Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5740 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I am thinking about buying the new ft tour driver. I have only hit it in a simulator at Golf Galaxy and seem to hit a pretty 300 yard draw. But what do you guys think of it? How forgiving is it? What about the two shafts that come with it, voodoo vs xcon 6? The one I tried was an 8.5 stiff voodoo and felt amazing, I am thinking I'd get a 9.5 degree though.

Ft- Tour 9.5* Proforce V2 77x 44.5"
585h 19* Aldila VS Proto 80 Stff
3-pw Dynamic Gold x100
MP-T10 52* 56*
X-tour 60* Antigua 33"


Posted
How do you hit your FT-iQ in that simulator? Seriously, hit them side by side. According to the GG simulator, I can hit my FT Tour 360 w/a slight baby draw! Ironically enough, I play a baby fade off the tee and don't hit it nearly that far (especially not every time, 10-20 times in a row).

Forgiveness is subjective. I have no issues with forgiveness w/my FT Tour. My miss is either slightly high on the club face or just a touch toward the heel though. I seldom, if ever, miss way towards the heel or toe.

I haven't tried it with the Xcon6 but I have hit it with the VooDoo. For me the VooDoo had way to much spin and launched to the moon. I ended up going w/a Diamana WB in both of mine, one at 44.25", the other at 44.5", both at D3. Again, the shaft is going to depend on a ton of variables and what works for me likely won't work for you. The only way to know for sure is to hit them and see what you like. As for quality though, both the Xcon6 and VooDoo are quality shafts.

Good luck!

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted
How do you hit your FT-iQ in that simulator?

I hit it about 280 with a slight fade. Real life is more like a slight draw yardage varying from 270 to 310. I tend to hit it high on the club too, how does it react when there is a mishit? I like the Diamana WB alot, but I thought the point of the FT tour is designed to launch high? Wouldn't the whiteboard make the trajectory too low for the head?

Ft- Tour 9.5* Proforce V2 77x 44.5"
585h 19* Aldila VS Proto 80 Stff
3-pw Dynamic Gold x100
MP-T10 52* 56*
X-tour 60* Antigua 33"


Posted
I hit it about 280 with a slight fade. Real life is more like a slight draw yardage varying from 270 to 310. I tend to hit it high on the club too, how does it react when there is a mishit? I like the Diamana WB alot, but I thought the point of the FT tour is designed to launch high? Wouldn't the whiteboard make the trajectory too low for the head?

The FT Tour is a low launch/low spin head. Teamed w/the Diamana WB, it's a low launching knuckle-baller. For many, this combo launches to low. I have my WB's tipped roughly 1/4" so they play on the extreme edge of S flex, or a soft XS. My SS is 116-118 and this flex has proven to offer a pretty good balance between distance and accuracy with ideal launch conditions for me. I've let quite a few other people hit it and most of them really low bullets that fly about 150 and roll another 40 or so yards. You need a pretty good SS and angle of attack to hit this driver with a WB. Don't get me wrong, it's not that difficult, it's just not something that an AVERAGE golfer can do (I hope that doesn't sound conceded). Truth of the matter is though, the FT Tour was not designed with Joe Average in mind.

When I miss high on the club face ball flight tends to be a bit higher (due to a higher initial launch) with less spin. If I miss high when trying to hit a draw or fade, ballflight is usually straighter than intended. Additionally, the ball doesn't travel as far. For example, I missed one pretty high tonight (only about 3/8" below the crown) and the ball traveled a good 20 yards shorter than usual and went dead straight (I was attempting to play my stock 5yd fade). As always, YMMV. For what it's worth, I love this head. Teamed with the right shaft, I believe that it's one of the best drivers that you can buy right now.

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted
I love my FT Tour. I switched from the FT-9 which I also hit quite well. You ask about forgiveness, and this is where I think the FT Tour has the leg up. I feel as though I am not losing as much distance if I hit the Tour off center. I was not a fan of the voodoo I had at first so switched out to the VSProto. For some reason though the voodoo works quite nice in my 3wood?

Callaway RazrFit Extreme 9.5 w/Project X 6.5
Callaway XHot Pro 15* 3Wood w/Project X 6.5
Callaway XTour 18* 2h w/S300
Callaway XHot Pro 4/5 irons w/S300
Callaway XForged III 5-PW irons w/S300
Callaway Forged 52*/58* Wedges
Odyssey 7 Versa 90
Callaway Hex Black Tour


Posted
I feel as though I am not losing as much distance if I hit the Tour off center.

Does it go straight or hooks or slice on those off center hits? I understand tow is hook heel is a pull slice but is it more dramatic than the Ft-9?

My swing speed is about 105-110 and am pretty confused with my launch and how it should be. I used to have a Sumo 5000 before my Ft-iQ tour and I thought I launched that too high. Now that I have my Ft-iQ with the WB I am hearing that higher trajectory is better. http://findarticles.com/p/articles/m.../ai_109467575/ What's your word on this? If I decide to get the FT- tour (which is looking likely) should I stick with the Matrix Xcon 6 or switch it out for a lower launch shaft? Thanks for all of the good info btw!

Ft- Tour 9.5* Proforce V2 77x 44.5"
585h 19* Aldila VS Proto 80 Stff
3-pw Dynamic Gold x100
MP-T10 52* 56*
X-tour 60* Antigua 33"


Posted
higher trajectory isn't necessarily BETTER. a higher trajectory with good carry can be good but if you have a ton of back spin (which id oubt you have with WB) then your losing a bit of distance off your drive.

however, ball trajectory is more or less personal choice. Look at guys like Dustin Johnson, he launches it a mile in the sky, thus he's able to get quite a bit of distance but not a lot of roll. Take Mickelson for example who doesn't launch it up as high but his drives get a ton of roll.

So really, its a choice you have to make.

As for the FT Tour, I love the smaller head. Lets you have a bit more control over your shots. My mishits aren't necessarily slices or hooks but I've had problems pushing my drives a bit but that could be because of the shaft being X. I swing roughly 115-118 and I'm still getting adjusted to a X shaft but for the most part, I've adjusted fairly quickly and easily.

I will give you one last point...if you like the FT Tour and if you are possibly looking to save a couple bucks, the Cleveland DST Tour plays fairly similar to the FT Tour and its roughly $200 cheaper.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco


Posted
FWIW, I would only trust launch, spin and speed on the simulators. Every time I hit on a simulator, it tells me I hit nothing but a straight push, yet on the course, I hit a straight fade or a pull fade.

R9 SuperTri 10.5*
Exotics XCG-3 4W 16.5*
Idea Pro 18* and/or 20*
i15
X-Tour 54/60PM Trinidad TP Black LDPAll in a SCB and MicroCart


Posted
FWIW, I would only trust launch, spin and speed on the simulators. Every time I hit on a simulator, it tells me I hit nothing but a straight push, yet on the course, I hit a straight fade or a pull fade.

yeah i woldn't pay attention to that part. the guy at GG told me that the shape of your shots are inaccuracte because it can vary heavily depending where you're standing relative to where the machien thing is, etc.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco


Note: This thread is 5740 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Hello Golfing Buddies, It has been awhile since I posted but I am the Retired Old Man that asked for advice because I suffered two "T.I.A.'s about switching from playing right handed to playing left handed.  I purchased a Callaway Edge Left handed golf clubs. I changed the grips to oversize grips.  Well, two weeks ago and still at 79 years old, I shot a 44 and 47 on a small course in my hometown.  I am currently changing my shafts from regular flex to Senior flex.  So, you can see' it can be done! So, you other old timers; get with the program! Blessings to all of you. Retired Old Man (Terry Warner)  
    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.