Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5655 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
looks like you have a winner with the Slingshot 4D...they are 1.25 inch shorter than standard so they might only last 1 or 2 seasons...but for the money...who cares...go for it.

http://www.golfalot.com/equipment-re...haft-iron.aspx

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star


Posted
looks like you have a winner with the Slingshot 4D...they are 1.25 inch shorter than standard so they might only last 1 or 2 seasons...but for the money...who cares...go for it.

I assume that the heads on these clubs, as well as pretty much any ladies or senior clubs are the same as on men's clubs of the same manufacturer and model, right? So I could always reshaft these later, when he grows, if I so choose?

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003


Posted
I have just been through this with the uk bridgestone rep to ask why none of the manufactures produce teen clubs

they all seem to be missing a gap in the market

my lad has just been fit for nike vr cavity backs and nike are making them for him as our pro is a nike ambasodor

steve

Posted
I assume that the heads on these clubs, as well as pretty much any ladies or senior clubs are the same as on men's clubs of the same manufacturer and model, right? So I could always reshaft these later, when he grows, if I so choose?

The sometimes have different accent colors, but they are the same metal and everything. Make sure to check the lofts though.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
I had ladies clubs when I was younger.
They're shorter than mens clubs and the shafts are more flexy.

No point spending a load of money on clubs if he's just going to grow out of them

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
The sometimes have different accent colors, but they are the same metal and everything. Make sure to check the lofts though.

I guess I was referring more to the size of the head and the weight.

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003


Posted
I guess I was referring more to the size of the head and the weight.

seniors might be the same.

Ladies clubs have a lighter clubhead though

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
seniors might be the same.

I would think so, but how do you know? None of the manufacturer's websites or specs seem to list the clubhead weights.

In My Grom:
Driver: Taylormade R1 10.5°
Fairway: Taylormade RocketBallz Stage 2 Tour 14.5°
Hybrids: Ping G25 3, 4
Irons: Mizuno 5-PW JPX 800 Pro

Wedges: CG-14 50°, 56°, 60°

Putter: Nike Method 003


Posted
I assume that the heads on these clubs, as well as pretty much any ladies or senior clubs are the same as on men's clubs of the same manufacturer and model, right? So I could always reshaft these later, when he grows, if I so choose?

I doesn't really matter, you won't want to re-shaft when he grows out of them. If he picks up the game, put him into a more conventional set at 14 years old. My 15 year old son is playing muscle back irons now (small head), with little offset. This was his 3rd summer playing; when he went to the players irons, his game improved substantially, breaking 100 within 3 rounds (he played 110-115 before that), I would be really surprised if he doesn't brake 90 in the new year.

You can't get good playing with game improvement irons...that's why most of the single digits on this forum are playing "players" irons... Sell this set for $100 bucks in 2 years and start all over...by then you'll be able to customize something more specific to his needs...

In the Bag
 

Cobra Amp Cell Pro Black Tie 7M3 Stiff  |  LS Hybrid Kurokage Stiff  |
 Nickent 4DX KBS Hybrid Stiff 3,4  | Cobra S3 Pro 5-PW Project X 5.5  |
 Scratch 53*, 59*  |  Odyssey Backstryke  |  Srixon Z Star


Posted
I just came across two Nike sets that seem to be aimed at teens:

My son used a set of Nike Eagle junior clubs when he was younger. They were perfect for kids around 5' tall. When he grew to about 5'3", he moved on to a set of ladies clubs. The Nike junior clubs in the links above are likely more current versions of the Eagles.

Note: This thread is 5655 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.