Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5443 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Folks,

Trying to solicit some advice here....how often do you guys normally get new wedges?  I last bought wedges back in the summer of 09, but during the summer months, I'll play or hit balls 3 times a week or more.  So my questions are:

1) Is every 2 years a good time to re-up on wedges

2) Should I get them all at the same time

I'm pretty partial to Vokey's so that probably won't change, but I appreciate any responses.


Posted

I've had the same sand wedge for 4 years now, and the same pitching wedge for 3.  The sand wedge is looking pretty rough now, but the pitching wedge still looks in decent condition (and I hit more balls with two clubs than anything else in my bag).

Unless you really do put a lot of mileage on your clubs, I'd imagine they are still in decent condition.

P.S. Are you worried that new, off-the-rack wedges this year are all supposed to conform to the new groove rule?


Posted

I don't really worry about it.  If I like a club it will stay in my bag for a long time.  I'm quite happy with my current setup (Vokey 54 and CG15 56), and I don't really plan on changing this season at all.  The only reason I might buy a new wedge is if I do well on club tournament and get some book money on the pro shop... I'm always willing  experiment as long as it doesn't come out of my own pocket.

Originally Posted by Gordon McTavish

P.S. Are you worried that new, off-the-rack wedges this year are all supposed to conform to the new groove rule?



No I'm not.  Makes absolutely no difference in my game.  On full shots I can stop the ball with no problems, and on short shots (chips and pitches) I prefer to let the ball run to the hole, and to try and control the runout with trajectory rather than with spin.  My irons down to my GW are all new grooves now - have been for 2 years.

By the way, it doesn't matter if they are off the rack or not, they still have to have the new grooves to be conforming.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

Posted

I just bought a new SGS 56* this week.  It's the first new wedge I've ever bought.  I've been using an old Titliest forged that is probably about 30 years old....


Posted

As a follow-up, anyone use a groove tool on their wedges?

I have a set of Vokeys on their 3rd season, and the shafts match my irons (PX 6.5).  The 60 and 56 are getting a bit worn and I've thought of picking up a groove tool on ebay to breath some life into the set.

Any experience out there?

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted

If you're noticing a decrease in spin, or that you're catching fliers you normally wouldn't...I'd change wedges. There's no set time period, it's more about rate of play, impact dispersion and all of that...the things that directly impact the clubface and cause wear. Wedges aren't pieces of fruit. They don't go bad in a set period of time.

Current Gear Setup: Driver: TM R9 460, 9.5, Stiff - 3W: TM R9, 15, stiff - Hybrid: Adams Idea Pro Black, 18, stiff - Irons: Callaway X Forged 09, 3-PW, PX 5.5 - SW: Callaway X Series Jaws, 54.14 - LW: Callaway X Series Jaws, 60.12 - Putter: PING Redwood Anser, 33in.


Posted


Originally Posted by Gordon McTavish

P.S. Are you worried that new, off-the-rack wedges this year are all supposed to conform to the new groove rule?


I talked with a guy in Golfsmith who advised that the majority of wedges that are on the racks are still non-conforming.....you almost have to ask specifically for a conforming wedge.  I'll probably replace my 54 b/c it does have considerably more wear than my 50.


Note: This thread is 5443 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Mike Mentzer Was Right: The Science, Logic, and Legacy of Heavy Duty Training - Mike Mentzer Modern science backs Mike Mentzer’s one-set-to-failure training. Discover why Heavy Duty works, and how logic, intensity, and recovery lead to real results. Is this what you mean? If so, I have known bodybuilders to do this and they were very strong.
    • Wordle 1,652 3/6* ⬛⬛🟦⬛🟦 ⬛🟧🟧⬛⬛ 🟧🟧🟧🟧🟧
    • Wordle 1,652 X/6* 🟨⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟩🟩🟩 ⬜🟩🟩🟩🟩 ⬜🟩🟩🟩🟩 Yup - one of those Wordle moments….
    • The term I hear most often is "double teeing" which means the course/club has starting times from both the #1 and #10 tee.  I have encountered this many times and we know if we are the first group off #10, we may well get to #1 and have to wait because there are groups still with tee times yet to tee of #1.  In most instances, where the course/club has a starter, he normally explains this situation.  In this case, the pro advised what you would could/would encounter making the turn to #1.  And, that is exactly what happened.  Probably would have been wise to talk to the pro after playing back 9 and ask when you could go off #1 since apparently that club does not double tee.   Regardless, the outburst towards the other group was uncalled for.  And, I don't blame the member for being upset.  As a member of a private club, you are responsible for the actions of your guest.  I have played many times as a guest in the UK and I am pretty damn sure my host was responsible for my actions while at the club.  I know at the clubs I have belonged to here in the US, that is the way it is.  As a matter of fact, the member may find himself being brought before management and facing possible suspension.  So, I don't blame him for being upset.  However, as the host, he really should have stepped up and put a stop to the OP's actions.  OP makes this statement "I now understand that standards are different on the "private course." But I'll take those lessons to the muni, too."  No, the standards are not different.  You, sir, seem to be just a bit hard headed and belligerent, even if you are college professor...which possibly explains a lot.   JMHO
    • Day 32: worked for about 10 minutes on my drill. Filmed it as well for a check in. I think it’s slightly better but still seeing some issues. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.