Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

I need to get more loft on my shots


Note: This thread is 5384 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Its not a problem with irons, but with my fairway woods and my driver, a lot of times I hit the ball and get no loft. It will go straight down but role a while. However, sometimes, I hit it with a good amount of loft. I want to know how to get more loft on my shot. Thanks.


Posted

Hard to tell but make sure you're sweeping the ball (catching it on a slight upswing) as opposed to hittting down on the ball like you do an iron

Age:19

What's in my bag?
Driver- Taylormade TP Burner 2.0 5 wood- Launcher (4-GW)- Jpx Pro 800 SW- X Forged LW- 588 X Wedge- Tp-Z Putter- Unitized Tiempo

 

"Hard work beats talent"-Tim Tebow


Posted

Normally, when i want a high lofted shot, i'll move the ball more forward in my stance, (closer to your left heel if your a right handed golfer) and make my club SWEEP at the ball, not hit down on it.

Driver:  R9 SuperTri 10.5*

Fairway:  R7 3wood 13*

Hybrid:  Super Hybrid 17*

Irons: CG Reds

Wedges: Vr 52* 56* 

Putter: Studio Select Newport 2.5 midslant

Ball: e6


Posted


Originally Posted by tmf9

Hard to tell but make sure you're sweeping the ball (catching it on a slight upswing) as opposed to hittting down on the ball like you do an iron


Is this different for every swing? I am actually hitting down on my driver at impact. Not as much as with an iron, but right at impact I am hitting down...


Posted
Hit more through the ball, maybe move it farther back in your stance. May sound weird, since it more likely will take off more loft, but it may help you hit through the ball. You could be hitting it ever so slightly thin, hitting more down on the ball could help. This works for me at least. When my shots go low and die quick, I am hanging back with the hips, not getting enough umph with the hands through the ball or something like that. Moving the ball back or making sure I hit through the ball gets it into the air. Lack of lateral movement with the hips maybe, or head doing something weird. With the driver, you may be hitting too much down on the ball, which could be a result of the head moving forward. All in all hard to tell. Ask someone else to hit your clubs and compare the trajectory. If if is higher when others hit it, see if you can spot differences in ball position, divot etc.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Awards, Achievements, and Accolades

Posted

with a driver, you want to sweep the ball, if your hitting down on the ball, you'll loose some distance

Driver:  R9 SuperTri 10.5*

Fairway:  R7 3wood 13*

Hybrid:  Super Hybrid 17*

Irons: CG Reds

Wedges: Vr 52* 56* 

Putter: Studio Select Newport 2.5 midslant

Ball: e6


Posted


Originally Posted by CuppedTin

Is this different for every swing? I am actually hitting down on my driver at impact. Not as much as with an iron, but right at impact I am hitting down...


I have always been taught that you sweep the ball with woods, catching it on a slight upswing

Age:19

What's in my bag?
Driver- Taylormade TP Burner 2.0 5 wood- Launcher (4-GW)- Jpx Pro 800 SW- X Forged LW- 588 X Wedge- Tp-Z Putter- Unitized Tiempo

 

"Hard work beats talent"-Tim Tebow


Posted

Ball forward head back 4 or so inches weight on back leg.

Fixed every driver issue i have ever had.


Posted


Originally Posted by CuppedTin

Is this different for every swing? I am actually hitting down on my driver at impact. Not as much as with an iron, but right at impact I am hitting down...

Also PGA professionals hit down with driver. LPGA is different story.


Note: This thread is 5384 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.