Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6354 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hey all. Just wanted to post these up to see what some of you think i can work on.

I'm 6'2", 200lbs and i started playing 3 years ago. Took lessons at a local range within my 1st year and went to a 3 day golf clinic last August. I hit my driver any where from 230-250.

As of now my ball flight with my driver and longer irons is a slight left to right if you couldn't tell already with the videos. I've been working on keeping some flex in my right leg on the back swing (i used to straighten it almost all the way), which in turn has restricted how far i can take back the club (I know, it is a good thing in a way as well). I think this is due to flexibility issues from my shoulder separation injury that i had 5 years ago, but i'm not quite sure. I want to see what you guys can pick out from these videos.

The good thing is that i've been playing the best golf i ever have with getting my HI down to a level i thought wouldn't be possible in the beginning of the season, so i don't know how good of an idea this is

Driver DTL:
http://www.swingacademy.com//SwingAn...l.aspx?id=1631

5 iron face on (shakey vid, sorry):
http://www.swingacademy.com//SwingAn...l.aspx?id=1630

Thanks in advance,
Tom

R7 Superquad 10.5* REAX regular flex shaft
FT 5 wood
675XC forged irons 3-PW, True Temper DG SL stiff(S300) shafts
55* BeCu sandwedge
e6+ balls or ProV1
Cougar X-cat putter (odyssey 2-ball rip-off)

Posted
You have a nice swing, I would work on timming the big muscles of your shoulder and hips with the arms. making a full backswing and finish with your hips square to the target, continue to take the lessons to fine tune your swing.

Titleist 910 D2 9.5 Driver
Titleist 910 F15 & 21 degree fairway wood
Titleist 910 hybrid 24 degree
Mizuno Mp33 5 - PW
52/1056/1160/5

"Yonex ADX Blade putter, odyssey two ball blade putter, both  33"

ProV-1


Posted
Hi,

yours posture (spine) is "off". It should be more straight. Place a club on yours spine axis and try to have posture where lower back touching the club (or 1 finger distance).

regards,

Posted
It seems you get to the top of the backswing, and then immediately swing all out to hit the ball as hard as you can. This is turn makes your arms go over the top.

Try swing by slowly accelerating from the top of the backswing, feeling that your arms are being pulled through by your hips. Start your downswing by moving your left knee towards the target, in turn pulling your left hip around.

In my bag:
Driver: G10 10.5 TFC 129 Shaft
3 wood: R7 Steel
Hybrid: 585H 21 Degree
Irons 3-PW: 735.CMWedges: Vokey 52.08, 56.14Putter: White Hot XG #5


Posted
Hi,

I'm sorry, but i'm going to have to disagree with my spine angle being to tilted at address.

R7 Superquad 10.5* REAX regular flex shaft
FT 5 wood
675XC forged irons 3-PW, True Temper DG SL stiff(S300) shafts
55* BeCu sandwedge
e6+ balls or ProV1
Cougar X-cat putter (odyssey 2-ball rip-off)

Posted
I did a little analysis for you but as always keep in mind this disclaimer:

Beware, advice is being given by 18 handicapper who's understanding about the technical aspects of the game is obviously limited. Or at least his execution of the fundamentals he preaches is flawed.

I saw two things: An over the top move and a reverse pivot. Your setup and takeaway are not bad but you have problems completing the backswing and then taking the swing down. But you are not that far off. They are problems you should be able to fix with a little work. On the backswing you look pretty good when the club is parallel to the ground in the initial takeaway. But then you have what I call a false shoulder turn. The shoulders effectively stop rotating about your spine and the arms take over. Let the shoulders primarily rotate the arms to the top.

My Clubs
Nicklaus Progressive XC Irons: 3H,4H, 5-GW
Ray Cook SW & Gyro 1 Putter
Taylor Made Burner Driver 10.5
Taylor Made V-Steel 3 & 5 MetalsMy Home Course: Indian RiverMy Blog: Rant-o-Rama-Ding-Dong


Posted
I did a little analysis for you but as always keep in mind this disclaimer:

I know what you're saying about the false shoulder turn. I can see it as well. I've been working on keeping flex in my knee since i went to that golf school because i used to straighten it out almost all the way. Overall i've been good in keeping flex.

But i need to get keep moving my shoulders properly. What can i do to work on that? Also, speaking of your 18 handicap, as long as you're somewhere near me, i'm ok with that. Advice from someone over 25 and most of it goes in one eye and out the other. Any sub 10 HI players have anything to add?
R7 Superquad 10.5* REAX regular flex shaft
FT 5 wood
675XC forged irons 3-PW, True Temper DG SL stiff(S300) shafts
55* BeCu sandwedge
e6+ balls or ProV1
Cougar X-cat putter (odyssey 2-ball rip-off)

Posted
I'm sorry, but i'm going to have to disagree with my spine angle being to tilted at address.

I don't think he's talking about how tilted you are. If you drew a line from your head to your butt, your spine wouldn't be straight (regardless of how much your upper body is tilted). I'm a little sensitive to this issue because I apparently do the same thing. Last time at the range my gf told me "it looks like you're trying to stick your butt way out." My hips, similar to yours, were bent over farther than the rest of my upper body.

I'm not sure if this is good or bad, but since the pros don't do it, I'm trying to stop doing it.

Insight XTD a3 Driver
a3 Hybrids/Irons (3-GW)
SM Vokey 58*
Black Series Putter


Posted
I don't think he's talking about how tilted you are. If you drew a line from your head to your butt, your spine wouldn't be straight (regardless of how much your upper body is tilted). I'm a little sensitive to this issue because I apparently do the same thing. Last time at the range my gf told me "it looks like you're trying to stick your butt way out." My hips, similar to yours, were bent over farther than the rest of my upper body.

ohhhh, that makes sense now. Very interesting.

Does anyone else think the same thing?
R7 Superquad 10.5* REAX regular flex shaft
FT 5 wood
675XC forged irons 3-PW, True Temper DG SL stiff(S300) shafts
55* BeCu sandwedge
e6+ balls or ProV1
Cougar X-cat putter (odyssey 2-ball rip-off)

Posted
I know what you're saying about the false shoulder turn. I can see it as well. I've been working on keeping flex in my knee since i went to that golf school because i used to straighten it out almost all the way. Overall i've been good in keeping flex.

I had that false shoulder turn for many years myself along with a reverse pivot. It is amazing that I was able to hit the ball pretty decent for a long time until it all seemed to catch up to me later in life. The thing that has helped me the most in developing my swing is slow motion drills at home. I cut off a 5 iron to about 24" or a little less, regripped it, and use that sucker to practice my swing. You need to practice in slow motion to get how it feels to make certain motions, to practice what you've been told and feel it in the muscles. So for you, get to that initial takeaway point and stop the arms and bring them up with only a shoulder turn. Get used to the shoulders rotating fully. Keep that spine in place and feel the rotation. You can then take that to the range and work on it in real time.

My Clubs
Nicklaus Progressive XC Irons: 3H,4H, 5-GW
Ray Cook SW & Gyro 1 Putter
Taylor Made Burner Driver 10.5
Taylor Made V-Steel 3 & 5 MetalsMy Home Course: Indian RiverMy Blog: Rant-o-Rama-Ding-Dong


Posted
I had that false shoulder turn for many years myself along with a reverse pivot. It is amazing that I was able to hit the ball pretty decent for a long time until it all seemed to catch up to me later in life. The thing that has helped me the most in developing my swing is slow motion drills at home. I cut off a 5 iron to about 24" or a little less, regripped it, and use that sucker to practice my swing. You need to practice in slow motion to get how it feels to make certain motions, to practice what you've been told and feel it in the muscles. So for you, get to that initial takeaway point and stop the arms and bring them up with only a shoulder turn. Get used to the shoulders rotating fully. Keep that spine in place and feel the rotation.

That's what i usually do, but apparently I'm not following through on that.

anyway, based on some advice in here and from www.swingacademy.com , I really tried concentrating on the shoulder turn and reverse pivot situation today on 9 holes. Feels good. Shot a 45 Someone on swing academy said i was too upright and to focus on alignment with my feet. So, i gave myself a little extra lean, about ~10 degrees it felt like, and it made a big difference. Felt great. Felt easier to get my shoulder turn with focusing on not reverse pivoting. I can definitely work with this and hopefully i'll be able to break a 16 HI!
R7 Superquad 10.5* REAX regular flex shaft
FT 5 wood
675XC forged irons 3-PW, True Temper DG SL stiff(S300) shafts
55* BeCu sandwedge
e6+ balls or ProV1
Cougar X-cat putter (odyssey 2-ball rip-off)

Note: This thread is 6354 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • For someone with a very consistent swing speed and ball strike, upgrades may improve performance. For everyday golfers, probably not. I'm a rather odd player. I usually get best performance from basic pro or tour heads, but with lighter stock shaft from the model's standard driver set up. (Yes, current EXS is an exception.) When I get a full driver fitting, I usually try a couple of modest upgrade  (not super magic) shafts. Most of the time upgrade gives a couple of extra yards, or 10 yards less. Remember this about stock shafts: They are matched to a particular driver model to fit the type of player likely to adopt that model. Also, most OEMs offer a variety of stock shafts in their drivers. Test for which one works best. And, the final decider...  
    • Uh, seeing you're having trouble with hit-and-miss performance from inherited clubs... Get Fitted! IF the 910H pair don't work, swap them out. Also, only two degrees separation in loft is not much. You might consider a 4W (much more reliable than a 3W) plus hybrid. This would give more distance separation than two Hs. For hybrid, get one you can hit... Maybe a more benevolent 4H. Quite often I try to brand match my bridge clubs (FWs and Hs), and my irons and wedges... but not always. Whatever works!
    • Like others have said, get fitted. Since 2011, I have played some combination of 4W + 7W. I had a Cobra 3H and 4H a couple of years back, and would swap out the 7W for a 3H in cold months (keep out of cold wind, and rough thinner for wayward drives.) The 7W matched up with yardage often with 3H; the current 4H goes almost as long as 7W, but has a lower trajectory. 4H also bumped out 4i in last bag redo; I learned to hit stinger with 4H so that's my driving iron on tight holes with shallow landing area. Again, a side-by-side test will tell you which way to go. If 5W or 3H is meh, keep the 7W. Also, are you looking to replace the 7W with a 5W or 3H, or add a second bridge club (5W or 3H) to your bag?
    • Makes sense and aligns with other literature. Static stretching, especially for longer durations, can impede performance in strength and power activities. I would not want to do like hamstring, quad, and calf stretches then go immediately sprint. To me that sounds like a terrible Idea. I would rather start off walking, then jogging, then running, then ramp up to sprinting.  To me, static stretching isn't even a warmup activity. I like the term warmup; you want to get some exertion going before the activity.      a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
    • Going to Florida for the usual February golf trip, and with our current weather, that date won't get here soon enough. Heading to Augusta GA for the Tuesday Master's practice round, will definitely get some golf in while I'm in the area for a few days. Hope to be able to catch up with @coachjimsc if he's around. Then it's back to Scotland first of July.  Playing 7 new courses, can't wait for that.  Then somewhere after that is the Rhode Island CC Member-Guest and then my normal October golf trip to Myrtle Beach.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.