Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 5273 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Hey guys,

I just yesterday received my new MP67's , they have got golf pride tour velvets on them. I was going to get them with multicompund grips but it would have cost an extra £40 ($80) for the 7 clubs. I have been looking at ebay and there is a company called sharpro who do a grip very similar (i think it is meant to be a copy) and i can get 13 grips for £25 ($50) and i was wondering if anyone had any experience with them?

Thanks a lot

Driver - 905r 9.5* with UST Proforce VT Stiff
3 Wood - SQ 3+ 13* with Grafallloy prolaunch blue Stiff
5 Wood - SQ 5* 19 with Aldila NV65 stiff
Irons - MP 67 3 + 5-PW 2deg Up + 1/2" with DG S300 shaft.
Wedges - SV 52/10 with true temper s400 BV Spin Milled 56/10 Wedge Flex BV Spin Milled 60/04...


To be honest, if you get these other ones for £25 then add the cost of the other items required for fitting, and the time to do it, the extra £15 to have had the grips you wanted in the 1st place would have been the better idea... Now you've effectively paid for grips you didn't want.

No idea about the quality of the ebay grips, although I have seen them advertised a lot on there. Sorry!

Superquad
Fusion #3
Big Bertha Warbird #5
755 3-PW
Vokey SM56.10 & 60.08 White Hot 2-ball


It does work out a bit cheaper in the long run as for the money i can regrip all of my clubs (which need doing) rather than just have my 7 irons with the new grips. Thanks for the advice though

Driver - 905r 9.5* with UST Proforce VT Stiff
3 Wood - SQ 3+ 13* with Grafallloy prolaunch blue Stiff
5 Wood - SQ 5* 19 with Aldila NV65 stiff
Irons - MP 67 3 + 5-PW 2deg Up + 1/2" with DG S300 shaft.
Wedges - SV 52/10 with true temper s400 BV Spin Milled 56/10 Wedge Flex BV Spin Milled 60/04...


Another quick related question, as of the moment all of my clubs are standard grips with 1 tape, i have got big hands, 8" from wrist to finger top and 3.5" middle finger so probably require 3 layers to build the grip sufficiently. Will this adversly affect the swingweight of the clubs?

Thanks for the help

Driver - 905r 9.5* with UST Proforce VT Stiff
3 Wood - SQ 3+ 13* with Grafallloy prolaunch blue Stiff
5 Wood - SQ 5* 19 with Aldila NV65 stiff
Irons - MP 67 3 + 5-PW 2deg Up + 1/2" with DG S300 shaft.
Wedges - SV 52/10 with true temper s400 BV Spin Milled 56/10 Wedge Flex BV Spin Milled 60/04...


  • 1 year later...

Has anyone used them? I bought a set and put them on last night. I swung them around a bit tonight, (in the house because we have 4 inches of snow outside ). They feel very good, went on nice and look sharp, plus I got them for half the price of the Golf Prides. Hopefully they hold up well.


Has anyone used them? I bought a set and put them on last night. I swung them around a bit tonight, (in the house because we have 4 inches of snow outside

I picked up 20 of them on Amazon. I use the dual-pro version on my wedges. They are terrific grips, I can't believe the quality vs price ratio. I expected less. Durability so far, seems really good. I will replace them long before they are worn out though.

I can't concieve of 4 inches of snow....much less right now!!!!!!!

I wish we could level out our two state's summer weather, though. It's gonna be nice...around mid / low 80's this weekend here....but in a few weeks it will be crazy hot.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

I have not used the Sharpro grips but I used to always put Tour Velvet knock-offs from Kelmac on my clubs. They were great grips when new, but they wore out much faster than the good grips. I don't know if the same thing is true of Sharpro, but even if you have to change them mid-season, you will still break even. Plus you get to use new grips twice.

Keep us posted later in the year, I am curious as to how they hold up.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


I use the multi compound on all of my clubs and they feel as good as the golf pride versions. The only difference is that the colour does run a little, but hey, im not that fussed when i payed one third of the price of the golf prides!

Driver - 905r 9.5* UST Proforce V2 Stiff
3 Wood - 906f2 15* UST Proforce V2 Stiff
5 Wood - SQ 19* Aldila NV Stiff
Irons - MP67 3, 5-PW DG TT S300, 1/2 inch longer 2* Upright
Gap Wedge - SV 52* 10* Bounce DG TT S400Sand Wedge - Vokey Spin Milled 56* 10* Bounce DG TT Wedge FlexLob Wedge - ...


4 inches of snow!?! it hit 100 degrees in parts of the valley

OG Hoofer bag
Titleist 905R 9.5°, Grapite Design YS-6+ (S)
Callaway Warbird 4 wood, Grafalloy ProLaunch 65S
Ping ISI-s: JZ Cushin Regular flex, white dot
Titleist Vokey Design 54° "AW", Cleveland 588 60° "LW", Ping IWI Craz-E

Home Course: Falcon Dunes, Luke AFB, AZ


Can you re-grip with just buying the solution, tape, and grips? I don't have a table with a vice grip or anything.

« Keith »


purchased 20 on ebay for 46.00..

re gripped my wedges first, and really liked them, then i did the same for my hybrids and short irons as i grew more comortable with them and realized that they are great grips..

now i have all my clubs with them, and dont expect to channge until i find someting i like better.. i purchased the yellow and black combo and they are very sharp, no pun intended.ha

  wrx_junki said:
Can you re-grip with just buying the solution, tape, and grips? I don't have a table with a vice grip or anything.

Yes, you don't need the table and clamp. I have never used one and re-grip once or twice a year. It is easy enough to do by grabbing the club in your hands.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


But be sure to re-grip over a sink or in the garage, the solvent will run all over. I've been doing my own grips for years, easy to do, just takes a little time.

Craig 

Yeah, wanna make 14 dollars the hard way?


This might be off topic a little bit but have you guys ever used Star Grips before?
I was regripping my wedge a week ago and I had the choice between Sharpro tour velvet and Star Grip tour wrap, I went with Star Grip.
I still haven't used it at all so I don't know how good it is.
My achievements:
Eagles: 0
Birdies: 18
Best Round: 89

I use a clamp and vice when changing grips. I use a grip cutter blade for removal. Put a tee in the grip end for sliding on, and push hard and quick, do not stop, and use plenty of liquids. I use charcoal lighter fluid to slide the grips on with.

the short game equalizes everything
FT-5 Draw 10.5
NVG woods 3,5,7,9
Orlimar 4hy
Wilson DI-5 Irons 6-pwTurner wedge 51* bent to 53*TM TP 54* SW bent to 57*Wilson Kirk Currie #2 Mid MalletLaddie X


  • 1 month later...
TM R7 SuperQuad - 9.5* Stiff || TM V-Steel 15/18* Stiff || Mizuno MP-52 3-PW PX5.5 || Titleist Vokey OC 52/58* || Odyssey White Hot #1

  • Administrator
I think they're knockoffs of the New Decades and I'd just get the real thing rather than potentially waste money on a copycat.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Note: This thread is 5273 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • So I am aware that "the committee is allowed to set its own standards of player conduct in a code of conduct adopted as a local rule" (rule 1.2b) I also understand that there are some aspects that are allowed to be entered, and some that are not allowed.  My question specifically is: In which form does this code of conduct need to be available? Is it enough for someone to say "that's part of our code of conduct", or is it a requirement, that the code of conduct is in written form? Also, is there a need that the local rule points to the code of conduct in any way?   For better understanding: I'm playing competition and the next course that we play has a "no smoking policy". I don't have a problem with it, as I don't smoke anyway, but one of my team-mates does, and someone told him "You'll get disqualified if you smoke on the course".   Now I have looked at their local rules and there is no reference to a "code of conduct". I'm not sure if they even have an official "code of conduct" that states that smoking is not allowed.   I fully agree that he SHOULD respect this request from the club, but I am wondering if the club would really be allowed to DQ this player for this, if it's not properly documented in their local rules/code of conduct?  This is an official national amateur tournament, so not just something organized by a club for its members.
    • A few months back I purchased the following swing aid on Amazon ($130). It is solidly made of steel and heavy and stable in use. I use it both at the range and at home. Swing Plate Dual PRO by Jamie Brittain - Swing Analyzer Aid - Fits Standard 8mm Alignment Rod Sticks - Teaching Swing Plane Perfector - Indoor/Outdoor Golfing Practice. This winter I set a goal for myself to improve my backswing/downswing to be more consistent and on plane. I had a two way miss with my approach shots this past golf season. I have a hitting set-up in my garage, but I needed something to provide feedback while swinging the club. I came across the Swing Plate while browsing YouTube.   I set it up with the correct angles for my 8 iron. I started out with just the back rod in place, which prevents me from getting too far inside on the backswing. Started out slow and as I got comfortable increased my swing speed. Now I also came across a YouTube video on building a better backswing and getting more width in the backswing and added that to my practice. That video is here:    This video is a bit wordy since you are basically a fly on the wall as Ian gets a lesson. It took a few replays to be able to get the substance of the instruction. It was well worth the effort. Over the last two weeks I have been able to get out on the course and gauge how successful my practice has been. Overall, my consistency with approach shots has improved greatly. Incorporating the added width in my swing has also added a few yards to all my clubs.  What has your off-season training been like?
    • Played Green Knoll today, made three birdies. #10, #14, and #16 knocked off the away composite.
    • Wordle 1,380 3/6 ⬜🟨⬜⬜⬜ ⬜⬜🟩🟨🟨 🟩🟩🟩🟩🟩
    • Wordle 1,380 4/6 ⬜⬜🟨🟩⬜ ⬜🟨⬜🟩⬜ 🟨🟩⬜🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...