Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5930 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
As you can see in my bag i have Vokey 52* CG10 56* and 588 60*

I love the feel of my new vokey 52*....i notice i kill(cut up) pro v's with my cg10 way too much but i am deadly with my 588 lob wedge around the green. Im thinking of replacing my 588 and cg10 with vokeys 56* and 60*.....comments welcome

Superlight Stand Bag
909D2 9.5° Diamana S
909F2 15.5° Diamana S
909F2 18.5° Diamana S
AP2 Project X 5.5 3-PW Vokey Spin Milled 52° 56° 60° Studio Select Newport 2 Pro V1Home Course - http://www.huronoaks.com (Home of Mike Weir)


Posted
If you are deadly with the 588, why would you replace it? I wouldn't change it until you notice that you would benefit from better grooves. Also, if your complaint about the cg10s cutting up the balls then the vokeys won't be better. Spin milled wedges have a reputation for cutting up balls. But overall, I would say keep the 588 and switch the vokey if you think the feel of it is significantly better then the cg10.
In the blue and tan grom Bag:

Driver r7 460 10.5*
Fairway Woods '07 Burner 15* and 18*
Irons 4-PW r7 XDWedges 47*, 52*, 58* CG14,Putter TiffanyBall One Tour D

Posted
well the 588's getting old, worn out grooves etc, i found the vokey didnt cut up my pro v1 today compared to what my cg10 does to the ball...maybe ill just ditch the cg10, get a matching vokey but 56*....then decide what to do lobwedge wise...

Superlight Stand Bag
909D2 9.5° Diamana S
909F2 15.5° Diamana S
909F2 18.5° Diamana S
AP2 Project X 5.5 3-PW Vokey Spin Milled 52° 56° 60° Studio Select Newport 2 Pro V1Home Course - http://www.huronoaks.com (Home of Mike Weir)


Posted
Well I love my 60* vokey.

I'm thinking of adding in a 54* wedge too.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
not a TM iron fan or wedge...having them in my woods is good enough lol

Superlight Stand Bag
909D2 9.5° Diamana S
909F2 15.5° Diamana S
909F2 18.5° Diamana S
AP2 Project X 5.5 3-PW Vokey Spin Milled 52° 56° 60° Studio Select Newport 2 Pro V1Home Course - http://www.huronoaks.com (Home of Mike Weir)


Posted
As you can see in my bag i have Vokey 52* CG10 56* and 588 60*

If you dont want to cut your balls up, you are going to need to either switch to less spinny wedges or go with a harder ball.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted
i found the vokey doesnt cut up my pro v's, gonna ditch the cg10

Superlight Stand Bag
909D2 9.5° Diamana S
909F2 15.5° Diamana S
909F2 18.5° Diamana S
AP2 Project X 5.5 3-PW Vokey Spin Milled 52° 56° 60° Studio Select Newport 2 Pro V1Home Course - http://www.huronoaks.com (Home of Mike Weir)


Posted
It all depends. If you like the feel, stick with the wedge. I use the CG12 wedges with the DSG (52 and 56) and love them.

Current Gear Setup: Driver: TM R9 460, 9.5, Stiff - 3W: TM R9, 15, stiff - Hybrid: Adams Idea Pro Black, 18, stiff - Irons: Callaway X Forged 09, 3-PW, PX 5.5 - SW: Callaway X Series Jaws, 54.14 - LW: Callaway X Series Jaws, 60.12 - Putter: PING Redwood Anser, 33in.


Posted
I played Clevelands (588 and CG11) for the fast few years. I switched to Vokey at the beginning of the year and I absolutely love my decision!

In my Grom stand bag:

V2 Rapture 9* with Mitsubishi Rayon Diamana Blue stiff shaft
Launcher 15* 3 wood with Proforce V2 stiff shaft
18.5* 3DX 3+ Hybrid with Adila NV Hybrid 75 stiff shaft MX 200 3-PW with True Temper XP S300 stiff shaftsVokey Spin Milled 52.08Vokey Spin Milled 58.12 CX2 34 in


Note: This thread is 5930 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.