Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6336 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Does your bottom hand start to blister after hitting a couple buckets of balls? I'm not sure if I'm gripping the club too tight, but if I can't figure it out I might start using a 2nd glove. Thoughts?

In My Bag:

Driver: R7 460
5w: Bah!
3w: F Speed LDHybrid: CPR3 3iIrons: Acer XK High Trajectory 4-PWWedges: Vokey Spin Milled 52* 54* 60*Putter: Daytona CGBBall: One Platinum Tour ix


Posted
I just started playing again after about 10 years off. I use the 10 finger grip and left hand glove only, never remember getting any blisters now or 10 years ago. Right now I'm just trying to get my swing back and havn't hit more than 1 bucket per range visit, I don't want to get too frustrated per visit.

In the Vision SS Bag:

Driver: r7 superquad 10.5* Reax Reg flex
3-Wood: Pinseeker 15* Reg flex
Hybrid 3: r7 Draw Rescue 19* Reg flexHybrid 4: Rescue Mid 22* Reg flexIrons: G2's 5-PW - TFC 100 Regular Flex Wedges: None yet Putter: Monza SpiderBall: Anything cheap for now


Posted
Does your bottom hand start to blister after hitting a couple buckets of balls? I'm not sure if I'm gripping the club too tight, but if I can't figure it out I might start using a 2nd glove. Thoughts?

It's got nothing to do with the grip imho, its probably the grip pressure. try loosening up. Maybe use a 2nd glove for extra grip.

I don't use a glove at all; and I don't get blisters(just callouses - one under every finger.)

Posted
It only happens on my left pinky and ring finger. It might be the grip pressure because I have a tendency to grip a little tight.

I'm going to try a 2nd glove and see how that goes.

In My Bag:

Driver: R7 460
5w: Bah!
3w: F Speed LDHybrid: CPR3 3iIrons: Acer XK High Trajectory 4-PWWedges: Vokey Spin Milled 52* 54* 60*Putter: Daytona CGBBall: One Platinum Tour ix


Posted
It only happens on my left pinky and ring finger. It might be the grip pressure because I have a tendency to grip a little tight.

I personally think that solutions like this treat the symptom and not the cause.

In my bag:

Driver: SQ 9.5, Graphite Stiff Shaft
3 Wood: Diablo 13 degree, Stiff Shaft
2 Hybrid: SQ 18 degree, Steel Stiff ShaftIrons: MP-30, 3-PWSW: 56* Vokey Copper spin-milledFW 52* VokeyFlat Stick Zing 2Ball: Pro V1x


Posted
Why do you guys use a ten finger grip? Have you tried other grips?
Does it help w/ slicing/hooking, etc.

Posted
Why do you guys use a ten finger grip? Have you tried other grips?

I use it because its the most natural for me. Not sure why it feels more natural but I've tried other grips and they just don't feel right to me. I do need to take some lessons as I'm just getting back into golf and may try some of the other grips with an instructor and see if any work better for me.

It certainly doesn't help with slicing for me.

In the Vision SS Bag:

Driver: r7 superquad 10.5* Reax Reg flex
3-Wood: Pinseeker 15* Reg flex
Hybrid 3: r7 Draw Rescue 19* Reg flexHybrid 4: Rescue Mid 22* Reg flexIrons: G2's 5-PW - TFC 100 Regular Flex Wedges: None yet Putter: Monza SpiderBall: Anything cheap for now


Posted
I use it because its the most natural for me. Not sure why it feels more natural but I've tried other grips and they just don't feel right to me. I do need to take some lessons as I'm just getting back into golf and may try some of the other grips with an instructor and see if any work better for me.

If you want to take the game seriously, I would highly recommend a grip change. I remember making the change as a kid, it will feel weird, but a ten finger grip is not worth hanging on to, none of the tour players use it for a reason.

Most (like Tiger) use an interlocking grip. I prefer an overlap.

In my bag:

Driver: SQ 9.5, Graphite Stiff Shaft
3 Wood: Diablo 13 degree, Stiff Shaft
2 Hybrid: SQ 18 degree, Steel Stiff ShaftIrons: MP-30, 3-PWSW: 56* Vokey Copper spin-milledFW 52* VokeyFlat Stick Zing 2Ball: Pro V1x


Posted
I was reading up on grips before my last range session and I tried out the overlap and the interlocking grips. The interlocking felt the worst and the overlap was just kinda different and I was probably not doing it perfect so thats near the top of my list for my lessons along with everything else.

In the Vision SS Bag:

Driver: r7 superquad 10.5* Reax Reg flex
3-Wood: Pinseeker 15* Reg flex
Hybrid 3: r7 Draw Rescue 19* Reg flexHybrid 4: Rescue Mid 22* Reg flexIrons: G2's 5-PW - TFC 100 Regular Flex Wedges: None yet Putter: Monza SpiderBall: Anything cheap for now


Posted
This is my first post, so, hello!

I'm a 15 handicap currently and I use the baseball grip. Would I benefit from a change to the interlocking/overlap?
In My TerraFirma Xi Bag:
Driver: R7 460 10.5° Fujikura REAX stock R-flex
3-Wood: Big Bertha Titanium RCH 75w Firm stock shaft
Hybrids: 585H 19.5° 4175 stock shaft
Irons (4-10): Big Bertha TT shaftsWedges: CG12 Black Pearl 52°10, 56°14, 60°10Putter: Studio Select Newport 33"Ball: ...

Posted
I cant get comfortable with the interlocking so I did baseball up till this year then i switched to Vardon Overlap grip and it took some getting used to. It felt like the club was gonna fly out of my hand ever time i swung... but after i got used to it it really helped me get the club turned over.. I would say try it for a whole round or at least a whole bucket at the range...

Posted
I also use the baseball grip as it is most natural for me after years of playing baseball. The interlock and overlap grip makes me feel like I'm going to lose the club on the follow thru. I don't get blisters, but I try to keep a loose grip on the club. Also, if you don't already, try keeping the grip of the club in your figers and not gripping it with your palms.

Posted
Well,

I've actually experimented with it and I actually hit well with the baseball grip. Maybe I'll try doing the Vardon or the interlocking next time I go to the range - hit a bucket on either and see where I go. The problem is that none of the ranges around here are grass - they're all mats, and it's hard to properly hit irons on them. Also, I don't usually have a problem with slices or hooks - my shots are usually straight. It's hitting it fat, thin or on the toe that I have issues with, and that's usually stance related.

I think I'll stick with what works for now.
In My TerraFirma Xi Bag:
Driver: R7 460 10.5° Fujikura REAX stock R-flex
3-Wood: Big Bertha Titanium RCH 75w Firm stock shaft
Hybrids: 585H 19.5° 4175 stock shaft
Irons (4-10): Big Bertha TT shaftsWedges: CG12 Black Pearl 52°10, 56°14, 60°10Putter: Studio Select Newport 33"Ball: ...

Posted
This is my first post, so, hello!

If you want to get at least semi-serious, then I would say yes. If you just want to go out a few times a year and have fun, I'd say it might not be worth it.

In my bag:

Driver: SQ 9.5, Graphite Stiff Shaft
3 Wood: Diablo 13 degree, Stiff Shaft
2 Hybrid: SQ 18 degree, Steel Stiff ShaftIrons: MP-30, 3-PWSW: 56* Vokey Copper spin-milledFW 52* VokeyFlat Stick Zing 2Ball: Pro V1x


Posted
If you want to get at least semi-serious, then I would say yes. If you just want to go out a few times a year and have fun, I'd say it might not be worth it.

Yeah, definitely going semi serious, play in a few amateur/informal tournaments. I also need to invest in some lessons.

In My TerraFirma Xi Bag:
Driver: R7 460 10.5° Fujikura REAX stock R-flex
3-Wood: Big Bertha Titanium RCH 75w Firm stock shaft
Hybrids: 585H 19.5° 4175 stock shaft
Irons (4-10): Big Bertha TT shaftsWedges: CG12 Black Pearl 52°10, 56°14, 60°10Putter: Studio Select Newport 33"Ball: ...

Posted
Update: Just hit two buckets with the Vardon grip. Definitely has its benefits over the baseball grip. I had less wrist action on the downswing and was hitting them square. I'll be sticking with it. I tried interlocking for a few balls, didn't like it.
In My TerraFirma Xi Bag:
Driver: R7 460 10.5° Fujikura REAX stock R-flex
3-Wood: Big Bertha Titanium RCH 75w Firm stock shaft
Hybrids: 585H 19.5° 4175 stock shaft
Irons (4-10): Big Bertha TT shaftsWedges: CG12 Black Pearl 52°10, 56°14, 60°10Putter: Studio Select Newport 33"Ball: ...

Posted

Traditionally, a 10 finger grip would promote a slice as your hands don't always want to turn over. However, I played a lot of baseball so I always swung a bat like that and always turned my hands over. I was a pull hitter all the way

I've found that it feels more natural and actually helps me avoid a slice. I always had a problem with swing plane which is what caused the slice. I took a few half swings with different grips, stopped at the top and looked at the angle of the club and it was never on plane. I tend to swing too vertical. Well, I found out that my wrists are very stubborn and an interlocking or overlap grip was not allowing my wrists to hinge correctly, thus making me push the ball. The ten finger grip allows me to get my wrists into the right position to come down on a good angle.

There's one thing I never took into account with this grip, though. I was hitting before the ball on most iron shots and wasn't getting any distance at all and pushed a lot of em short and left. What I didn't compensate for is that extra 1/2" of length you get out of the club by having the extra finger. The driver was fine because I always stood far away as is, so I ended up hitting the last bucket with my driver and 3 wood because I was going nuts not being able to diagnose the problem.

I'll know better for next time and expect much better results.

All I know is that I took my driver out of my bag because I could never hit it, but now I can pipe it 250 yards with range balls and a beat up clubface. I took a dirty Nike Platinum out of my bag from last year that wasn't gonna get used and it ended up about 260. I'm completely satisfied.

In My Bag:

Driver: R7 460
5w: Bah!
3w: F Speed LDHybrid: CPR3 3iIrons: Acer XK High Trajectory 4-PWWedges: Vokey Spin Milled 52* 54* 60*Putter: Daytona CGBBall: One Platinum Tour ix


Posted
Now, all that said, what do you guys think about using two different grips? Ten finger with the driver because it's the most similar to a baseball swing and an interlocking with the irons since distance isn't an issue and it usually warrants more control. I'm not a stickler for grips and can hit the 3 big ones all fairly easily.

I've played with guys who hit righty all the way to the green then pull out a left handed putter.

In My Bag:

Driver: R7 460
5w: Bah!
3w: F Speed LDHybrid: CPR3 3iIrons: Acer XK High Trajectory 4-PWWedges: Vokey Spin Milled 52* 54* 60*Putter: Daytona CGBBall: One Platinum Tour ix


Note: This thread is 6336 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 152 1-12 More reps bowing wrists in downswing. Still pausing at the top. Making sure to get to lead side and getting the ball to go left. Slow progress is better than no progress.  
    • Yea, if I were to make a post arguing against the heat map concept, citing some recent robot testing would be my first point. The heat map concept is what I find interesting, more on that below. The robot testing I have looked at, including the one you linked, do discreet point testing then provide that discrete data in various forms. Which as you said is old as the hills, if you know of any other heat map concept type testing, I would be interested in links to that though! No, and I did say in my first post "if this heat map data is valid and reliable" meaning I have my reservations as well. Heck beyond reservations. I have some fairly strong suspicions there are flaws. But all I have are hunches and guesses, if anyone has data to share, I would be interested to see it.  My background is I quit golfing about 9 years ago and have been toying with the idea of returning. So far that has been limited to a dozen range sessions in late Summer through Fall when the range closed. Then primarily hitting foam balls indoors using a swing speed monitor as feedback. Between the range closing and the snow flying I did buy an R10 and hit a few balls into a backyard net. The heat map concept is a graphical representation of efficiency (smash factor) loss mapped onto the face of the club. As I understand it to make the representation agnostic to swing speed or other golfer specific swing characteristics. It is more a graphical tool not a data tool. The areas are labeled numerically in discrete 1% increments while the raw data is changing at ~0.0017%/mm and these changes are represented as subtle changes in color across those discrete areas. The only data we care about in terms of the heat map is the 1.3 to 1.24 SF loss and where was the strike location on the face - 16mm heal and 5mm low. From the video the SF loss is 4.6% looking up 16mm heal and 5mm low on the heat map it is on the edge of where the map changes from 3% loss to 4%. For that data point in the video, 16mm heal, 5mm low, 71.3 mph swing speed (reference was 71.4 mph), the distance loss was 7.2% or 9 yards, 125 reference distance down to 116. However, distance loss is not part of a heat map discussion. Distance loss will be specific to the golfers swing characteristics not the club. What I was trying to convey was that I do not have enough information to determine good or bad. Are the two systems referencing strike location the same? How accurate are the two systems in measuring even if they are referencing from the same location? What variation might have been introduced by the club delivery on the shot I picked vs the reference set of shots? However, based on the data I do have and making some assumptions and guesses the results seem ok, within reason, a good place to start from and possibly refine. I do not see what is wrong with 70mph 7 iron, although that is one of my other areas of questioning. The title of the video has slow swing speed in all caps, and it seems like the videos I watch define 7i slow, medium, and fast as 70, 80, and 90. The whole question of mid iron swing speed and the implications for a players game and equipment choices is of interest to me as (according to my swing speed meter) over my ~decade break I lost 30mph swing speed on mine.
    • Maxfli, Maltby, Golfworks, all under the Dicks/Golf Galaxy umbrella... it's all a bit confounding. Looking at the pictures, they all look very, very similar in their design. I suspect they're the same club, manufactured in the same factory in China, just with different badging.  The whacky pricing structure has soured me, so I'll just cool my heels a bit. The new Mizuno's will be available to test very soon. I'm in no rush.  
    • Day 23 - 2026-01-12 Finally outdoors again with 10 minutes of 7 iron work in the net. Also mirror work. Excited to get back on the range tomorrow and maybe do some film.
    • Day 10: 2026.01.12 Hit 25 balls at the range, working on rotating right hip during backswing.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.