14 and just make it a 52 and you will have 12 bounce..

So instead of waiting for them to come out, which they probably won't just bring your club to a professional
Link to comment
Share on other sites


nope theyre not even forged

DRIVER: R7 425 REAX STIFF
WOOD: R5 3 FW
IRONS: MP-60 4-PW
HYBRID: RESCUE MID 3 STEEL
WEDGES: MP R 52 & 58 CHROMEPUTTER: BLADEcoming soon: new woods and putter

Link to comment
Share on other sites


  • 1 month later...
I voted no, just because I play a 54* and 60*. If I played a 52* like I used to I would have to say, definately.

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |

Link to comment
Share on other sites


I say no because I'm in love with my Mizuno wedges. Tell me if I'm wrong but the Vokey wedges are cast. I like the feel of forged. Spin milled means nothing to me. I don't find any enjoyment by sucking a ball back 20 feet. I do enjoy hitting the wedge the distance I want and having it stay there.

What's in my bag
Driver: Taylor Made R7 425 9.5 degrees UST Proforce 65 shaft
3 Wood: Taylor Made V Steel 15 degrees
Taylor Made Rescue Dual 22 degrees (UST IROD shaft)
Irons: Mizuno MP-67 (bent 1 degree upright)Gap Wedge: Mizuno R Series Black Nickle 52 Sand Wedge: Mizuno R Series Black Nickle...

Link to comment
Share on other sites


Nope - have the matching 50 deg. gap wedge for my set.

In my bag:

Driver Cleveland Classic 310 Tour 10.5°  Miyazaki Kusala 61 Black Reg
Fairway Wood Cleveland Launcher FL 3/15° Miyazaki C.Kua 43 Reg
Hybrids Cleveland Mashie 3/20.5° & 4/23° Miyazaki C.Kua 43 Reg

Irons Wilson Ci9 5-6-7-8-9-PW-GW FST ss105 Reg 

Wedges Vokey SM 56.14

Putter GEL Ruby 34"

Balls Callaway HX Bite, Wilson Staff FG Tour

Link to comment
Share on other sites


I absolutey would, the only thing that seperated the callaway x tour from the vokey because the vokey spin milleds were available in a 52* so I had to go with callaway. I think it would be a great move if titleist offered the spin milled in a 50 and 52*.

10* Callaway FT-i w/ fujikura speeder 586 reg
15* Sonartec NP-99 w/ aldila nv 65 stiff
19* Sonartec NP-99 w/ aldila nv 65 stiff
4-pw Mizuno MP-60 w/ TTDG R300
52* Callaway X tour w/ TTDG R30058* Callaway X tour w/ TTDG R300

Link to comment
Share on other sites


Note: This thread is 6068 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Day 170 - Got some good work in on the short game, as well as more work on my priority piece. 
    • I searched around but didn’t see any other threads on this so I’ll put it here. I work in the laser industry and one of the applications has been additive manufacturing. The main market for the past 10 years has been SpaceX and the space industry and some medical applications. The new one I saw this week is 3D printing irons. Cobra and the company that they are using is marketing these irons pretty aggressively.  In talking with the folks in the booth at the trade show, the claim is that they can gain strength but reduce the weight to put it exactly where they want. The print of the iron is very cool. Mostly everything behind the face is a thin metal lattice and then in the heal and toe is a block of tungsten for weight.  I am old enough to remember the arguments about forged versus cast irons. I wonder if folks here will pay a bit more to get 3D printed irons.  They have a booth here where you can hit them but I hate lines and the line to do it is always long. I go again tomorrow, and if the line isn’t too long I’ll give it a try and report back.    Here are some pictures (I had some trouble uploading, I’ll try later)      
    • Day 185: 6/25/24 Putting on a 3’, 1” ruler with 2 different putters., both Spiders but different models. 
    • Day 103. Technique work on grip and flow. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...