Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 7468 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hey folks.... I picked up a Scotty a few months back and it is clearly too long. I'm choking down a full inch. Its a 35" putter and I'm needing it in the 34" range. Can you comment on how to cut it down and how this might effect swing weight and any other issues I need to think about? I'm not sold on doing it myself BTW, just curious what I need to think about to keep this putter well balanced should I have it shortened a bit.

Jeff

10.5° Callaway FT-iZ Tour

18°, 20°, 23° Adams Idea Pro Prototype Hybrid

4-9 Titleist 690.CB
48° Titleist Vokey Tour Nickel
54°, 58° Titleist Vokey Tour Oil Can

Scotty Cameron NP2, 33"

Awards, Achievements, and Accolades

Posted

Cutting it down will lighten the swing-weight - you will feel slightly less weight in the head therefore.

Once grip is removed (either cut off carefully - not marking the shaft if possible - with a stanley blade - or syringe it off with petrol,white-spirit etc if you want to preserve the original grip) you can cut the shaft down with a hacksaw if careful,or more preferably a shaft/tube cutter (make sure its got a sharp blade in it ).You can then use double sided tape and some sort of petroleum based solution (either petrol,white spirit,turps etc ) to activate the tape so that you can then re-fit either the original grip if you can remove it,or fit a new grip of your choice.

You could do this and then try the putter as it is,or if you find it is indeed too light,you could make it a little heavier again by the way of some sticky lead tape attatched to the head on the outside - equal amounts on the heel and toe perhaps,or perhaps by ramming some small pieces of lead tape or some lead shot right down the shaft (before grip is fitted) and ramming down with a long rod and sealing in with a piece of cork etc so that the extra weight is way down at the bottom of the shaft - almost inside the head so to speak - and this way wont effect the outside appearance at all.

Both ways are reversable,and the shaft can always be extended again by way of a old shaft to use as an extension if you either dont like it as 34",or want to return to 35" at a later date.

Have a go yourself - BE BRAVE MAN !!!!!!!!

10.5 deg Titleist 905T.S-flex Graph-design purple ice.
TaylorMade 200 3wood.S-flex Graph-design purple ice.
19 deg Taylormade rescue-mid with 6.0 Rifle flighted.
Callaway 3-PW X-16 Pro series with 6.0 Rifle flighted.
Cleveland 56+60RTG/Custom 34" Yes! Sophia/Pro-V1syershulver1@msn.co.uk


Posted
Have a go yourself - BE BRAVE MAN !!!!!!!!

Now thats the kind of advice I like to hear. What the heck right? The worst thing that can happen is that I'd have to replace a shaft (gasp). I'll quite chewing my nails and start hacking on the thing. Thanks for the encouragement.

Jeff

10.5° Callaway FT-iZ Tour

18°, 20°, 23° Adams Idea Pro Prototype Hybrid

4-9 Titleist 690.CB
48° Titleist Vokey Tour Nickel
54°, 58° Titleist Vokey Tour Oil Can

Scotty Cameron NP2, 33"

Awards, Achievements, and Accolades

Posted

GODSPEED JOHN GLEN....

Well,ok,perhaps the moment isnt quite that historic


Keep us informed ! How about a few pics of a "new mastercraftsman" at work ????? lol

GOOD LUCK.

10.5 deg Titleist 905T.S-flex Graph-design purple ice.
TaylorMade 200 3wood.S-flex Graph-design purple ice.
19 deg Taylormade rescue-mid with 6.0 Rifle flighted.
Callaway 3-PW X-16 Pro series with 6.0 Rifle flighted.
Cleveland 56+60RTG/Custom 34" Yes! Sophia/Pro-V1syershulver1@msn.co.uk


  • Administrator
Posted
I've always bought my putters an inch longer than I'd like. That extra inch comes in handy when you have 80 feet to the hole. The rest of the time, there's nothing wrong with gripping down a little.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
I've always bought my putters an inch longer than I'd like. That extra inch comes in handy when you have 80 feet to the hole. The rest of the time, there's nothing wrong with gripping down a little.

I keep my approach shots inside of 80 feet, so I don't worry about having to choke down.

Josh Premuda
www.thesandtrap.com

Driver Titleist 905T 8.5 degrees
Ping I2 3-wood 14 degreesTitleist 503.H hybrid 22 degreesTitleist DCI 962 3-9 6.5 Rifle shaftTitleist Vokey Oil Can wedges 48, 58 degreesScratch Golf 3x Black Wedge 54 degreesBig Oak Putter, T'ville 34"

Awards, Achievements, and Accolades

Posted
If you're going to cut a shaft down, I'd recommend a trip to Home Depot. Buy a pipe cutter, it'll make your job much easier. You can also pick up mineral spirits, it does that same thing as 'grip solvent'...and it's a little cheaper.

Good luck and enjoy! Once you start tinkering, you're not going to be able to stop.

What's in My Bag?

Driver: Taylor Made 510TP 8.5 w/proto Aldila NV 65X
Wood: PT 15 bore thru, X100
Hybrid: 503H, 19 deg, S300Irons: 680, 3-PW, Freq. Matched X100Wedges: Black Nickel Vokey 54.10, 60.08Putter: Scotty Cameron Newport Oil CanBall: ProV1x


Posted

I was always taught that the main reason we all complain as golfers is "inconsistancy".Hardly surprising in a game where holes,shots,wind, weather,temerature,companions,courses,countries,continents etc etc are all variables.The only possible two consistant factors are you,(the golfer) and your equipment.

Regarding gripping "up" your putter for those long putts - you now have a different green,a different length putt,a different speed,a different break,a different view of the ball,AND of your intended line due to your slightly changed posture,AND effectively a different putter (by changing the length) Isnt that making more variables ? Where is the consistancy in that equation ?

Small difference's perhaps i admit,and im sure it works for some people otherwise they wouldnt advise it !!!!!!

Im not disagreeing - its only my/one point of view.Just throwing other idea's into the fire.....

10.5 deg Titleist 905T.S-flex Graph-design purple ice.
TaylorMade 200 3wood.S-flex Graph-design purple ice.
19 deg Taylormade rescue-mid with 6.0 Rifle flighted.
Callaway 3-PW X-16 Pro series with 6.0 Rifle flighted.
Cleveland 56+60RTG/Custom 34" Yes! Sophia/Pro-V1syershulver1@msn.co.uk


Posted
For some reason that extra inch that I have to choke down on the putter bugs me. It doesn't sit right for me and so I'd like to make it a bit better. Plus the greens that I putt on aren't that long and I suppose when I do get an 80' putt I'll just have to "get creative" as golf commentators are so fond of saying.

Jeff

10.5° Callaway FT-iZ Tour

18°, 20°, 23° Adams Idea Pro Prototype Hybrid

4-9 Titleist 690.CB
48° Titleist Vokey Tour Nickel
54°, 58° Titleist Vokey Tour Oil Can

Scotty Cameron NP2, 33"

Awards, Achievements, and Accolades

Posted

I cut my Macgregor down from 35 to 33.5. The hacksaw blade was a bit blunt so I used a grinding disc (Only do this if you are competent). Luckily on the macgregor there is a weight at the back, when I took it out there was a hollow section so I added some lead tape then screwed the weight back in - jobs a good'un

8.5 TM R7 TP, Aldila NVS stiff
14 PING TISI TEC, Grafalloy Tour stiff
16 TM Rescue, Aldila NV stiff
3 - PW PING S59 Tours
52 Mizuno MP T Black Ni57 Mizuno MP T Black NiMacGregor Bobby Grace M5K


  • 2 weeks later...
Posted

Just a good sharp blade and a new found sense of courage! (ok maby a little off the wall but we will stick with courage because it sounds good!)

Ace Adair


904R 10*
I3 4 Wood 17* G5 Hybrid 22* CG-4's 4-PW Vokey Design 200 Series-- 50*, 54*, 58* G2 Anser Putter 35" ProV1 Hoofer 3 Bag "Putts get real difficult the day they hand out the money." -Lee Trevino "You are one evil, cunning woman. It's a massive turn on."--House...

  • 3 weeks later...
Posted

Well, after all the fuss, I was passing by Golf Discount with my Scotty in the trunk and popped in to buy a grip and ask a couple of questions and walked out with it cut down. This putter feels awesome. It puts a great roll on the ball and as I said, feels like a million bucks. It is now 34 and 1/4 inches... feels like a totally different stick.

It has displaced the Yes! Olivia that I have grown so fond of. Olivia has treated me well, but my bag matches with the Scotty. Plus people can say, "Oooohhhh. Scotty!" when I pull it out. Actually nobody says that... its just a day-dream.

Jeff

10.5° Callaway FT-iZ Tour

18°, 20°, 23° Adams Idea Pro Prototype Hybrid

4-9 Titleist 690.CB
48° Titleist Vokey Tour Nickel
54°, 58° Titleist Vokey Tour Oil Can

Scotty Cameron NP2, 33"

Awards, Achievements, and Accolades

Posted
You're nuts..don't mess with your SC. Once you do and you want to sell it no one will touch it..it really throws off the weight and it was designed to be that long. If you want a shorter Scotty..buy one..choke down.

oops..too late..

Posted
You're nuts..don't mess with your SC. Once you do and you want to sell it no one will touch it..it really throws off the weight and it was designed to be that long. If you want a shorter Scotty..buy one..choke down.

Correct, I am nuts. But that has little to do with the Scotty I chopped. And yes, too late. I sure like it now, even though it's ruined.

Jeff

10.5° Callaway FT-iZ Tour

18°, 20°, 23° Adams Idea Pro Prototype Hybrid

4-9 Titleist 690.CB
48° Titleist Vokey Tour Nickel
54°, 58° Titleist Vokey Tour Oil Can

Scotty Cameron NP2, 33"

Awards, Achievements, and Accolades

  • Administrator
Posted
Correct, I am nuts. But that has little to do with the Scotty I chopped. And yes, too late. I sure like it now, even though it's ruined.

It's only ruined if you can't use it to make putts. If it works for you, that's hardly "ruined."

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
It's only ruined if you can't use it to make putts. If it works for you, that's hardly "ruined."

true, I was just thinking for those avid collectors that are looking for OEM specs..I chopped a Carbite BB series and it worked for me too..


Note: This thread is 7468 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.