Weights in my Studio Select Newport

[EquipmentJunkie]

In regards to the putter in my sig. I would like to swap out the weights, other than sending the putter to the Cameron Custom Shop, what options do I have? How hard are the weights to change out, is this a probable or smart DIY project?

Also any suggestions of purchase sites would be nice.

Thanks

-Adam

[Klew]

here's your other option:

http://cgi.ebay.com/Weights-Wrench-f...3A1|240%3A1318

[EquipmentJunkie]

Thanks, I did see those I'm just curious as to how they'll mesh since they are not OEM parts.

[obsessedgolfer]

I dont think the un-titliest weights will really make a difference, but if you think they do you could also just buy the wrench from that link, and buy oem weights.

[Dub]

Not sure where you'd find OEM weights.

What is the fee to have The Custom Shop make the change for you???

I've gotta say this....it really seems to me that PING got it right with their new series. You can make some serious adjustments to their new wands.


It's not a big issue for me as I bought the desired weight and length to fit me and don't really have any desire to change it.....scared it'd change the pace and feel too much.

[EquipmentJunkie]

Not sure where you'd find OEM weights.

Only from the custom shop.

What is the fee to have The Custom Shop make the change for you???

It's a bit more than I would like to spend but not out of the question my biggest concern is loosing my putter for a week or two though I have plenty more, they just aren't my gamers.

It's not a big issue for me as I bought the desired weight and length to fit me and don't really have any desire to change it.....scared it'd change the pace and feel too much.

I did to at the time but the game/swing is evolving with lessons, and I'd like to cut the putter down and add some weight as I'm choking down on it a bit much right now, and cutting it will change the swing weight.

I'll probably just give the non OEM parts a shot, I can always put the old ones back in if I want to change the putter. OTOH I could just buy that fastback I want with the proper weighting, someone please talk me out of doing that ;)

[EquipmentJunkie]

Well I traded in some clubs at the local Roger Dunn and walked away with a Squareback for about $50. I still love the SS Newport and I would like to tinker with it so I bought the weights from the link above, except I got the 25g weights. These will replace the 10g weights I have now. I'll let you guys know how they work out.

[doberman]

The weights from the e-bay sight work great. I have a newport where i have a 15g weight in the toe and a 25g weight in the heel. When I putt poorly, I tend to shove the ball. This weight configuration really helps in releasing the putterhead through the ball.

[r7 425]

In regards to the putter in my sig. I would like to swap out the weights, other than sending the putter to the Cameron Custom Shop, what options do I have? How hard are the weights to change out, is this a probable or smart DIY project?

Did you ever think about adding lead tape to the bottom of the club. Its a cheap and effective way of moving weight to the bottom of the club

[EquipmentJunkie]

Did you ever think about adding lead tape to the bottom of the club. Its a cheap and effective way of moving weight to the bottom of the club

Do you realize the amount of lead tape it would take to add 30 grams of weight (in the proper proportion) to a putter? I'm not a club fitter/designer and the amount of tape it take would not only make the putter look garish but likely change the sweet-spot. I like the route I took. Thanks.

[r7 425]

Do you realize the amount of lead tape it would take to add 30 grams of weight (in the proper proportion) to a putter? I'm not a club fitter/designer and the amount of tape it take would not only make the putter look garish but likely change the sweet-spot. I like the route I took. Thanks.

30 grams.. it depends on how the lead tape is applied. If the tape is hammered onto the bottom of the putter head-i see no reason why you couldnt get 30 grams down there. But by adding this weight you are lowering the center of gravity on the roll. For optimal roll- i would suggest adding lead tape to the perimeter of the club. If you are not concerned with asthetics it would work just fine.

[EquipmentJunkie]

30 grams.. it depends on how the lead tape is applied. If the tape is hammered onto the bottom of the putter head-i see no reason why you couldnt get 30 grams down there. But by adding this weight you are lowering the center of gravity on the roll. For optimal roll- i would suggest adding lead tape to the perimeter of the club. If you are not concerned with asthetics it would work just fine.

I am concerned with looks, not obsessed, but hammering lead tape into a $300.00 putter? No thanks. I'm not sure you realize how much 30 grams is either, could I do it, yes....but properly, I don't think so. I don't trust the human eye to add lead tape in the proper proportions, measurements or amount. Since I've already made my decision your suggestions are moot at this point, but thanks.

[r7 425]

I am concerned with looks, not obsessed, but hammering lead tape into a $300.00 putter? No thanks. I'm not sure you realize how much 30 grams is either, could I do it, yes....but properly, I don't think so. I don't trust the human eye to add lead tape in the proper proportions, measurements or amount. Since I've already made my decision your suggestions are moot at this point, but thanks.

No problem- I hammer lead tape onto my vokey design 56..By doing this--i have created a wedge that will dig more- and be prone to sidespin of the ball. With a putter like yours-weight has been distributed around the perimeter--so if you would add 30 grams it would have to covered in tape around the edges. I would not recommend this-but seeing that you have arrived at your decision--it is a very wise one-instead of adding lead tape

[Prodigy]

im just curious how do you like the new squareback (pros cons?)

[EquipmentJunkie]

im just curious how do you like the new squareback (pros cons?)

I've only practiced with it I have not had a twirl with it on the course yet. Having said that it's from the same line as my Newport and it plays just as well, except better....well it feels better, I expect it to play better. That's not to say it's better than my Newport, just better for me, I got fitted this time. It's heavier and an inch shorter. I've also found it a little easier to line up because of the larger flange and slght line. Other than that I don't have much more to say about it yet, it's got the same soft feel and smooth roll as my Newport. I will let you know how it works out if you'd like.

[Prodigy]

I've only practiced with it I have not had a twirl with it on the course yet. Having said that it's from the same line as my Newport and it plays just as well, except better....well it feels better, I expect it to play better. That's not to say it's better than my Newport, just better for me, I got fitted this time. It's heavier and an inch shorter. I've also found it a little easier to line up because of the larger flange and slght line. Other than that I don't have much more to say about it yet, it's got the same soft feel and smooth roll as my Newport. I will let you know how it works out if you'd like.

that would be great man

[EquipmentJunkie]

that would be great man

I've always gone back and forth between large mallets and blades, this seems like a good medium to me - so I'm excited to see how it goes.

[Prodigy]

I've always gone back and forth between large mallets and blades, this seems like a good medium to me - so I'm excited to see how it goes.

yea im hopin to buy one of these soon