Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5509 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hi I recently bought a Scotty Cameron putter that I would like to know about because I can not find it on their website archives. Its a Coronado Two and it has "The Art Of Putting" on the bottom, it also looks like a oil can finish but the shaft sticker says " to protect gun blue finish use baby oil and soft cloth to retain finish", I know it is not gun blue unless it wore away to the metal. I don't know anything about this putter, so any help will be great thank-you.


Posted
Is this what you have??? http://cgi.ebay.com/Mint-Titleist-Cameron-Coronado-Two-Oil-Can-Classic-34in-/120714951360?_trksid=p4340.m263&_trkparms=algo%3DSIC%26its%3DI%252BC%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D10%26pmod%3D190498539846%26ps%3D63%26clkid%3D9011473640186283115 http://www.scottycameron.com/putters/archivedetail.aspx?id=77&modelID;=121&seasonID;=11

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted


I have an original studio design 1 that has the same finish. Just make sure you keep it dry, if it gets wet, get the water off a.s.a.p. I was fortunate enough for my boss to have the oil cloth that came with the original studio designs, and I basically would wrap the putter head in the cloth between rounds and especially in the winter. Don't leave the putter out in the cold or it will rust. I also used baby oil on it, and it worked as well as the cloth that came with the putter.

it's a sick looking short stick. hope you enjoy those birdies!

Originally Posted by explorer99sport

Yes that is the exact putter. Is there anything special about it or was a common putter, and do you have the year of it? Thank-you



titleist.gif 910 D2 10.5 -- Diamana A'hina X
titleist.gif 909 F3 15.0 --  Matrix Ozik X-Con
titleist.gif 910 CB 4-PW -- Project X 6.0
cleveland.gif CG10 52, 56, 60.
cameron.gif   Studio Design 1.0   titleist.gif Pro V1    c2_beer.gif It's a Wisconsin thing.

Posted

Yes that is the exact putter. Is there anything special about it or was a common putter, and do you have the year of it? Thank-you

I found it in the archives under 1998. Chances are that it was produced over a longer period than just that though. I'm a little out of my element w/the Coronado, I'm more of a Newport guy. Enjoy the putter and as BDM said, be sure to take care of it...

Yonex Ezone Type 380 | Tour Edge Exotics CB Pro | Miura 1957 Irons | Yururi Wedges | Scotty Cameron Super Rat | TaylorMade Penta


Posted

Coronado TWO putters were made in 1998 and 1999.  Oil Can finish.  Are you sure you have a Coronado TWO?  The easiest difference to spot between the Coronado and the Coronado Two is the neck.  The TWO has a square-ed off neck.  The Coronado has a more traditional round neck (round like the shaft - the hosel/neck shape flows nicely).

Your putter, with the Gun Blue finish label, is interesting.  Maybe aftermarket work?  Is the label clear, with black lettering, surrounded by a red rectangle?  That is the traditional Cameron Gun Blue sticker from that era, but I don't think it would be on an Oil Can putter.  The Oil Can finishes are pretty distinctive.  Rainbow swirls when new, the develop a deep brown patina as they age, almost like a dark brown leather.

My putter is also an old Gun Blue putter - and I don't store an oil cloth with it at all.  The finish looks great for as old as it is.  (2001).  Never baby oiled it either.  A wipe down with the oil cloth after each round (or soon after) and into the headcover she goes.  I also store it inside the house in the winter.  I really like the Coronados... almost bought one of them when I bought my Studio Design 2.

 :macgregor: V Foil 8.5*    :tmade: Mid Rescue 16*  -- :wilsonstaff: RM  2 thru Wedge -- :vokey: 56/10  -- :scotty_cameron: Studio Design 2  & a  :srixon: Z Star 


Posted

I am pretty sure its an oil can finish, its has a rusty brown look to it ever since i got it. I dont know what the previous owner did to it, but it does say coronado two with a crown above it on the heel/face of the putter. I looked on the Scotty Cameron archives and my putter has Titleist on the heel end on the back of the putter. I can post pictures if its easier. And it does have the red rectangle sticker that say gun blue finish, so i guess it wore completly off?


Posted



Originally Posted by explorer99sport

I am pretty sure its an oil can finish, its has a rusty brown look to it ever since i got it. I dont know what the previous owner did to it, but it does say coronado two with a crown above it on the heel/face of the putter. I looked on the Scotty Cameron archives and my putter has Titleist on the heel end on the back of the putter. I can post pictures if its easier. And it does have the red rectangle sticker that say gun blue finish, so i guess it wore completly off?



It is possible for the finish to come off. My studio design #1 was forced into storage for several months, upon removing the headcover the next season it had rusted and pitted badly.Birchwood casey makes a product to help remove rust that wont hurt the finish. Once you are done use gun oil or the Cameron oil cloth to wipe it down. If you dont oil it the thing will begin to rust pretty quickly.


Posted

If you'd like I can email you pics of before and after. I just cleaned up my original art of putting Laguna today. The rust wasnt too bad, but the product took it off without affecting the finish. Unfortunately it says Im not allowed to upload images? Guess Im too new :(


Note: This thread is 5509 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 37, June 10.  Today was primarily WFH, so I had several practice sessions (indoors, off a mat, into the net).  At least one each of U, 9, and 6-iron full swings with the usual priority.   I also tried a few times a putting type stroke with my 4H, as something I should probably learn how to hit (and what it does), but the mechanical shot at home off a mat doesn't tell me much of what it's doing.  That's something I should probably try on a real green, not during a round until I've tried it.
    • Day 10 (10 Jun 26) - Played in the midweek shootout at my home course - on aerated and sanded greens - day of trying to figure tempo to get the best roll on the greens.  Approach game was decently solid as was shots off the tee.  
    • Ok, I'm trying to find a feel to hit a consistent ball flight (irons).  My current predicament.  1. I try to do the arms down stuff better, with the club feeling like it is way behind me more. It's just a cluster of results. Most of the time, I can't get any speed on the swing. If I get my arms down faster, I just throw them out.  2. I focus all my attention on turning better. Pushing off with my left leg and getting my right side through better. On the DTL view, this doesn't produce anywhere close where the hands and club should be. The result is usually ball first contact, lower ball flight, more centered contact.  At this point, I am going with option 2. Stop thinking about what the hands do. Just make a shorter backswing, keep it wide, turn through. Somehow, the club head finds the ball. My focus is so much on just making sure I turn, it's like, "Oh, that contact was better.... Oh, that bell flight looks playable." If not, I will just be practicing my entire summer.       
    • Nope, they spent too much money. They are in over 28 million on the football roster and related NIL compensation at this point. Boosters associated with any Texas college football team has HUGE sway. The AD is between a rock and a hard place. They put a lot of money into Sorsby, at the chance of winning a NC this year. If you move on, you basically wasted a lot.  This is why Ohio State wants 3 QB's they feel can start. That is why the backups the past 5 years at some point transfer. Texas Tech has no backup near the quality of Sorsby. If they move on, they are screwed for 2026. 
    • Maybe there's something I still don't understand about the situation. Wouldn't Texas Tech do itself a favor to move on from Sorsby at this point?      
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.