Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5414 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

hey everyone!

Recently decided to drop the callaway 3 and 5 wood for a 4 wood.  I like the G15 and the Superfast 2.0.

Didn't like the white crown on the TM at first, but it's a non-issue for me now.  So really it just comes down to forgiveness and what's going to be more versitile.

I love my current 3 wood of the tee.  But seems like I'm 50/50 on making good contact off the fairway (i think it's because it is so damn big and hard to get at the ball unless it is sitting up on the fairway and sitting on a flat piece of turf).  I also love my current 5 wood off the fairway and even sometime out of the light rough. I think it is due to the sole design.  But distance between the two clubs seems to be pretty even, unless I make good contact with the 3 wood.   So....i came up with the idea to split the difference and get a 4 wood.


So...the most important thing for me is something that is going to be forgiving and allow me to make good contact...

Thoughts between the two models??

What I Play:

Driver: R9 460
4 Wood: G15

Hy: Callaway FT 3Hy

Irons: AP1 4-PW

Wedges: Vokey 52* & 60*, Mizuno MP-T 10 58*

Putter: Newport Studio Select 2.7

Ball: Nike One Vapor


Posted

You should try to hit them somewhere, for sure.  I recently replaced my fairway woods and tried out a bunch.  The two you mention were my final two choices.  The TM was a beast off the tee, I was really crushing it.  However, I had no luck hitting it from the ground.  I ended up with not only the G15 4wood but the 7wood as well.  Great clubs, that really work for me.


Posted

Thanks, Rasky.  I found the same thing.  I bought the TM because I liked the feel of it in the store.  Took it to the range and had the same experience.  just couldn't get at it on the ground, and when I did....felt like ball dispersion was pretty erratic.  When solid contact was made....it was LONG.  But i just didn't like the inconsistent dispersion (both left to right, and high-low trajectory).   I think this could have been due to the VERY closed club face position of the club.  Never liked that.

So...I returned and got the G15 yesterday. Took it to the range last night and BINGO....this is my club.  Love everything about it.  Long, forgiving, "traditional" looking at address, consist ant ball flight.  Great club.  I think I'll be very happy with it!

What I Play:

Driver: R9 460
4 Wood: G15

Hy: Callaway FT 3Hy

Irons: AP1 4-PW

Wedges: Vokey 52* & 60*, Mizuno MP-T 10 58*

Putter: Newport Studio Select 2.7

Ball: Nike One Vapor


Posted

Some of the problem with the TM woods maybe because the stock shafts are 3/4"-1" longer than most other brands. The extra length gives the little extra distance off the tee, but could also be causing the problems off the turf.

Just a thought


Posted

I absolutely love my G15 4 wood.  It's a monster off the tee and a beast off the deck.  My stock shot is a push-draw but I find I can hit a fade with little difficulty as well.  I always had trouble with my fairway woods (Diablo 3 and 5) until I tried the G15.

Brad


Posted

Yep, G15 4 wood is amazing.  If I can't hit a fairway wood off the deck, which was the case for me all the time with fairway woods prior to the G15, it's useless to me.  Only cause I can't leave well enough alone, I've been trying out a K15 3 wood as an alternative to the G15 4 wood, but I can't decide which one I like better.  K15 is longer off the tee, but I don't seem to hit it as consistently as the G15 4 wood.  Both are outstanding clubs though, and I really don't need to try out other fairway woods for a good long while.

Equipment:
Ping K15 Driver (10.5º) - Diamana BB R flex; Ping G15 4 Wood (TFC R flex); Ping G15 20* Hybrid (TFC R flex); Ping G15 23* and 27* Hybrids (AWT R flex steel); Ping G15 Irons 6-GW (AWT R flex steel); Ping I-Wedge 54* Wedge; CG14 BP 58* Wedge; Odyssey Black Series Tour Designs #9 Putter


Posted

Haven't hit the Superfast so I can't comment on that but here's my thoughts on the G15 (which I love!): http://thesandtrap.com/b/clubs/ping_g15_fairway_wood_review

Alan Olson

Follow The Sand Trap on Twitter!
Check out our Facebook page!

Awards, Achievements, and Accolades

Note: This thread is 5414 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
    • Day 56 (4 May 26) - Worked on some ball-then-ground drills - going from P3 thru impact - with a slowed tempo, working to keep all parts in sync.   
    • Wordle 1,780 3/6 🟩⬜🟨🟨🟨 ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,780 4/6 🟨⬜⬜⬜🟨 ⬜🟨🟨🟨⬜ 🟩🟨🟩🟨⬜ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.