Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 2125 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted (edited)

I have a set of TM 2017 M2 irons (4-AW) with regular steel shafts. Age and arthritis are beginning to take their toll on my body. My pro suggested I go to graphite shafts. I've looked for a set like mine with graphite and found a couple. However, I'm wondering if it might not be cheaper to re-shaft my set. I guess I could trade my set and put the proceeds towards the purchase of the new set. Anyway, I'm just looking for advice on what to consider. Most of the posters here usually have good insights. Thanks for letting me know your thoughts.

Edited by Hoganman1

Posted

I think that's a loaded question.

Graphite shafts for irons start around $15/ea. and go up quickly from there. So assuming you're going to shaft them yourself and you get something in the $25/ea. range, then you're looking at $225 +shipping (9 clubs x $25) plus a few dollars for the epoxy. And don't forget you'd have to move the grips from the old shafts to the new ones. Unless you're getting new grips too, then you can add about $50-100 onto the total depending on what grips you get. 

I checked on 2nd Swing and they're selling a 6 club set of M2's around $320.

So unless you're really attached to your current setup, I'd sell them and look for a used set of graphite irons.

Just my $.02

Good luck and let us know what you decide!

Awards, Achievements, and Accolades

Posted

Even if you do the work yourself; by the time you factor in the cost of the new shafts, and possibly grips, the tariff could be a couple hundred bucks...and that is predicated on buying the cheapest shafts available.  If you are not looking to spend any more than that; buying another set is probably going to be the least expensive option.

In der bag:
Cleveland Hi-Bore driver, Maltby 5 wood, Maltby hybrid, Maltby irons and wedges (23 to 50) Vokey 59/07, Cleveland Niblick (LH-42), and a Maltby mallet putter.                                                                                                                                                 "When the going gets tough...it's tough to get going."

Awards, Achievements, and Accolades

Posted (edited)

Good points from both of you. I don't do my own work so I'm probably looking at even higher costs. Dick's will buy my set for $180 and they have a graphite set like mine online for $700 so that seems like the way to go. Plus I know I'm getting shafts designed for this particular set of irons. Thanks for your input.

Edited by Hoganman1

Posted
4 hours ago, Grass Destruction said:

I checked on 2nd Swing and they're selling a 6 club set of M2's around $320.

So unless you're really attached to your current setup, I'd sell them and look for a used set of graphite irons.

 

This^^^^


Note: This thread is 2125 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 9: 2026.01.11 Hit some balls at the range, concentrating on weight distribution at address, got some on film.
    • Day 468 - 2026-01-11 Loooooong day. Did some work in the patio door (as a mirror) when I got home.
    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
    • Wordle 1,667 3/6 🟨🟨⬜⬜⬜ ⬜⬜⬜🟨⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,667 3/6 ⬜⬜🟩⬜⬜ ⬜🟨🟩⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.