Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5647 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
If you count the clubs in my signature, ive only got 12 and I could probably do without the 3 wood as I seldom hit it, so my full set could consist of 11 clubs. The 56 deg sand wedge gets primarily used just for that, the sand. But i use most of the rest of the clubs at least once per round. The 9 iron seems to get neglected a lot as sometimes ill hit an easy 8 iron because I would rather hit the 8. Other than the putter, the PW is probably the most used club as it gets the lions share of chipping and pitch shots. The 6 iron seldom gets used for full shots, its many times the punch-it-under-the-tree-onto-the-green club or the whack-it-back-out-into-the-fairway club when im wild off the tee with my driver. The 5 hybrid gets used a lot too on approach shots and par 3's, anything from about 150-170 yards.

Driver-Taylormade Burner Ti 420 cc 10.5 deg reg flex
3 wood-orlimar rcx 14 deg
Hybrids-warrior golf 20 deg, 23 deg and 26 deg
6-pw-AFFINITY / ORLIMAR HT2 irons steel shafts, reg flex, 56 deg tour series wedge
Putter-Rife 2 Bar Hybrid Mallet...


Posted
You can hit any iron out of a bunker, dude...and hit it pretty well with practice. Not something I'd recommend without practicing first, though. You don't ever hit bunker shots with anything besides a sand iron?

I love the long running pitch out of a bunker with a 9-iron. I started the game (for real - I'd played pasture golf at home for a summer with my brother and a used set of Spalding Tru Flites) with a guy who used Powerbilt Citation blades and his highest lofted iron was a 9. He was like Seve with that thing. My brother still doesn't use a sand wedge and I've never seen him blade a ball over the green OR leave one in the sand - and here I am with 3 specialized wedges thinking I know how to golf.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted
You can hit any iron out of a bunker, dude...and hit it pretty well with practice. Not something I'd recommend without practicing first, though. You don't ever hit bunker shots with anything besides a sand iron?

Greenside bunker I almost always use a sand wedge unless the pin is on the other side of a large green. Can't imagine playing with only those 3 clubs and being able to record a "good score" relative to your usual.

« Keith »


Posted
Greenside bunker I almost always use a sand wedge unless the pin is on the other side of a large green. Can't imagine playing with only those 3 clubs and being able to record a "good score" relative to your usual.

Not saying you'll ever play a 3-club round, but I'd suggest 3 different clubs.

In your case, maybe 4-wood, SW, and putter. If you can you putt with a bladed wedge, add a mid-iron instead of the putter. Also, with no wedge, course management comes into play more. Don't fire at that those sucker pins. Play for a runup shot between the bunkers or layup for a comfortable full shot to the middle of the green. Don't hit into pot bunkers or short side yourself - good advice even with a full set.

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted
Also, with no wedge, course management comes into play more. Don't hit into pot bunkers or short side yourself - good advice even with a full set.

DING DING DING, d golf pro i am takin lesson from told me when he played in high school that why his coach would make them play a 3 club round every so often, so that they would have better course management, and it also allowed them to work on certain shots, in actual oncourse situation


Posted
Not saying you'll ever play a 3-club round, but I'd suggest 3 different clubs.

Probably how I'd play a 3 club round... 3w, 7i, 56... possibly would put in my 3h instead of the 3w...

Tristan Hilton

My Equipment: 
Titleist TSR2 Driver (Fujikura Pro 2.0 TS; 10.5°) · PXG 0211 FWs (Diamana S+ 60; 15° and 21°) · PXG 0211 Hybrid (MMT 80; 22°) · Edel SMS Irons (SteelFiber i95; 5-GW) · Edel SMS Pro Wedges (SteelFiber i110; 56°, 60°) · Edel Classic Blade Putter (32") · Maxfli Tour Ball · Pinned Prism Rangefinder · SuperStroke Grips · Flightscope Mevo · TRUE Linkswear Shoes · Vessel Player V Pro 

Awards, Achievements, and Accolades

Posted
I like the idea of using only X amount of clubs for a round and just force myself to make different shots. I have tried this before for fun but with my full set. Sometimes if I was playing well I would talk myself out of hitting the "practice" shot that I normally wouldnt play. Doing this forces you to play that shot though so Im going to have to try it.

Posted
Not saying you'll ever play a 3-club round, but I'd suggest 3 different clubs.

Yeah we actually do play limited club matches from time to time. Usually when we go out the back for free. Everyone either blades a wedge or uses the 3 wood or hybrid to putt. We play aggressive since par usually wins the hole. Even had a friend hole out for eagle in a 3 club match. Just think that wedge is required when a "good score" is what you are seeking.

« Keith »


Posted
Yesterday I made a birdie at a short Par 5 (495 yds.) during a 3+ tournament (3 clubs + putter), at this hole I had a really good drive and a 5 iron ..... 7 ft. from the hole, just missed the eagle ...... My yesterday's set: Driver/5i/9i+Putter and had a nett 76 (only 4 above my hc)...... I wonder why on earth we need 14 clubs .... shooting 82 with only 3 clubs .....

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Note: This thread is 5647 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.