Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5403 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

does anyone know when the 2012 titleist drivers will be out or if there even coming out with one? if they are has anyone seen pictures?

|callaway.gif X460 Tour Fujikura Tour Platform 26.3 73g | taylormade.gif 2i Rescue 11 |  3i HiBore Hybrid |  710 MB |  Wedge Works 48/06 |  cg12 52/08  | vokey.gifSpin Milled 56/11 | nike.gifSV Tour 60/10 | cameron.gif Studio Select Newport 2 34" |

 

rangefinder : LR550


Posted

As I understand it Titleist drivers are on a two year cycle.  The 910 series didn't come out until November 2010 so anything new probably won't be out until November 2012.

:tmade: SLDR 12* :ping: G20 4W :adams: Speedline Super S 4H :mizuno: JPX-825 Pro 4-G :tmade: ATV 56* & 60* :cameron: 2014 Select Newport or 1997 Teryllium 3 Newport


Posted

910 was released late 2010, so colnago is right. Look more forward to late 2012 for release date and spy pics to show up prior to that


Posted

ok thanks, i was just wondering if i should buy it now or wait

|callaway.gif X460 Tour Fujikura Tour Platform 26.3 73g | taylormade.gif 2i Rescue 11 |  3i HiBore Hybrid |  710 MB |  Wedge Works 48/06 |  cg12 52/08  | vokey.gifSpin Milled 56/11 | nike.gifSV Tour 60/10 | cameron.gif Studio Select Newport 2 34" |

 

rangefinder : LR550


Posted

but doesn't it seem a bit early in general about that? i really like where their drivers are at right now, and in most cases i think they're neck and neck with taylormade woods. Understated.

the 910 of recently seems to be there best driver yet. looks good plus all the weight and hosel adjustability.  wish i had the cash to drop on it and replace my r9 460.

ST-230 Max 9.5*, Hzrdus Smoke Blue RDX 6.0

ST-G 5-Wood 17*, Kai'Li Blue 70g Stiff

Adams Tight Lies II 19*, KBS Tour Graphite Prototype 85g Stiff

Wilson Staff D9 Forged 5i, DG105 VSS Pro Stiff (stock replacement for 4i)

Wilson Staff FG Tour (2009) PW-5i, DG S300 +1"/2*Up, 6.0 Freq

Mizuno S23, 52* and 56*, KBS Hi-Rev 2.0 115g

Callaway Mac Daddy PM Grind 60*, KBS Tour-V

TaylorMade Ardmore 3 TP Patina (left-handed)

 


Note: This thread is 5403 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
    • Day 56 (4 May 26) - Worked on some ball-then-ground drills - going from P3 thru impact - with a slowed tempo, working to keep all parts in sync.   
    • Wordle 1,780 3/6 🟩⬜🟨🟨🟨 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,780 4/6 🟨⬜⬜⬜🟨 ⬜🟨🟨🟨⬜ 🟩🟨🟩🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.