Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5981 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

so im getting a new 5 wood off of Ebay soon and these are my two options. ive hit both of these clubs in a 3 wood and i love the sound and feel that steel headed clubs have. also they have a smaller head than usual and sit well behing the ball. Im getting a 5 wood so has anyone else hit them and how do you like them? also are the v steel fairways actually "steelheaded" like the callaway? and any other opinions would be very appreciated! thanks

G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"

Posted
anybody ?
G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"

Posted

They are both really good fairway woods -- classics really.

I have a V-Steel 3W and 5W, even though I game a Tour Edge Exotics 4W in place of both of them most of the time. Occasionally I drop the V-Steels back in the bag and pull my 19º hybrid. I hit them well -- the V-Steels are just very solid clubs. For quite a few years the V-Steels were the most popular fairway woods on the PGA tour and for good reason.

Same with the Cally Steelhead Plus. I have a good friend who plays a Steelhead Plus 3W and 5W and I doubt they'll ever leave his bag until he literally breaks the heads.

Pick which one you like the best (look at address, etc.) and also consider which one's shaft will likely fit your game the best. Either one is very solid and if you can't hit them don't blame the clubs.

What's in my bag (most of the time)

Exotics 12°, Aldila VS Proto 65S
Exotics CB1 4W, 16.5°, Fujikura Stiff
3DX DC Ironwood 20°, 23°, 26º Hybrids, Proforce V2 Stiff Acer XP905 Pro 6-PW, Dynalite Gold S300Inazone CNC Spin Satin GW 50°/8°, SW 54°/14°, LW 58°/4°Boccieri...


Posted

I would say TaylorMade but then I might be a little biased

Driver-Callaway FT-5 Draw 9.5"

3WD-Callaway Hawkeye 15*

Hybrid-Callaway FT 21*

Irons-Callaway Steelhead X-16 4-P

Wedges-Callaway Big Bertha Tour 52* 56* 60*

Putter-Odyssey White Hot #1


Posted
I would say TaylorMade but then I might be a little biased

hahaha i can see that rmccabe! no kidding!

anybody else? which do you think is longer, or more forgiving? and also the steelheads are easy as pie to hit of the deck but what about the v steel?
G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"

Posted
I have the Callaway Steelhead Reissue woods(essentially Steelhead Plus' with gray paint) and love them. The 3 and 5 woods are go-to clubs for me. I actually have two sets, Dr-3-5-7, with the M10 steel shafts. I have used them for many years, and tested many newer, but the Steelheads remain. The 5 occasionally gets swapped out with my 19* hybrid depending on the course and weather.

In my  Warbird Hot stand bag:
nike.gif Dymo2 Str8 fit 10.5 or  HiBore XLS 10.5,  Steelhead Plus 3 and 5 woods,

 NP2 3H,  DCI 990 4-PW,  Forged + 54/12,  RAC 58/8,

 Classic #1,  NXT Tour or  Burner TP
 


Posted
I play the V-steels and they are very good clubs. Nice classic look at adress and nice sound when struck well.

Fitted mine with Proforce V-2 75 Stiff shafts. Good combination! Helped a lot on my trajectory wich was a bit high with the stock shafts.

Have not tried the Callaways.

What I Play:
Ping Rapture V1 9° stock UST stiff | Taylormade V-steel, 15° and 18°, UST Proforce V2 stiff | Mizuno MP-57 3-PW Project X 5.5 | Titleist Vokey Spin Milled 52.08/58.12 | 35" Scotty Cameron Studio Select | Titleist Pro V1 | Leupold GX-1 Rangefinder


Posted
I heard about those Callaways.

They're meant to be great.
Wouldn't cost too much either.
Give them a go.


I don't know about the Taylormades but people think the steel-heads are the best fairway woods made.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
Thanks for the info guys! what about the sound? i have hit the steelheads alot mor than the v-steels, and i know that they made a pretty exploding load sound at impact, but its still crisp. Its been a while since ive hit the v-steel so i cant remember if it has that same sound or is a little less of that "ping" sound. any comments? thanks alot!
G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"

Note: This thread is 5981 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 7: got out my chipping net and worked on chipping in the living room for a solid 15 minutes. Worked on mostly low shots, but mixed in a couple of high shots as well. 
    • Day 228 4-4 More hip/chest turn and wrist arching. Working on hinging wrist a bit later. Foam balls. 
    • Day 27 (4 Apr 26) - Worked with grandson on basic pitches/punches in the back yard with varied irons/wedges.  Wrapped up the day rolling some putts on the 30’ carpet I can set up in the yard to give varied terrain - and this carpet rolls almost too easy. A great way to figure a read and know that pace has to be near perfect to get in the hole.  
    • A bit of a struggle today.  Just some thoughts/musings.  For the backswing, it is like I am never going to be moving on from this. I don't know if I can ever get to the point where the backswing isn't like over 1.5 seconds in duration. Which is probably not ideal. I would like to get to the point where I can just fling the arms back and up.  I have to feel like my hands are going to hit my right thigh from P1 to P2. If not then they like to move 2-5 inches towards the ball from P1 to P2. Then it's just bad from there. This feeling is my hands not gaining much depth, just maintaining depth from set up. From the DTL view, the hands head towards the camera.  While I am doing that, hinge the crap out of the club with my wrist only. Hinge in a way that the club is pointing at the camera at P2.  From P2, lift the hands straight up. I can get here, and still roll the club inside and get it way too shallow.  With the downswing. There isn't much here. I still can't get the flow of this or the sequencing of this to line up. It doesn't help that hinging from P1 to P2 just throws off my entire timing as well.   
    • Day 550 - 2026-04-04 Practiced in the sim at a club for awhile. Did a SW ladder and practiced for awhile with my 7I.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.