Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5783 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Well, i have not been hitting my driver for a while now and my scores have been coming down...for the most part. I currently have a Cobra 427 SS 10.5 with a regular, high kick shaft. I hit it very high and with way to much spin, sometimes spinning it back on softer fairways. Worst yet, a snap hook is a very real possibility every time i tee it up. (I read somewhere that the 427 is set with a closed clubface.) So i got tired of it and decided to go see what else is out there.

I tried alot of drivers, price range of $300 MAX. and wanted something lower launching and lower spinning. After hitting a bunch, the pro doing the fitting had me a FT-9 tour with a stiff shaft and 8.5* loft. I was still launching it 11-12 degrees and my spin rate was 1800 rpm. Is there Anything wrong with that. My carry distance was still good. not great. but good. like 250.

I plan on going back this week to try the ft-9 tour in other lofts and shafts but i thought i would just ask here for maybe some insight or info. also, reviews from people with this club would be nice. I hit the ft-9 straighter than any of the other drivers which was my most important requirement. Next was lowering my ball flight and spin, i just don't know if that was a little too low.

Posted
I'm a big fan of this driver. I switched from the Mizuno Mp-600 in an effort to lower my launch and spin.

I don't have any launch monitor data for you, but it is easily the most forgiving driver I've ever owned. I hit drives all over the face my last round - heel, toe, dead center - my gps yardages ranged from 240-270 yards. The 240 was horribly struck - thin and off the heel - but still managed to get down a respectable distance and find the fairway. The 270 was struck almost perfectly. All the rest were between 255 and 265 and on those impact varied from about 1 ball width toward the heel to about 1 ball width toward the toe.

As for launch and spin, all I can say is that it definitely spins less than than the MP-600 and launches lower. With my 9.5 it almost rolls out more than I'd like. I've been thinking of getting a slightly spinnier shaft to see if I can increase carry and reduce roll. Launch with my shaft is a solid medium, where my MP-600 was medium-high to high. I really like it's ball flight...I'm yet to balloon a shot and that used to be a pretty big problem for me. Really solid in the wind as well.
Callaway FT-9 Tour I-mix 9.5° Driver (Fujikura Zcom Pro 65 stiff)
Mizuno F-50 15° 3w (Exsar FS2 stiff)
Bridgestone J36 19° Hybrid (Aldila VS Proto 80 stiff)
Adams Idea Pro 23° Hybrid (Aldila VS Proto 80 stiff)
Adams Idea Pro Forged 5-pw Irons (DG Black Gold stiff)Nike SV Tour Black Satin...

Posted
i really hate my driver. its accurate and all, but if you hit the ball strait anyway who cares what driver you hit because your going to bring the club through square. thats why i dont like this driver. you can hit any driver strait and this driver will go strait but 30 yards shorter than the competition and if you miss hit it (like off the toe or heel) its going to go like half the distance (no exaggeration it will be 150 yards shorter than a good hit) when on other drivers you can get away with a miss hit.
if you do end up with an i-mix and need a shaft let me know because im getting rid of my whole set up there

|callaway.gif X460 Tour Fujikura Tour Platform 26.3 73g | taylormade.gif 2i Rescue 11 |  3i HiBore Hybrid |  710 MB |  Wedge Works 48/06 |  cg12 52/08  | vokey.gifSpin Milled 56/11 | nike.gifSV Tour 60/10 | cameron.gif Studio Select Newport 2 34" |

 

rangefinder : LR550


Posted
i hit this club a few times and hated it

Driver: S2 9.5 Stiff
3 Wood: Ft Stiff
5 Wood: Ft-iz Stiff
Irons: VR Full cavity 4-Aw
Wedges: Spin Milled 56* and CG11 60*Putter: Rossa CorzinaBall: ProV1 or Tour i


Note: This thread is 5783 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.