Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 6435 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Why is taylormade drivers and fairways woods so much more used on the tour than titleist and callaway and other top brands. WHY ARE THEY SO GOOD. I've never tried one so I'd like to get some information about them.

Are they long, straight, forgiving, workable???
Thanks in advance.
Driver Titleist 905R 9.5* (Stiff Prolaunch Blue 65g)
Hybrid: PT 585.H 17 * (Stiff titleist 75g shaft)
Irons: 695.cb 3-9 ( Dynamic Gold S300)
Wedges: 735.CM 47* PW, Vokey 200 series 50.08 Oil Can Vokey Spin Milled 54.10 Tour chrome, Vokey Spin Milled 58.08 Oil canPutter: Wilson Staff Kirk Kurrie #1[CO.....

Posted
  Jack_2251 said:
Why is taylormade drivers and fairways woods so much more used on the tour than titleist and callaway and other top brands. WHY ARE THEY SO GOOD. I've never tried one so I'd like to get some information about them.

Jack,

They are very good and TayorMade also pays $$$$ for each wood pros put in the bag.

Posted
Yes thanks for the reply guys, I realise they pay big $$$ to get pro's to use them, but they also must be good because a lot of people who aren't paid use them, so what is so good about them: are they:
-Long
-Straight
-Forgiving
-Workable
-High/Low?
Driver Titleist 905R 9.5* (Stiff Prolaunch Blue 65g)
Hybrid: PT 585.H 17 * (Stiff titleist 75g shaft)
Irons: 695.cb 3-9 ( Dynamic Gold S300)
Wedges: 735.CM 47* PW, Vokey 200 series 50.08 Oil Can Vokey Spin Milled 54.10 Tour chrome, Vokey Spin Milled 58.08 Oil canPutter: Wilson Staff Kirk Kurrie #1[CO.....

Posted
I don't agree that Taylormade woods are long at all, I have hit plenty of woods that go further than them. I think the reason that so many Taylormade woods are used is that because of their MWT they are very straight and also Taylormade pays players a lot of money to use their products.

In the bag:

driver Big Ben CS3 9.5º
3-wood 906F4 15.5º
hybrid rescue mid 19ºirons: MP-60 3-PWwedges vokey spin-milled 54º and 60ºputter tracy IIball Pro V1


Posted
I definitely think TM drivers are the longest drivers.
MWT also helps a bit.
People always think money has a lot to do with what the players use but if you ask any pro, they'll tell you that once you get to their level of playing and with how much money they make on tour, its not about money. The worst player with a PGA tour card is a millionaire. Seriously, would you use a taylormade driver to get paid $1 million a year and give up winning one of the majors because you have a sorry driver in your bag?
I dont think so. Especially if you're as passionate about the game as they are.

Posted
all my woods are Taylormade - i can hit Titleist and Callaway woods pretty decently and sometimes futher but overall, the Tayloymade clubs find the target more often - i would say they're the most forgiving woods i've tried. I try to get clubs that make the game as easy as possible (so i got semi-cavitys instead of muscle backs, 10.5 loft in a regular driver rather than 8.5 in a tour driver, etc...)

WEAPONS:
Taylormade R9 10.5 L Grafalloy Prolaunch Platinum stiff 65g
Taylormade R9 15 NU YS+6 stiff 65g
Taylormade R9 19 NU YS+6 stiff 65g
Taylormade Tour Preferred 4-PW KBS Tour X-Stiff Cleveland CG12 RTG+ DSG 51Cleveland CG12 RTG+ DSG 55Cleveland CG12 RTG+ DSG 59Yes! Tracy II putterTitleist...


Posted
To answer your question, they are remarkably long. Here's the deal - they make the regular line for us average joes and they make a tp line. The average joe line is meant to fly high and forgiving shots on off center ones, but not very workable. The tp line (dangerously expensive, $100 to $300 more, but it's what the pros play)is meant to fly low and be very workable, consequently, not forgiving. Taylor Made gives you the options, you just have to play around with them, no pun intended.
What's In My 2006 r7 Stand Bag...

r7 XR Japan 10.5
200 Series 3 Wood
Burner Rescue 3 rac HT 4-PW rac fe2o3 56*,60* Rossa Daytona 1 Sport hat w/ Adidas Apparel

Posted
  Napster003 said:
Its because of their "inverted cone technology" and their fujikura rombax shaft. Not to mention their marketing. If you really want to know the details, just go to

The 'inverted cone' technology is marketing babble....it is the same thing as what Callaway called 'VFT'. As for the fuji shafts....that is what you will find on Callaways.

I myself am a Callaway/TaylorMade fan...playing both brands..so I am impartial (however I am currently using a Taylor R7). As for the list of tour players endorsing a brand....remember folks...what they are playing is not the same club off the shelf. Beyond the stock material...they also have customizations (they have club making vans at each event that modify as required). For instance...you can't get the configurations that Tiger has. You can't get the same Odyssey #9 putter that Phil is using. etc. It is just an endorsement. For woods....I say you cannot beat either Taylor or Cally. Just a matter of personal preference and to the eye.

Posted
You can get taylormade drivers nearly anywhere & they're very affordable.

Driver: Sumo2 5900 10.5*
3+ Utility: 3DX Utility 13.5*
Hybrids: 4DX 18.5*
Irons: MP-30 3-PW
Wedges: Vokey SM54.10 & SM60.04Putter: T.P. Mills StudioBall: GamerBag: Warbird Stand


Posted
In my personal experience:

Callaway: Much less forgiving, a tournament player club, very low handicap. Workable, VERY playable for fades and draws. More advance of a driver

while...

Taylormade: Overal better. Not as long, but much, much more forgiving. Harder to work, but the ball just goes straight.

I used to spray my callaway 315 yds, left right backward... everywhere. Switched to the superquad, and although I may only get it out there 300 on a good poke, its dead straight everytime. The taylormade seems to have a MUCH higher lofty ball flight.

In The Huffer:

Driver: Superquad 10.5* Aldila NV-S Shaft
3w: 975 F
Hybrid: 22 Degree Baffler Multimetal3-PW: LCG Burner IronsSW: 56 Degree 588 GunmetalPutter: DfX No 2Balls: ALWAYS NXT Tour #3's, or NXT Extreme #3'sHome Course: Glenmoor Country Club: Jack Nicklaus Signature Course. 7015...


Posted
No clue, love my Taylormade putter, but never tried a driver that felt like a good fit
Posted
  Jack_2251 said:
Yes thanks for the reply guys, I realise they pay big $$$ to get pro's to use them, but they also must be good because a lot of people who aren't paid use them, so what is so good about them: are they:

What matters is the swing and the impact. Figuratively TaylorMade is cherry flavor of your favorite gum, while Callaway is orange, Titleist is apple, etc.

Seriously, it's how good you are NOT how good your club is. However, to answer your question I think there's a good reason why TaylorMade claims to be "#1 Driver in Golf" similar to Titleist's "#1 Ball in Golf." You be the judge.
What's in the bag:
Driver: r7 SuperQuad 10.5° ~ UST Proforce V2 65g Regular
Wood: 906F4 18.5° ~ Aldila VS Proto 80g Stiff
Irons: MP-60 3-PW ~ True Temper Tour Concept S3
Wedges: Vokey Oil Can 252.08, SM56.10 & SM60.08Putter: Marxman Mallet 33"

Posted
I switched from a Titleist 983k to a Taylor Made r7 425 driver because it was more forgiving on miss hits for me. I tried a friends R5 TP driver and liked it and have been playing that club for the last 8+ months.

My buddy, James is a 3 handicap golfer still plays with a 983k Titleist but he hits it more consistently that I do, he's like the Bryon machine.

I recently compared my old Titleist 983K and R5 on the driving range and noticed that after several drives that my R5 was longer and kept it in my bag. If I were to replace this driver I would consider either the Taylor Made
r7 SuperQuad TP or Taylor Made new Burner TP.

I also love the magnetic head covers on my TP driver.

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1


Posted
If you want a magnetic headcover...you can buy a TaylorMade branded magnetic headcover for $30 vs the hundreds more for the TP driver.

I myself....bought a generic magnetic heacover for $15. They are great....especially with the 460cc pumpkin sized heads. Magnetic covers should be standard for all big head driver!

  • 2 weeks later...
Posted
where is a good spot to shop for magnetic headcover... generic?
I love my magnetic putter cover!
I assume they open wide, pull over, the magnet graps???
Any features to look for ??? 1 magnet? 2 magnets?, etc??

Driver :T Edge CB-1 or Cally Mini Driver 14* or GBB 11*
Tour Edge CB2 15* 3 wood (Best Club Ever!)

Callaway XR 5Wood (New BCE!)

Hybrids: Nike SQ 23*  Tour Edge 28*

Irons: TMade RAC  7-PW   T Flight 56 SWedge
Putter: Odyssey 2 Ball Blade, SStroke flatside to hole


Posted
My other choice was a double zipper headcover...
like the ones Callaway makes...
Any experience with Double Zip vs, Magnetic ???

Driver :T Edge CB-1 or Cally Mini Driver 14* or GBB 11*
Tour Edge CB2 15* 3 wood (Best Club Ever!)

Callaway XR 5Wood (New BCE!)

Hybrids: Nike SQ 23*  Tour Edge 28*

Irons: TMade RAC  7-PW   T Flight 56 SWedge
Putter: Odyssey 2 Ball Blade, SStroke flatside to hole


Note: This thread is 6435 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Popular Now

  • Posts

    • Personally I'd have them rotate the player who hits the fourth shot and have them hit four shots each time. Then handicap I'd make it 0.25 * A + 0.2 * B + 0.15 * C + 0.1 * (A + B + C)/3.  If you don't want to have someone hit twice every shot, then rather than saying they can for one tee shot, I'd give the team of three one time per hole that they can have one of their players (at their choice) hit a second shot. If they use it on the tee, then they can't use it anymore. I'd think putting is where it could be most valuable since it has the starkest contrast between good outcome and bad outcome, but off the tee if you have nothing in play would obviously be where you'd want it. Do the handicap the same way - the difference then would be that they could always pick their best player to hit the extra shot, but they still get the extra handicap strokes for the worse players so it somewhat evens out. If you're set on only having them hit three shots at a time, then you'd need to figure out a way to handicap it fairly. I agree with Erik in his example that 8.5 doesn't feel like enough. Only one extra stroke for 50-60 extra shots on the round (I'm assuming there will be quite a few putts where the D player wouldn't be needed and they're not going to be shooting 15 under) seems like not a lot. My initial reaction was to say you'd want to double the allowances. If you lose the 5 handicap, then you'd get 0.5 x 10 + 0.4 x 15 + 0.3 x 20 = 17 shots. If you lose the 20 handicap then you'd get 11. 3.5 strokes for losing the 20 handicap seems like quite a lot to me, so maybe split the difference? Something like 0.5 x A + 0.35 x B + 0.2 x C could work. That would be 9 shots if you lose the 20 handicap and 14.25 if you lose the 5 handicap.  If the handicaps are more even, let's say they're all 5 handicaps, 0.5 x A + 0.35 x B + 0.2 x C would be 5.25 shots, while the four 5 handicaps would get 3.5. 1.75 shots is probably not enough for losing the 4th go at every shot. If they're all scratch then both teams get 0. More I think about it, I think multipliers might not be the best option. Instead I'd say the four man team gets the 0.25 x A + 0.2 x B + 0.15 x C + 0.1 x D. Three man team gets 0.25 x A + 0.2 x B + 0.15 x C + 4. I think 4 scratch players would beat 3 scratch players at a scramble by somewhere in the 3-5 strokes range on average. The extra man is worth less the worse they get, but that's getting offset by the shots they would be giving the team, so if you lose a 20, you only get 2 extra strokes. Put another way, this is equivalent to assuming you have a fourth player who is never good enough to hit a ball in play, but has a 40 handicap in return. That seems reasonable to me. 
    • If it makes you feel any better, my drive was 336 yards according to shot scope…
    • Roll back the… :checks notes: … altitude!
    • That far away from a 2 on a par 5. 7 iron from 188. 
    • Wordle 1,514 3/6 🟩⬜⬜🟩⬜ 🟩⬜⬜🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...