Jump to content
IGNORED

Utley pitching method - using the wedge bounce


Note: This thread is 5650 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I have just read the Utley short game book. Have tried his method at the driving range and except the chipping method I think it is great. However, I don't understand the bit where he wants to use the bounce of the club when pitching. He wants the sole of the club to hit the ground before the ball. I just don't understand this bit - surely he doesn't want you to hit pitch shots fat. I like his pitching method but I think I am getting "ball first contact". Any help would be greatly appreciated..............

Driver: 907 D2 10.5 deg V2
3 Wood: 906 F4
5 Wood: 906 F4
Irons: 755 3 - PW
Wedges: Spin Milled. 56, 60Putter: Newport

Link to comment
Share on other sites


I think Utley just means that you should hit the ball and the ground at the same time. (If you do catch it a bit fat, you'll get away with it. If you catch it a bit thin, you'll get away with it.) It's completely different from his chipping technique where you want to hit the ball first.

In my Ogio Ozone Bag:
TM Superquad 9.5* UST Proforce 77g Stiff
15* Sonartec SS-2.5 (Pershing stiff)
19* TM Burner (stock stiff)
4-U - PING i10 White dot, +1.25 inches, ZZ65 stiff shafts55*/11* Snake Eyes Form Forged (DGS300)60*/12* Snake Eyes Form Forged (DGS300)Ping i10 1/2 MoonTitleist ProV1

Link to comment
Share on other sites


I am familar with this method. My take on using the bounce is really moving away from a "very steep" downward strike which takes a big divot to more of an around the body swing (still hitting down) but using the bounce of the club to hit the ground and "slide" through the ball, taking a very small divot (normally it would be considered a skid mark).
My Sticks
Driver - Adams Tech A4 9.5* Matrix Xcon 7 X flex 266 Freq
3Wd - Exotics CB2 15* Motore F1 S flex tipped to 275 Freq
Hybrid - Taylormade Rescue TP 17* & 21*
Irons - 4 thru PW Mizuno MP 62 +1/2 X100 shaftsWedges - Vokey 52* and Scratch Golf WLD grind 58*Putter - Rife IBF Tour Assie custom fitGri...
Link to comment
Share on other sites


actually, I do this when the grass is thin and the ground is hard. It's just a feeling where you smack the sole of the club on the ground and it'll have enough bounce that it won't get caught in the turf and will slide into the ball. You really gotta smack that sole down for that to work though.
Link to comment
Share on other sites

Awards, Achievements, and Accolades

Note: This thread is 5650 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • When I lived in Oregon my friend had a rule. It could only be 2 of the following 3 items for us to play. If all 3 we’d skip.    1. Windy (20+) 2. Rainy (needs to be steady, rain in Oregon is pretty common) 3. Cold (less than a high of 50) This was a pretty solid rule.    
    • Day 74: Worked on priority piece, full swing for about an hour this evening after dinner. Really need to exaggerate “hitting to right field feel” more than I think to produce slight push draw ball flight. 
    • Day 170 - Got some good work in on the short game, as well as more work on my priority piece. 
    • I searched around but didn’t see any other threads on this so I’ll put it here. I work in the laser industry and one of the applications has been additive manufacturing. The main market for the past 10 years has been SpaceX and the space industry and some medical applications. The new one I saw this week is 3D printing irons. Cobra and the company that they are using is marketing these irons pretty aggressively.  In talking with the folks in the booth at the trade show, the claim is that they can gain strength but reduce the weight to put it exactly where they want. The print of the iron is very cool. Mostly everything behind the face is a thin metal lattice and then in the heal and toe is a block of tungsten for weight.  I am old enough to remember the arguments about forged versus cast irons. I wonder if folks here will pay a bit more to get 3D printed irons.  They have a booth here where you can hit them but I hate lines and the line to do it is always long. I go again tomorrow, and if the line isn’t too long I’ll give it a try and report back.    Here are some pictures (I had some trouble uploading, I’ll try later)      
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...