Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6488 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Decided I would do it myself from now on.
Bought the grips, the solvent and the tape.....................but was not thinking about removing the old tape.
Could take months with a blade.
Ideas please!!

Posted
Soak the tape with some grip solvent and then it scrapes off easily.

1W Cleveland LauncherComp 10.5, 3W Touredge Exotics 15 deg.,FY Wilson 19.5 degree
4 and 5H, 6I-GW Callaway Razr, SW, LW Cleveland Cg-14, Putter Taylor Made Suzuka, Ball, Srixon XV Yellow


Posted
anything with acetone? nail varnish remover works a charm.

WEAPONS:
Taylormade R9 10.5 L Grafalloy Prolaunch Platinum stiff 65g
Taylormade R9 15 NU YS+6 stiff 65g
Taylormade R9 19 NU YS+6 stiff 65g
Taylormade Tour Preferred 4-PW KBS Tour X-Stiff Cleveland CG12 RTG+ DSG 51Cleveland CG12 RTG+ DSG 55Cleveland CG12 RTG+ DSG 59Yes! Tracy II putterTitleist...


Posted
I've always used my fingernails, takes a buttload of time. I'm going to invest in one of these though. Got to regrip my clubs soon...

http://www.golfsmith.com/products/8228

Callaway RazrFit Extreme 9.5 w/Project X 6.5
Callaway XHot Pro 15* 3Wood w/Project X 6.5
Callaway XTour 18* 2h w/S300
Callaway XHot Pro 4/5 irons w/S300
Callaway XForged III 5-PW irons w/S300
Callaway Forged 52*/58* Wedges
Odyssey 7 Versa 90
Callaway Hex Black Tour


Posted
I regripped my old set a few months ago and the tape just peeled off each club in under a minute. I get to my brand new Vokey 60 and the tape was mummified (the 54 was fine). I soaked it, scraped it, fingernailed it, etc and that one shaft took me 15 minutes to get it clean. If I had that tool that Ben referred to it would have saved me some major time (like 13 minutes). Luckily it was only that one.

Great investment!

Callaway AI Smoke TD Max 10.5* | Cobra Big Tour 15.5* | Rad Tour 18.5* | Titleist U500 4i | T100 5-P | Vokey 50/8* F, 54/10* S,  58/10* S | Scotty Cameron Squareback 1


Posted
I've always used my fingernails, takes a buttload of time. I'm going to invest in one of these though. Got to regrip my clubs soon...

I agree with this tool...it works great! Grip tape comes right off.

Je joue au golf, et j'aime ca.
-------------------------------------
Nike SasQuatch Sumo2
HaLo 2i & 3i
3100 I/H 5-GW588 Gunmetal 53/56/60White Hot XG #2Vector BagProV1x

Posted
I've always used my fingernails, takes a buttload of time. I'm going to invest in one of these though. Got to regrip my clubs soon...

Best combination for removing old tape. Get a blow dryer and heat up the tape. Then use the scraper that Ben refers to. Watch TV at the same time and you can get the tape off in 2 minutes. There's nothing more satisfying than watching tape peel off so easily.


Posted
1-get a stanley knife and remove grip...pull club in to tummy/gut and cut away from you..you should cut from end of grip up to butt.

2-chop old tape away with knife.

3-put white spirit in to new grip and poor over new tape..remember to put thumb over butt end where hole is

4-slip the grip on-the white spirit is like a lubricant ..lol.

Golf Pride Tour Velvets are the best.

Posted
I've always used my fingernails, takes a buttload of time. I'm going to invest in one of these though. Got to regrip my clubs soon...

I sure hope you have better luck with that tool than I did. The steel on the one I bought obviously wasn't tempered and the edges curled up like little girl curls. I ended up using a razor blade and didn't cut myself up too bad doing 13 clubs. I will probably go the industrial hair dryer like heater route next time with some non-flammable solvent.

David C. Cleveland

In My Bag:

Driver: Big Bertha 4603 Wood: Big BerthaHybrid: Rescue Dual 3 19 degreeIrons: Big Bertha 2006Wedges: x forged mdPutter: 33 inch Natalie center shaftedBall: HX TourHome Course: Wellshire Golf Course, Denver, COVisit my musings at...


Note: This thread is 6488 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.