Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4337 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Greetings!

I just bought a new Ping Karsten Anser 2 1959, and so far I love it. Yet there is something about the alignment aid that is throwing me off. I put a piece of blue painters tape over it, and I immediately started dropping putts right in the heart of the cup. I would rather not have a piece of tape on my putter. Is there a way to remove or hide the line that would look decent? Is this something a local shop may be able to do?

Thanks in advance!!


Posted

I have found a black line is let noticeable then the white line. I used a Elmer's Painters pen that I bought at office max to change mine. If that does not suit your eye use some paint remover and a brass brush.


Posted

If your putter is grey, I'd also consider a piece of lead tape.  A piece small enough to cover a line isn't going to really change the weight of the club enough to be noticeable, and it will blend in with the rest of the putterhead.

Source:  A guy who put lead tape all over his grey Ping Pal 2 and can barely see that its there.  And it was several pieces, specifically for weight, and I still can barely tell the difference, which is why I believe that such a small piece shouldn't bother you.

Awards, Achievements, and Accolades

Posted

Greetings!

I just bought a new Ping Karsten Anser 2 1959, and so far I love it. Yet there is something about the alignment aid that is throwing me off. I put a piece of blue painters tape over it, and I immediately started dropping putts right in the heart of the cup. I would rather not have a piece of tape on my putter. Is there a way to remove or hide the line that would look decent? Is this something a local shop may be able to do?

Thanks in advance

I can think of 2 ways to do this...

Find a paint that will hide it enough to not bother you

Get some paint stripper and strip the paint away from the channel completely..This would still have the channel for the paint fill but would look like the rest of the putter...


Posted

As stated above A piece of lead tape would do the trick. Another thing you can do is to paint it. I normally would switch putters because I am a club ho ;-) . The thing with sight lines is that they are there to try and help you aim and if you feel that the sight line is distracting and thus affecting your aim then you definitely should consider a putter without one at all. Many putters come with a sight dot which I quite enjoy but everyone is different!

Sam Gray

Whats in my :ping: Ping Hoofer Carry Bag?
Driver: :ping: Ping G25 9.5*    Shaft: Graphite Design AD DI 7x
3 Wood: :callaway: Callaway X HOT Pro 3 Deep 14.5       Shaft: Diamana Blue Board 83x
Hybrid: :adams:
 Adams A12 prototype 20*  Shaft: Aldila Rip NV blue prototype 80x
3 iron--Pitching Wedge: :mizuno: MP-64 irons 1* flat      Shafts: KBS Tour Stiff 
Wedges: :cleveland: 588 Forged 54 degree 12 degree bounce and 61 degree 9 degrees bounce   
Putter: :ping: Ping Karsten 1959 Anser 2


Posted

Thanks guys! I have had site lines before, but something about the way this one is, it just jumps off the club and slaps me in the face. When on the putting green, I tried hiding the line with a quarter, and instantly had better aim. Thinking I may try and paint the line first. Any suggestions on what kind of paint will stick?

Thanks!!!


Posted

Try the Elmer's Painters pen it is real easy just blot it on a piece of paper and run it across the line.  This is one to look at http://www.amazon.com/Elmers-Painters-Opaque-Marker-Silver/dp/B000BREQFW/ref=sr_1_8?ie=UTF8&qid;=1391128493&sr;=8-8&keywords;=Elmer%27s+Painters+pen


Posted

Well, I decided I would try the least toxic and easiest to find option first. Nail polish remover. It's the good stuff. I soaked it for about 5 minutes, and used the point of a pair of tweezers, and it began to chip. So I put some more on the area and let it soak for about 10 minutes. A lot more came off the second go. After 5 or so applications, some elbow grease, and the use of an old toothbrush, toothpick, and the tweezers, it was clean as a whistle. Hit a few balls here in the house, and right away I can tell my aim is better. Thanks to everyone for your replies and ideas.


Posted

DYI is the way to go.  But i fail to understand why or how a small colored line which is placed precisely where it should be on the putter can influence your putting ability. I like my putter head line and believe it helps me hit the ball square on.


Note: This thread is 4337 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I am semi-loyal. Usually buy four dozen of one ball and only play that until out and then determine whether to continue or try another one. Since starting my semi-loyal path to success, I've been playing the below, not in order: ProV1 ProV1x ProV1x left dash AVX Bridgestone BXS Srixon Z-star XV I am not sure if it has helped anything, but it gives a bit of confidence knowing that it at least is not the ball (while using the same one) that gives different results so one thing less to mind about I guess. On the level that I am, not sure whether it makes much difference but will continue since I have to play something so might as well go with the same ball for a number of rounds.  
    • Will not do it by myself, going to the pro shop I usually use after Cristmas for input and actually doing the changes, if any, but wanted to get some thoughts on whether this was worthwhile out of curiosity. 
    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
    • I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.