Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4593 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Driver to 45 inches from 45.5 ... clubmaker did it. He put a little hotmelt in the head and installed different weights to get the R1 to D3.

Fairway woods - if you cut, you affect club balance. You can offset the shorter club with a heavier shaft; you can keep the OEM shaft and have install a heavier weight in the head (if applicable), if NA, clubmaker can hot melt, or you can place some lead tape on the club head or even on the hosel... if you do hot melt, too much is a bad thing ... makes head too heavy and takes out any feeling of liveliness in the clubhead -- use sparingly.

Ping G400 Max 9/TPT Shaft, TEE EX10 Beta 4, 5 wd, PXG 22 HY, Mizuno JPX919F 5-GW, TItleist SM7 Raw 55-09, 59-11, Bettinardi BB39

 

Awards, Achievements, and Accolades

Posted

Thanks!

Yeah, I want to go to a 44"-44.5 driver. I've been experimenting with choking up a half inch and see no loss of distance, but tons of feel and a lot more accuracy. It's an obvious improvement, but I'm worried that cutting the shaft won't be the fix. I think I'm just going to continue anthony kimming it... :)


Posted

I recommend that you put some impact tape on the clubface, and hit some balls.  If the impact tape shows that you are consistantly hitting in the center of the clubface then I would not shorten the club.  If you are hitting consistently on the toe or heel then you could try just adjusting your setup.  For example if you setup with the ball in the center and you consistently have a toe impact, you could setup with the ball positioned more on the heel.  If you setup with the ball in the center and you consistently have a heel impact then you could change your setup by positioning the ball at the toe.  If your impacts are all over the place, then you could consider shortening the club so you have better control and get a more consistent impact.


Posted
Originally Posted by Second Chance

Has anyone actually cut their driver/3W shafts down? If so, what length did you go with and why? Where there any issues you encountered doing it...?

I had my Ping G15 cut down to 45" from 45.75. I am making much better contact in the center of the club face, which leads to more fairways hit. I don't feel I lost any distance, but picked up accuracy. Shortening the shaft did affect the swing weight, so I got some lead tape and headed to the range. I would hit about 10-15 balls, add a strip of lead tape to the the bottom of the club and hit another 10-15 balls. I repeated this until I got the ball flight I was looking for. I have no idea what the swing weight of my driver is, all I know is that I'm happy with it.

I will never play with a driver length longer than 45" again, and am considering taking another 1/4"-1/2" off.  Good luck.


Posted
Originally Posted by rick0502

What kind of tape did you use and where did you get it?

Assuming you are asking about impact tape, you can get it at most golf stores.  It comes in 2 shapes, one for driver club face, and one for the iron clubface.


Posted
Originally Posted by BBailey

I had my Ping G15 cut down to 45" from 45.75. I am making much better contact in the center of the club face, which leads to more fairways hit. I don't feel I lost any distance, but picked up accuracy. Shortening the shaft did affect the swing weight, so I got some lead tape and headed to the range. I would hit about 10-15 balls, add a strip of lead tape to the the bottom of the club and hit another 10-15 balls. I repeated this until I got the ball flight I was looking for. I have no idea what the swing weight of my driver is, all I know is that I'm happy with it.

I will never play with a driver length longer than 45" again, and am considering taking another 1/4"-1/2" off.  Good luck.

Thanks man!

I have the diamana x60 shaft XXXX/5000...which retails for "WAY TOO MUCH"... and I would hate to cut it, screw up the swing weight and have to deal with the aftermath of wasted money. I'm in communication with my club fitter, but he seems to think I'm crazy. Funny how sensitive clubmaker's are...regardless of the overwhelming data to support this argument.

Either way, once I get the right amount of choke up-- I'll probably go the same route you did. My current project is bending my irons flatter and flatter...I'm going to get rid of the left side of the golf course if it kills me! :)


Posted
Originally Posted by rick0502

What kind of tape did you use and where did you get it?

You can pick up lead tape at any golf store. I got mine at Dicks Sporting Goods, less than $5. It's self adhesive and you just cut it the length you want and apply it. You can add or remove it as needed without much hassle. Hope that answered your question.


Note: This thread is 4593 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 38 (18 Dec 25) - got out in the backyard with grandson this afternoon.  We got into a little game of pitching the ball from about 25yds to a target point just off the asphalt lane behind the backyard.  Goal - just clear it with a quick hop and stop.  Focused on using the wedge swing motion I was talking with the course pro yesterday….smooth and thru just bruising the grass.  In addition to a concentrated focus on technique, it also called for a quiet mind locked in on target point.  Rehearsed this with both the 50° and 55° wedges.  
    • I listened to the Shaun Webb one about the swing coach app. Sounds like a great thing and will (hopefully) be very useful for me. I do think the hosts are underestimating where AI could be in a few years. Right now it's just regurgitating stuff that it has been told or it has scrubbed from somewhere else and a human guiding things will be quite a lot more helpful than just the AI, but it's going to keep developing and it will reach the stage where it's figuring this stuff out on its own. Time will come when it will have you do a TPI style screen and take various height/arm length/leg length etc. measurements, have you tell it some history and your time constraints and goals and what not and it will watch a video of your swing face on and DTL and it will know exactly what you need to work on. 
    • I found it entertaining, but the announcing was lousy.  How did the measuring on the final shot start with Rory being closer and being told he won, and then with no explanation it turns out Scottie won?  Weird.
    • Day 128 12-18 Worked on rotation and getting to lead side. Still working on the flow feeling while doing that. Recorded swings. 
    • IMO-the only thing entertaining was the relay race. Everything else was excruciatingly boring...or just  stupid, like the 14-club thing. Watching guys blade wedges into the water over and over is not at all interesting.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.