Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5383 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hello everyone! First of all, i'm new on this forum, but I've been reading a lot recently. So as the title says, I want to purchase some new clubs, and I've been interested in clones clubs (I don't want to start a debate about should I or not buy clones, I made up my mind), so I can change my old wood clubs and 1970's something irons. I shoot about 100 each round, but I want to break that next season. So couple of questions for you : 1) Which clone irons - woods would you recommand for the type of player that I am ?? (I'm a lefty BTW, so I'm limited in terme of choices) 2) which website would you recommant the most (Gigagolf, Pinemeadow, Diamondtour, etc..) ?? 3) What king of grip do you recommand if I tell you my palms sweat a little, and that I don't play with glove ?? 4) Are the stock shafts on these websites are any good or you recommand something else ?? thanks for your time Once again, I Know I could buy used clubs, but I like the fact that I can customize the clones clubs! and they're CHEAP! Yan

Posted

I played Pinemeadow clubs for a couple years and they honestly were pretty decent clubs for what I paid for them.  I got a bag and a full set of clubs for $300, which nowdays is a steal.

Another option would be to go to Target, Walmart or a sporting goods store and buy a set of Top-Flite or a cheap set of Wilsons.  You can usually get them for $300-$400 and get a good starter set.

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted
I played my friend's top flite that he bought from Costco, but I don't like them so much! How about the Acer XF from Hireko?? I believe they're based on the new callaways Razr, am I wrong?!

Posted

I play GigaGolf Cavity backs for my 4, 5, and 6 irons.  I also use a GigaGolf Putter and Wedge.

GigaGolf is coming out with some new designs and branding this spring.  They are trying for a more unique and individualized look to their clubs.

GXz Ti Driver

TRX v11


Posted

Diamond Tour Golf has good products. I have used them over the years and their products are well made. DTG customer service people are knowledgeable and will be able to help you.

http://www.diamondtour.com/

If you call them --Jeff Bushnell

Sales Manager

800-826-5340  ext 201

Wishon  715 CLC-AXE5 A shaft -hard steppedt -44.5"
4 wood-Infiniti 17*-UST IROD A shaft-Hard stepped(2009 model)
Hybrids 19* & 24*-Trident DSW-UST IROD Hybrid A shaft-hard stepped (2009 model)
Irons-5-PW- Wilson Staff Progressive Forged-TT Release  sensicore( 5&6-Soft stepped R-7,8&9-R-wedge hard stepped R
Wedges-52*-Wilson JP BeCE(54* bent to 52*)-TT-Release sensicore-hard stepped R

              56*Wilson R-61 BECU Sandy Andy- Release sensicore tipped same as 8 iron

               60* Wilson Harmonized BECU-Release sensicore tipped same as 8 iron

Woods- Star Grips  Irons Energy Grips

:Putter-Rife IBF with Ping Blackout Grip-35"

Ball-Wilson Staff Zip Golf. or C-25


Posted

one of my playing partners just got some clones for 200 total including shafts and grips. through a catalog, golf world or something like that. today was the first time I saw them, but he has played them for a few rounds so far and likes them a lot. and he gained a few yards.

golf is a lot like life. the more you enjoy it, the better off you are. a3_biggrin.gif
 
 


Posted
how about checking out the full sets made by PowerBilt? They are available on eBay and are not expensive. I got a set for a friend of mine last year and he absolutely loves them.....bag, irons driver, hybrid and putter for $180......

Posted

And to answer your grip question, I would always recommend an interlock grip. I feel like your control over the club is unmatched over a 10 finger grip. There are multiple interlock grips. As long as you are comfortable interlocking (and even if you're not, give it a shot!). golf-grip.jpg

titleist.gif 910 D2 10.5 -- Diamana A'hina X
titleist.gif 909 F3 15.0 --  Matrix Ozik X-Con
titleist.gif 910 CB 4-PW -- Project X 6.0
cleveland.gif CG10 52, 56, 60.
cameron.gif   Studio Design 1.0   titleist.gif Pro V1    c2_beer.gif It's a Wisconsin thing.

Posted

Another vote for Gigagolf. I love my set, only my putter is not from them.

As for grips take a look at what the sites offer then go to a dicks/golf galaxy or someplace and try them for youself. Get what is comfortable.

I have the stock true temper steel shafts that Giga offers with the irons and am happy with them. I did upgrade the wood shafts.


Posted

my first set of clubs were clones

I would never buy clones ever again

taylormade.gif - Taylor Made R11 Driver, 9*
taylormade.gif - Burner 2.0" 4-AW Steel
vokey.gif - Vokey 56*, 60*, 64*
odyssey.gif - Odyssey ProType PT 82

titleist.gif - Pro-V1  taylormade.gif - TMX Stand Bag

Posted


Originally Posted by lastexit00

I played my friend's top flite that he bought from Costco, but I don't like them so much!



Originally Posted by q7w

my first set of clubs were clones

I would never buy clones ever again

Typically most new players cant tell the difference from cheap clones to top of the line clubs and for $200-$300 you cant expect much.


Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S


Posted

I purchased wedges from gigagolf and like them alot.

IN THE Nova BAG:
Cleveland Launcher, 10.5, ALDILA VS Prototype 60g S flex
Adams Fast10 3w
Cleveland Mashie M3 hybrid 20.5 S flex 
Ping G5 4-PWSGS 52, 58, 62Ping iwi anser 34"Bridgestone B330-RXS


Posted

A word of caution to the OP:

There isn't anything wrong with learning on clones, and you're right, it does provide you the chance to get new custom clubs for a relatively cheap price ($200 - $300).  A set that fits you will be much better than a set that doesn't.

Here is the caveat:  the price for clones can climb if you want a good quality grip and shaft... and you want good quality here.  They are the most important parts of the golf club.  For instance, adding a Golf Pride grip and Dynamic Gold shaft to a set of irons from Giga Golf tacks on well over $100 onto the build price.  Now we are looking at a set that is nearing $300.

What if the 2* flat set from a clone company doesn't fit you in a year or after a few lessons?  Most club makers would hesitate to bend a lesser-quality cast club, even a few degrees.  What if the cheap shafts that you opted (instead of the dynamic golds) for aren't right?  Expect to pay $150 for a new set from your local club maker.

What if it's time to move onto something else?  A used set of Titleist, Callaway, Taylormade or other clubs that you purchased for $200 will still be worth nearly as much.  You'll be able to sell these quickly, because people want affordable, quality clubs.  The $300 clones that are bent to fit you will sit in the buy/sell/trade forum at $75 for months on end.

Again, there is nothing wrong with starting on a set of clones.  However, the 'value' you perceive now may shift in a few short months.

Ask Nuck81, he bought a full set of Giga Golf clubs that came with fishing poles for shafts, and less than a year later he's using 3 of the 8 he bought.

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted


Originally Posted by delav

. . . Ask Nuck81, he bought a full set of Giga Golf clubs that came with fishing poles for shafts, and less than a year later he's using 3 of the 8 he bought.



Are you suggesting he's a clone club ho?

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.


Posted


Originally Posted by sean_miller

Are you suggesting he's a clone club ho?


I don't know of the extent of his club fidelities, or lack thereof.  I'll let him reply here.  Hopefully he hasn't spent too much time with Enis.

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted

I don't know if I should be flattered or pissed?

For what it's worth out of the 12 clubs in my bag, my putter, 56* wedge, 4, 5, 6, iron are GigaGolf.  my 7-pw are Titleist 990's that used to be my dad's.  My dad passed away and I just like to use them cause they were his, and to be honest I probably hit the GigaGolf Cavity Backs a little better, but I love my Poppa so it is what it is.

The only clubs I have bought from GigaGolf I didn't like where the Hybrids.  And it's not cause they are bad quality or anything, it's just I like hitting a 5 and 4 iron better than a 6 and 5 hybrid.

And the Shafts are all TruTemper Feather Flight Premiums on my clubs, and I payed another $2 per club to get Golf Pride Tour Velvet Grips...


Posted

to the op, i have a set of lefty callaway ft irons, 2 x forged wedges 56,60 and an older cleveland 52 degree wedge that i would let go for 325.00..cally were 999.00 brand new and i have treated them well..also have winn pci grips on them. just a thought.


Note: This thread is 5383 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.