Jump to content
IGNORED

Teen Clubs?


Note: This thread is 4915 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

We held off as long as we could, but it looks like we'll be getting my son some new clubs for Christmas. Any additional thoughts from the forum?

I am leaning towards going with a local clubfitter that sells KZG clubs. He made my son a driver last summer that worked pretty well. However, I know that a full set of irons and a hybrid or two will be pretty pricey, so I am looking for other options.

TIA

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003

Link to comment
Share on other sites


My son started when he was 13 (same hight as the average 12 yr old). I pulled the shafts (Dynamic Gold regular) from a fairly new set of Adams Idea A1 Pros (very nice set that graduates from muscle back short irons to hollow back mid to long irons). I stepped the shafts back (so 4 iron shaft into the 6 iron and so on) and cut the shafts down 1/2 inch. The shafts played a bit stiffer than womans. I re-gripped with a junior/womans grip. The set was perfect for him and he loved them for 2 years. He started playing the clubs choking down a little and adjusted his grip as he grew. He's 15 now and I just put him into my old CG2's (project X 5.0, cut down 1/4 inch)...

I still have the clubs and they are in really great shap...let me know if you're interested...(asuming you don't go for new)

If you go for new, I would pick up a set at rock bottom golf and do what I did. They have the Nickent 3DX irons on for $150 (regular $500 when they came out), pull the shafts out, step them back twice and cut them down 1/2 inch under standard (remember, you'll be taking about an inch off because you're stepping back). You can buy grips on ebay for $2 each. All total with some labor cost (if you don't do it yourself), $200-$225.

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


Just noticed they still have these clubs for sale. http://www.rockbottomgolf.com/cosmo-...et-steel.html# $49

The clubs look like a Ping i5/i10/i15 knockoff and are made of 17-4 SS. The Rifle Precision Steel shaft alone are worth near $200 retail. Cosmo golf was a components company that used to supply Golf Town (same as Golf Galaxy) and a lot of Pro shops with full sets and components. My first set 9 years ago was as set of Precision II's with Dynamic Gold shafts, they were great clubs. Cosmo Golf made a quality product. They are no longer in business, folded about 2 years ago...

Step these shafts back, they would be the perfect set for your son, mid-size head with minimal offset...

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


Women's club is a very good option. I think Adams has a 7 piece and a 14 piece set for women. Not sure how old your kid is but they have petite clubs for women so that's an option if your kid is on the shorter side.

« Keith »

Link to comment
Share on other sites


I stepped the shafts back (so 4 iron shaft into the 6 iron and so on) and cut the shafts down 1/2 inch.

Or do you mean the 6-iron shaft went into the new 4 iron? You want to go shorter, right? Sorry, but I have not heard of stepping back. Does this result in a different net stiffness or length than simply cutting each club down by 1"? And then since you moved shafts from one head to another, do you need to buy two new shafts?

What was the net decrease in length from a standard men's set?
Women's club is a very good option. I think Adams has a 7 piece and a 14 piece set for women. Not sure how old your kid is but they have petite clubs for women so that's an option if your kid is on the shorter side.

He is about 4'11", but I think he is just now entering a growth spurt. What about the Nike VR cavity back women's set?

Nike Womens VR cavity back at TGW I can get them at another web site for $299. I could cut them down a 1/2" or so, and I think the length would be perfect. Then I would just need a hybrid or two. The Nike VR full cavity above comes with a graphite shaft. Is there anything different about cutting down a graphite shaft? I would think that the graphite shaft would be better for a junior, since I'm trying to save weight wherever I can. I notice that most graphite shafts are 30-40 grams lighter than steel.

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003

Link to comment
Share on other sites


Or do you mean the 6-iron shaft went into the new 4 iron? You want to go shorter, right? Sorry, but I have not heard of stepping back. Does this result in a different net stiffness or length than simply cutting each club down by 1"? And then since you moved shafts from one head to another, do you need to buy two new shafts?

No, you want to step them back, 4 iron to 6 iron, this will reduce the flex (your not doing it to adjust weight). Once they are stepped back, you cut them 1/2 inch below standard mens length. (because you are stepping them back, they will already be longer, so that's what I meant by cutting them down an inch, just do some measuring before (some five irons jump 1/2 inch whereas the 6 through PW progress by 1/4 inch). By stepping back 2 clubs, you are going to reduce the flex by about 2/3rd's of a flex point, so slightly stiffer than womans. By cutting them down 1/2 inch, you will also reduce the swing weight, so they will feel lighter, but they will not have the whippy characteristics of a womans graphite shaft; the clubs will play more accurate. All that you are doing by stepping back and cutting down is producing more flex, a bit less swing weight and a length that will fit your son. He will most likely have to choke down 1/2 inch to an inch, but this is perfect, he'll have a set he can grow into. Just use some tape to measure the lie angle; this will determine where he grips, then remeasure as he grows.

By putting my son into a steel shaft which was a bit more stiff than womans graphite and a bit heavier, he was able to produce better tempo as he learned the proper swing. 3 years later he's gone from driving the ball 150 yard to 225-250 (he's now 15); he hits a wedge 100 yards and sticks the green. Buy the precision II's for $49, any of the Canadians on the board who have been around for a while can tell you they make a very quality product, like I said, the shafts alone are $200 retail. 17-4 steel is 17-4 steel, many of the top manufactures still use it. Cosmo golf had been around 20 plus years, their iron head will be very well balanced. This particular set is just like the Ping i5's but the longer irons progress into more of a G5 profile (wider sole), mid to short irons will suit any intermediate player...

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


forgot to mention...as for the missing clubs, you"ll be stepping back 2 so his set will stop at 5 iron. He really doesn't need the 4 or 3, but you could buy him a hybrid to fill the gap. Just buy a mens hybrid with senior shaft and cut down. I did this for my son with an old Taylormade dual 4 hybrid (regular shaft); within a year he was hitting high 170-180 yard shots with it. Buy the Precision's, add a hybrid and a cleveland Junior SW and he'll have a great set, all for under 200 bucks...

The Victory Reds are nice too, but looks like they are $399, by the time you add a Hybrid, you're in for $350-$400. The Precision's are made with the same 17-4 steel and would probably cost $150 after you have them professionally altered, less if you can save the grips. Because he'll choke down a little, the grips will actually play smaller (as they taper).

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


It's going to be tough if he's going through a growth spurt. If he does get a women's set, I think he should grip down as he grows into them instead of cutting them down.

« Keith »

Link to comment
Share on other sites


It's going to be tough if he's going through a growth spurt. If he does get a women's set, I think he should grip down as he grows into them instead of cutting them down.

Yes, do not cut down the womans set, the swing weight will be so off that he'll not be able to learn proper tempo. If he does get bigger and stronger at age 13, he'll likely swing as fast or faster than an amateur woman anyway. Stepping back a steel set gives you more options as he grows...

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


limoric--thanks for your detailed responses. I guess I know less than I thought I did about the way clubs are built. I always assumed that all of the shafts in a set of irons were the same, and that the tops were cut off to get the shorter shafts for the shorter irons. You are saying that by taking the regular stiffness shaft from a 4 iron, putting it into a 6 iron and then cutting it down by 1", you have a club that is now somewhere between R and L in stiffness? But taking the original 6 iron shaft and cutting it to the same length (say cutting off 1/2") it would be stiffer than the original shaft.

You mention that the stepping back process reduces the flex. If I buy a set of R stiffness clubs, I need to increase the flex (decrease stiffness) to get them close to L stiffness.

How hard is it to pull shafts out of the heads?

What about grips? If I can't save the grips, should I go with the Golf Pride Velvet junior or undersize? You mention $2 grips on ebay. What would you recommend?

Thanks again for your help.

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003

Link to comment
Share on other sites


limoric--thanks for your detailed responses. I guess I know less than I thought I did about the way clubs are built. I always assumed that all of the shafts in a set of irons were the same, and that the tops were cut off to get the shorter shafts for the shorter irons. You are saying that by taking the regular stiffness shaft from a 4 iron, putting it into a 6 iron and then cutting it down by 1", you have a club that is now somewhere between R and L in stiffness? But taking the original 6 iron shaft and cutting it to the same length (say cutting off 1/2") it would be stiffer than the original shaft.

You got it now. You need the proper tools to pull the heads off, It's not too difficult. You can buy a heat gun for $25 and a shaft puller off Ebay for for under $100. These 2 tools are essential if you are going to save the shaft; the tips can bend very easily under high heat, so if you just heat up and twist off, you will ruin the shafts. You may be better off just paying a driving range pro to do it for you. I have the tools because I like to tinker (and I have 4 kids). My driving range pro re-shafts for $5-$7 per club and and re-grips for $0.50.

If you do buy the tools and do it yourself, there are some great tutorials at golf smith. I buy a lot of my components from GolfWorks, which is actually where I bought the grips you asked about. I bought my son these... http://www.golfworks.com/product.asp...HMS_A_cn_E_694 . They're really easy on the hands, but still firm. You can cut steel shafts with a miter saw no problem, just tape the shaft up first. Re-griping is also very easy, you'll need a vice and shaft protector. Golf smith also has tutorials for this too. The precision clubs will be great to work with as they require no ferrule.

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


Another option would be to buy the heads from golfworks or golfsmith, you can get a good intermediate head (don't do the junior thing), for $10-$15 a head. Buy some pulled shafts off ebay for $25-$50 and some grips. Cost at the end of the day will be the same, but the work will be easier and you can do it all yourself (if you're interested in the project)

Start a thread asking the guys what they think would be nice "clean" intermediate head from Maltby or the golfsmith lines and go from there. The respective website also have some pretty good detail as well. Go for less offset, your son does not need it as he's not developed any flaws yet.

As for shafts, you can step back any regular flex shaft. Buy a standard weight though, because you will be shortening them, you will be reducing the swing weight anyway...

Of course the easiest thing to do would be to buy the irons I mentioned, drop them off with the driving range pro and pick them back up in a week

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


You mention that the stepping back process reduces the flex. If I buy a set of R stiffness clubs, I need to increase the flex (decrease stiffness) to get them close to L stiffness.

I still don't quite get this part.

Thanks.

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003

Link to comment
Share on other sites


I still don't quite get this part.

Think of it this way. An iron set gets longer from PW to 3 iron. The length is not adjusted from the butt end, the shafts are tipped to match the weight of the head, your PW being the heaviest. The butt end is trimmed too, but it has little effect on shaft stiffness. When you pull a 3 iron shaft and put it in a 5 iron, you not only lengthen the area of the shaft that bends, the club head is also heavier, so the combination of both produces more flex. Stepping refers to the steps in the shaft, the more steps the more flexible, a 3 iron has more steps than a 5 iron, but the head is lighter, so the flex remains consistent. Typically, 3 steps equals a full flex, so if you soft step a dynamic gold "stiff" 3 times, you'll have a regular shaft. Many club fitters will buy blank shafts, they are all the same size, tipping the shaft will determine the flex, they can create any flex they want.

I could get more specific and discuss frequency and such, but it is not important. Soft stepping a shaft produces greater flexibility, it can also change the kick point, the spot the shaft bends the most, this can have an effect on ball flight (lower kick point higher flight and vice versa). This is not really important for what you plan to do, bottom line, soft stepping a regular shaft for your son will produce a slightly more flexible shaft the produces higher ball flight. Because the shaft will be a bit shorter, the club head will feel lighter (think about swinging a ball and chain, the longer the chain, the heavier the ball will feel) Hope this helps...

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


I am 15 and have been using mens clubs for awhile, but i am also 6 1. My brother is 13 and only about 5 4 and he uses the x 20s. they are a little long, but he hits them well and will grow into them nicely. Your son could always just choke up on the club a little for now.

Bag: Callaway Org 14 Extreme Cart Bag
Driver: Taylormade R9 460 10.5
Woods: Nike SQ 3 Wood
Hybrids: Walter Hagen AWS 3 Hybrid
Irons: Callaway Diablo Edge 4-AWWedges:Wedges: Cleveland CG12 56 and 60Putter: Nike Method 001:Ball: Bridgestone Tour B33-RX and Nike One Vapor

Link to comment
Share on other sites


I am 15 and have been using mens clubs for awhile, but i am also 6 1. My brother is 13 and only about 5 4 and he uses the x 20s. they are a little long, but he hits them well and will grow into them nicely. Your son could always just choke up on the club a little for now.

4'11" is too short for standard clubs...even choking down.

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


BTW...when I said cut down 1/2 inch, this was just a general guidline, attached is a chart that can help you measure your son. You can allow some length for him to grow into, but he will need to choke up a little...no more than an inch.

http://www.golfspyder.com/golf-club-length.html

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star

Link to comment
Share on other sites


I just came across two Nike sets that seem to be aimed at teens:

Nike Ignite Junior

Nike Slingshot 4D Junior

Any thoughts on these?

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003

Link to comment
Share on other sites


Note: This thread is 4915 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Did LIV pros cross ‘etiquette’ line at Masters? 3-time major winner has thought Did LIV Golf pros cross an “etiquette” line last month at the Masters? Three-time major winner Padraig Harrington has a thought. I do not mind cursing. I rather see some emotion on the course and honest reactions to bad shots or what not. I didn't catch it being a TON of cursing in this Masters. It was not noticeable. 
    • I had to think about this topic for a while. I don't tend to remember specific details about my putts, but a few do stand out in my mind so I guess they're worth noting. I don't know that I'd call them my favorite but it's close enough. #18 at Spooky Brook Might be the hardest 4' putt I've ever had. Pin was back right and I hit my third shot just to the right of it. The green slopes fairly severely back to front. I read the green but I knew the putt anyway as I've seen it before. I told the guys I was playing with that the putt was it was going to break almost 3' and if it doesn't go in I'd have a longer coming back up for par than I was looking at. It went in. #12 at Quail Brook I'm not even sure how to describe this green properly. It's not quite a two-tiered green, but the back and front are separated by a ridge that goes across the middle of it, with the green sloping harder off the front than the back. You can generally putt from the front to a back hole location but good luck keeping the ball on the green if you putt from back to front. On this particular day, I was looking at the latter. I had to putt up into the apron due to how the ball was going to break and that helped slow the ball down enough to hit the hole at the perfect speed. One of the rare birdies I've seen on that hole. #2 at Hyatt Hills Short par 5. This makes the list because it's the first eagle putt I've ever made, which funny enough happened the day after the first eagle I've ever made. I've made two eagles in all my life and they came on back to back days. I wasn't even planning on playing golf - it was a Monday - but I was doing some work at the place I used to work at when I was younger and catching up with some of the guys I've known for years. They were going out to play in the afternoon and had a spot available. I used to see these guys every day for years but we've never played together, so I said I'm in. I hit a really good approach shot into slope that separated the two tiers on the green and spun the ball closer to the hole. Had roughly 8' left to the hole, a downhill right to left breaker. One of the guys said, "You've got to make this, I've never seen an eagle before," and I said, "I've never made an eagle putt before." And then I made it. #17 at Stoneleigh @GolfLug's post reminded me of my own heroics on #17 a couple of years ago. The hole was back left, in the bottom tier. I hit my approach short of the green and flubbed my chip so it stayed on the top tier. I read how the putt was going to break after the ramp (is that what you call it?), then read my putt up to that point. It needed to basically die at that point because if it hit the slope with any kind of speed, it would long past the hole and possibly off the green. I hit the putt perfectly and holed the 40-footer center cup. #6 at Meadow at Neshanic Valley, #15 in the Round This was during the stroke play qualifier of my tournament. It might be a little bit of recency bias and I hit some really good long putts in the four rounds I played, but this 7-footer was my favorite putt of the entire tournament. The hole was cut on the top of a ridge. I hit my tee shot short right but hit a pretty good chip just long and below the hole. Play had backed up at this point, with the ladies waiting on the tee while we were finishing up. I hit the putt just a hair on the high side and it curled around the hole, fell back a couple of inches and stopped on lip. We all looked at it incredulously, "How does that not fall in?" Before I took my first step towards the hole, the ball must have thought the same thing and decided to drop.
    • I don't remember a ton of putts, but I've thought about this a bit and came up with 2 good ones. #5 at Mid-South: 2017 Newport Cup I remember the putt pretty well, but the surrounding details are a little hazy. I believe this was in my singles match against @cipher, and it was a hole he was stroking on. I had hit a mediocre approach to the front of the green and had what must have been a 50 foot putt to a back pin. If I remember correctly, @cipher was pretty close for an easy par at worst. I had @mvmac help me out with a read, which ended up being a great read by him. Hit the putt and jarred it for birdie. It was perfect speed, too, would have been an easy 2 putt if it hadn't gone in. I think we ended up tying for the hole. But I rarely make putts that long, and doing it to steal half a hole was really nice. #3 Fox Hollow (Links): 2023 Match Play This was on the third extra hole of a scratch match against a legitimate 0 handicapper. We had tied after 18 holes and traded pars on the first two extra holes. On the third extra hole, he had about 30 feet for birdie; I had about 25. We were on pretty much the exact same line. He missed his putt just on the low side, and I conceded the par. I felt good over this putt - I knew the break well and just needed good speed. I hit a great (not perfect) putt, and BAM, back of the cup for the victory on the 21st hole. I will say that the speed wasn't great, as it would have been a few feet past if it didn't hit the cup. But I wanted to give the ball a chance and take a bit of break out of it. I went on to win the match play tournament, which is my only tournament victory in a scratch event.
    • there will be lots of changes.  i mean, look at newey past, each team fell off a cliff when he moved on i think max is the magic bullet   if red bull loses him then whee are they going for drivers?   lots of young talent but he is a proven winner and i’m sure top engineers love to work with him  
    • I too, like @GolfLug, remember great wedge, iron shots, or my missed putts, more than my made putts. My most memorable recently, would be: #17 Old Course St. Andrews (last year) I had been putting awful all day (I started 3 putt, 4 putt, 3 putt, 3 putt), but found a putting stroke on the back 9 and was 1 under on the back going into 16 and of course I 3-putted it for a bogey. Got to 17 and my playing partner just hit it into the hotel, so I went a little more left and decided to not try and hit it over the hotel.  And as soon as my ball was in the air, I heard one of the other caddies do the chicken noise.  LOL My shot was a little more left than I wanted, about 185 yards, I hit a 6-iron and it was drawing right at the flag.  The pin was just to the right of he bunker and towards the front of the green. My ball hit short (and just missed going into said bunker) and stopped about 15 feet left of the hole. Had a little left to right break and as soon as I hit it, I knew it was in.  Birdie on the road hole, looked at the caddie and said not bad for a Chicken.  Parred 18 (missed 10 foot birdie putt) for a 35 on the back 9 at the Old Course. #18 Springfield G&CC Last year while playing in our season long match play event, my partner and I get the 18th hole needing to win the match to move on into the knockout round.  We are tied going into 18.  A tie and we lose on overall points by .5.  Our teaching pro is on the other team (very good golfer), so we were pretty sure we needed a birdie to have a chance to win the match, I hit on of the best drives I hit all day and had about 135 yards to the pin, but it was in a place where you didn't really want to be long.  So I hit a PW and it landed just short of the flag but released about 12 feet past the hole, so have a devilish putt coming back down the hill.  Our competitors were away and the pro missed his birdie putt by inches, I thought it was in when he hit it.  So after reading the putt, which probably had a 2 cup left to right break, I made the putt to win the match.   #15 Springfield G&CC A few years back, was playing in the first round of the Club Championship (against the previous years runner-up) and my putter was balky all day.  Got to the 15 hole, 2nd Par 5 on back, and was 3-down with 4 to play.  We both hit good drives, both hit good second shots and we both hit decent 3rd shots.  I was about 15 feet and he was just a hair longer.  He missed his putt, I had another slider putt down the hill, with about a foot of right to left break and made the putt.  I birded the next hole, to go 1 down, but not a memorable putt as I only needed a bogey to beat him on that hole, he had all kinds of issues going on.  Lost on 17, as he birdied it, right after I missed mine to lose 2&1.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...