Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5706 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted




These are the things I'm working on:

1. This season, I've been dipping down a lot by taking deep divots, hitting behind the ball.
2. Consistent contact
3. Keep my hands in front of the ball on contact (instead of "scooping")
4. Cure my "casting" or out-to-in swing which results in either pulling way left, or a slice.
5. Basics (posture, shoulder turn, set-up)

Any help would be appreciated.

Thanks!

Driver: Titleist 905R with Aldila NV stiff
3 Wood: Titleist 909f2 w/ Aldila Voodoo stiff
Hybrid: Taylor Made Rescue Club 19*
4-PW: Titleist 695cb
GW (50 degree): Titleist Oil Can Vokey 250SW (54 degree): Titleist Vokey Oil Can Spin MilledLW (58 degree): Titleist Vokey Spin MilledPutter: Scotty...


  • Administrator
Posted

I'm going to go ahead and guess that you heard "keep your chin up" at some point.... yes?

Good swing overall. Would be better if you weren't looking through your bottom eyelashes to see the ball.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted
I'm going to go ahead and guess that you heard "keep your chin up" at some point.... yes?

LOL, that's the first thing I thought: he must have read an article "Keep Your Chin Up For More Distance".

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry


Posted
Thanks. This video was after a few adjustments I made from watching my first video of this practice session. I was hunched over, my chin was in my chest, and my hands were far from my body. This was the result. I might've exaggerated the fixes too much, but this video was the result. I also want to get my club to stay on plane in my back swing to get rid of my casting.

Thanks for the comments!

Driver: Titleist 905R with Aldila NV stiff
3 Wood: Titleist 909f2 w/ Aldila Voodoo stiff
Hybrid: Taylor Made Rescue Club 19*
4-PW: Titleist 695cb
GW (50 degree): Titleist Oil Can Vokey 250SW (54 degree): Titleist Vokey Oil Can Spin MilledLW (58 degree): Titleist Vokey Spin MilledPutter: Scotty...


Posted
You have the makings of a good swing. Understand what you meant about exaggerating the fixes. Now, just find some place in the midlle. Relax your arms, head and shoulders a little to get a more athletic at setup. Try to feel like a baseball outfielder, poised for action.

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry


Posted
Are there any drills that I can do to stop my club head from flailing back causing it to point to the right of the target at the top of my swing?

Driver: Titleist 905R with Aldila NV stiff
3 Wood: Titleist 909f2 w/ Aldila Voodoo stiff
Hybrid: Taylor Made Rescue Club 19*
4-PW: Titleist 695cb
GW (50 degree): Titleist Oil Can Vokey 250SW (54 degree): Titleist Vokey Oil Can Spin MilledLW (58 degree): Titleist Vokey Spin MilledPutter: Scotty...


Posted
Are there any drills that I can do to stop my club head from flailing back causing it to point to the right of the target at the top of my swing?

I'm no "drill" expert, but you have to fix the buckling of your arms at the top of the swing. You're over-swinging by bending both arms, and you're really folding up that right arm. Try feeling like you're not swinging your arms; that you're keeping them both extended out from your shoulders like your setup position, and just turning your shoulders to make the swing. Also, try feeling like your hands are staying extended as far away from your body as possible during the backswing, and not collapsing in. When your arms swing more than your shoulders turn, the handle of the club is getting closer to you. Push it away, backward away from the target. This will stop your arms from "taking over" the backswing from your shoulders. And it should put your elbows in a better position at the top. And that should put your club in a better position at the top. And overall, it'll be a shorter swing, meaning more consistent ball contact.

-Andrew

Posted
Are there any drills that I can do to stop my club head from flailing back causing it to point to the right of the target at the top of my swing?

Just practice making half swings to the point where you feel your left arm is fully extended and straight and your hands are as far away from your head as they can be.

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry


Note: This thread is 5706 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.