Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3507 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hi,

These spots have appeared on my TaylorMade Speedblades in the last couple of months..

Nothing I do can get rid of it?

 

Cheers

Keith

IMG_1033.jpg


Posted

Sorry I can't help, but I think it gives them some charm.

Awards, Achievements, and Accolades

Posted
Just now, bm85 said:

Sorry I can't help, but I think it gives them some charm.

Lol.. I don't mind it either but I purchased these on a whim when I had a BAD case of the shanks 6 months back but I am now back to my Mizuno JPX 825's and was looking at selling the SpeedBlades..

Cheers

Keith


Posted

I could see how reselling might be difficult. There are some definite tinkerers lurking here, I know @WUTiger seems to know a lot about gear.

Good luck!

Awards, Achievements, and Accolades

Posted

I'll have to check with local clubsmiths on the spots. More later.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
On 4/29/2016 at 2:01 AM, PhxHacker said:

Looks like oxidation of the metal

A clubsmith at Golf Galaxy agrees with this.

Also, I asked my brother, a retired soil survey specialist who golfs quite a bit. He had some additional comments. (He's increased his golfing in retirement).

  • If the spots are mainly on your high usage irons - wedges, 8i - then the coating on the irons may be wearing through. This would especially be the case if you play in sandy turf, with the sand particles abrading the coating all the time.
  • In Sydney - down under - April is in autumn. If you've been having increased moisture and didn't wipe down your irons after play, this could trigger discoloration.
  • And, the greenskeepers might be involved. If your course put down some nitrogen-heavy fertilizer, the fertilizer + moisture --> nitric acid, which is corrosive to metals.

So much for the science lesson. Have a good autumn of golf. :-D

  • Upvote 2

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

try some metal polish and a rag.  Brasso would probably work, but there may be better ones.


Posted
10 hours ago, WUTiger said:

A clubsmith at Golf Galaxy agrees with this.

Also, I asked my brother, a retired soil survey specialist who golfs quite a bit. He had some additional comments. (He's increased his golfing in retirement).

  • If the spots are mainly on your high usage irons - wedges, 8i - then the coating on the irons may be wearing through. This would especially be the case if you play in sandy turf, with the sand particles abrading the coating all the time.
  • In Sydney - down under - April is in autumn. If you've been having increased moisture and didn't wipe down your irons after play, this could trigger discoloration.
  • And, the greenskeepers might be involved. If your course put down some nitrogen-heavy fertilizer, the fertilizer + moisture --> nitric acid, which is corrosive to metals.

So much for the science lesson. Have a good autumn of golf. :-D

HI, 

Thanks for the detailed response..

The spots are on all irons

I usually (try to remember) to clean after each shot but do clean my after clubs after every round

Greenkeeper?  maybe... It hasn't happened with my Mizunoo JPX 825's  but then again that probably has to do with the different finish on both clubs.. 

 

Anyway a bloke from the golf club is interested in buying them, I have given them to him to try out for 2 weeks before deciding if he wants to purchase them..

Thanks everyone for the help.. We are having a rather unusual Autumn (Fall) here in Sydney so golfing is good, but we do get to play year round here because the weather is so good...

Thanks Again,

Keith

6 hours ago, ppine said:

try some metal polish and a rag.  Brasso would probably work, but there may be better ones.

Tried Brasso and Silvo hell even tried Toothpaste lol.... All to no avail lol..

 


Note: This thread is 3507 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Wordle 1,631 3/6 🟨⬜🟨🟨⬜ 🟨⬜🟨🟩⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,631 3/6 ⬜🟩🟩🟩⬜ ⬜⬜⬜⬜🟩 🟩🟩🟩🟩🟩
    • Wordle 1,631 3/6 🟨⬜🟨🟨⬜ 🟨🟩🟩⬜🟩 🟩🟩🟩🟩🟩
    • Is it? I bought the Stack radar to replace my PRGR based on what Stack told me! When I am swinging for speed, the PRGR would miss 50%-80% of my backswings due to a higher speed. The stack seldom misses those- at least for me.
    • As an analyst by nature, I would like to compare the scores under both systems. It is something we can easily do if we have the data. I actually thought the new system was less fair to those whose game was on the decline - like mine! Old: Best 10 of last 20 scores with the .96 multiplier. Course handicap excluded course rating and overall par. New: Best 8/20. Course handicap includes course rating -par. My understanding is Stableford caps scores at Net double bogey like stroke play. If so, handicap should be slower to rise because you are only using 8 versus 10 scores. If I am missing something, I am curious enough to  want to understand what that may be. My home course tees that I play are 72.1/154 now. My best score out here is 82. When my game started to decline, my handicap didn’t budge for 13 rounds because of good scores in my first 8! I know I am an anomaly but my handicap has increased almost 80% in the past few years (with only a few rounds this year). For a few months I knew I was losing every bet because my game was nowhere near my handicap. I suspect I have steamrolled a few nuances but that shouldn’t matter much. When I have modeled this with someone playing the same tees and course, one good round, or return to form, will immediately reduce the handicap by some amount.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.