Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6106 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I'm starting to wonder if my lie angles are off. For some reason, the last few rounds, I've sprayed more than my fair share of shots. Then I noticed: it's my 56°, my 47°, my 8-iron, and my 4-iron. So I'm starting to wonder if I should get my lie angles checked.

But then I need to know when to do this. I'm going to have a lesson in a little more than a week. Should I get them checked (and fixed, if appropriate) before my lesson, or should I show it to my instructor and see if he has any suggestions on what angles (etc)?

Other than fittings, I've never had these checked, so I have no idea what I should expect, or even how it works. Are there dynamic lie fittings for existing clubs?

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted
For forged clubs, the lie angles are always a concern. More so if you hit off mats at the driving range. I got mine checked last week and found that 5 of them were off by a full degree. I usually get mine checked twice a season. The factory lies might also be bad for you, so have the instructor take a look at them. He should measure you, and have a lie board with impact strips for the sole to show you what youre doing.

Generally, if your hitting balls off of the toe, the clubs might be too flat. Torwards the heel, and they might be too unpright. But also, you might be doing something wrong in your address or swing, which is why having a pro there might be handy.
THE WEAPONS CACHE..

Titleist 909 D2 9.5 Degree Driver| Titleist 906f4 13.5 degree 3-Wood | Titleist 909 17 & 21 degree hybrid | Titleist AP2 irons
Titleist Vokey Wedges - 52 & 58 | Scotty Cameron Studio Select Newport 2 Putter | ProV1 Ball

  • Moderator
Posted
For forged clubs, the lie angles are always a concern. More so if you hit off mats at the driving range. I got mine checked last week and found that 5 of them were off by a full degree. I usually get mine checked twice a season. The factory lies might also be bad for you, so have the instructor take a look at them. He should measure you, and have a lie board with impact strips for the sole to show you what youre doing.

I agree. In forged irons, over time, the angles can change from hitting off mats or hard pan,etc... I also had mine checked about a month ago at Golfsmith and I had about 5 or 6 that were at least a half degree off and some were more.

Bryan A
"Your desire to change must be greater than your desire to stay the same"

Awards, Achievements, and Accolades

Posted
I'm starting to wonder if my lie angles are off. For some reason, the last few rounds, I've sprayed more than my fair share of shots. Then I noticed: it's my 56°, my 47°, my 8-iron, and my 4-iron. So I'm starting to wonder if I should get my lie angles checked.

I was pretty superised how off my irons were in the lie and loft department when I bought them. Went and got them adjusted for lie and at the same time had them bend them to the correct lofts.

The guy doing the adjusting for me carries a $100 bill for the person who says there irons are spot on coming straight from the factory. He says every single set has more then 50% of the irons off in lie and loft.
DBake
Titleist 909D3 10.5* Tour Green 89 Stiff
Titleist 906F2 15* v2 85 Stiff
Mizuno MP-30 2-PW S300
Mizuno MP-R 52* & 59*Scotty Cameron Studio Design 1.5Titleist Pro V1Leupold GX-1The Home Course (75.7/130)

Posted
DBake where is that shop???? I have some irons for him to check out!!! I know they are spot on!!!! I have measured them myself then i bent them to spec!!!! We like to forget that we are dealing with pieces of metal and it is an art not a science so things are not always dead on, you have to have some kind of manufacturing tolerances!!!! Also what is he using to measure them?? I hope it is not a loft/lie machine because they are not very accurate!! You need a much more precise machine for reliable readings!!!

Whats in the bag?
Driver = Wishon Golf 949mc 9.75*/.5* Closed Face Angle
Fairway Wood = Wishon Golf 915 F/H 16* Square Face Angle
Wood Shafts = Wishon Golf Pro Flight EXP 85g Stiff Flex
Hybrids = Wishon Golf 331H 21* & 24*Hybrid Shafts = Wishon Golf GI335 Tour Weight 92g Stiff FlexIrons = Wishon...


Posted

I say definitely get them checked, I posted a similar thread recently and just had them checked and most were 4-5 degrees upright. The guy said it was the about the worst he had ever seen. He told me that leaving your clubs in your trunk in the summer can sometimes cause them to bend a lot because the temps can get up to 200... *And I hit off mats all winter long*

I was having problems with a pull and or hook and decided to get them checked. The interesting thing now is that after two years of trying to hit more of a push draw and failing, all I can hit with these irons now is a push at least for now. The clubs are set to standard lie angles now and all of my compensations cause the ball to shoot right without much spin.

The moral of the story is that it's too bad that the swing that I naturally wanted to use that pulled the ball was probably more along the lines of a proper swing but I didn't know it because my clubs were bent for someone about 6'7 or nine inches taller than me.


Posted
If you are spraying them left and right, I would not suspect the lie angle, especially if the same club is going both directions. That would make me think swing consistency. If all your shots with your irons are going one way, then I could see the lie angle being off.

See what the pro thinks during your lesson, I think that makes the most sense.

WTIB:
Callaway FT-9 Tour 9.5° Scads of shafts - now: Kai'li 63 stiff
Tour Edge Exotics 3 & 5 FW
Callaway X-22 Tour irons
Bobby Jones 3 & 4 hybridsRife Abaco/Odyessy Black Series i9 puttersWith a few more hangin' around


Note: This thread is 6106 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.