Jump to content
IGNORED

Putter Update...

SuaSponteMn
 Share
Note: This thread is 6221 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

SuaSponteMn Dedicated Member

SuaSponteMn

I got this back a while ago, but I've been swamped with work and other things so I was never really able to provide an update, until recently. I received an old Scotty Newport in Oilcan finish as an Xmas gift from my wife, it was purchased with the intent of me sending it to the custom shop for refurbishing. I'm really pleased with the end result, but the problem is it's almost too pretty to game, so it hasn't seen the bag yet.

Maybe this Wednesday at the Refuge Golf Club with BigAl as I battle the Wisconsin propaganda machine? We'll see...

Before:

After:


Before:

After:


Before:

After:

In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot
Link to comment
Share on other sites

Thrdroc Well Established Member

Thrdroc

Wow they did a really good job with that. Looks better than new.

Driver: 9.5* SQ Sumo Stiff
3W: 15* SQ Stiff
Irons: 3-PW R7 Stiff Flex
GW: X Tour Vintage 52 11 bounce
SW: X Tour Vintage 56 13 bounceLW: X Tour Vintage 60 8 BouncePutter: Monza CorzaBall: HX Tour 56

Link to comment
Share on other sites

sandtrap Well Established Member

sandtrap

use it man. It's beautiful put it to work and make sure you use the head cover.

In My Bag: This week
Driver: Nike square Sumo 10.5
4-Wood: Nike square Sumo 14.5
7 wood Cleveland launcher,
5 utility 19* clevelandIrons: 4-7 Titleist 690mb 8-pw Mizuno MP 33Wedges: Gauge Design GAS II 52* and 58* Putter: Scotty Cameron TE 10 2.5TP Mills or Cameron's or Bettinardi's. let me...

Link to comment
Share on other sites

Mr. Sparkle Established Member

Mr. Sparkle

Game it. I just got one back from the studio and it looks perfect, but I have to game it. At worst, I send it back again.
In my bag
Driver: Burner 460 9.5°
Fairway: V-Steel 15°
Utility: Rescue Dual 16°, 22°
Irons: 755 (5-PW)Wedges: Vokey 50°, SM 56°, SM 64°Putter: Newport 2 Pro PlatinumBall: ProV1
Link to comment
Share on other sites

BigAl5150 Dedicated Member

BigAl5150

Maybe this Wednesday at the Refuge Golf Club with BigAl as I battle the Wisconsin propaganda machine? We'll see...

Beats listening to you talk about ND's great record against the Army, Navy and the Air Force Academy...

BTW, why is your putter facing the wrong way?

Alan Olson

Follow The Sand Trap on Twitter!
Check out our Facebook page!

Link to comment
Share on other sites
Awards, Achievements, and Accolades
1

SuaSponteMn Dedicated Member

SuaSponteMn

  • Author
Beats listening to you talk about ND's great record against the Army, Navy and the Air Force Academy...

Shhh, you're going to wake up the echo's...

In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot
Link to comment
Share on other sites

Matt P Well Established Member

Matt P

Beats listening to you talk about ND's great record against the Army, Navy and the Air Force Academy...

You forgot the Coast Guard and this year's homecoming oponent, the Boy Scouts!!!

Shhh, you're going to wake up the echo's...

What echos...oh you mean Ron Powlus' echos for Jimmy Clausen....

Back to golf..You gotta play the Cameron. I purchased one on e-bay with the intent on sending it into the custom shop, but I needed to use it this weekend as a friend borrowed my tri-ball for a weekend competition (he and his friends version of the Ryder Cup--3 days of team play 8 vs. 8). It was a great putter, and now I am looking forward to sending it in to get re-finished over the winter, however, I am having second thoughts about having it shortened by an inch as I thought it swung great. What options did you select when you got yours refinished, I see you got your name stamped on it and looks like you choose the original finish, what else?

In my Grom:
Driver: :nike: Sasquatch 9.5° Graffalloy Shaft-Stiff Flex
FW: :nike: 3 (15°) & 5 (19°) Sasquatch Diamana Shaft-Stiff Flex
Hybrid: :touredge: Tour Edge Exotics Ironwood 21° Adila Shaft-Stiff Flex
Irons: :nike: 4-AW OSS Steel Shaft-Stiff Flex
Wedges: :vokey: Vokey Spin Milled 54 and 60
Putter:  :edel: Basic Series 

Link to comment
Share on other sites

titleistglfer Member

titleistglfer

about how much does it run to have one refinished? I realize it would vary depending on the options you choose, but roughly? anyone?

In my bag:
Driver: 905T 10.5 YS-6 Regular Flex
3 wood: r7 steel 15 degree stiff
Hybrid: Rescue Mid 19 degree stiff
Irons: 735.CM 4-PWedges: 52, 56, 60 vokey oil canPutter: 2ball white steelBall: Pro V1Home Course: http://www.millcreekgolf.com

Link to comment
Share on other sites

Matt P Well Established Member

Matt P

about how much does it run to have one refinished? I realize it would vary depending on the options you choose, but roughly? anyone?

Scotty's website lists the cost for the available options, you just have to go to the custom shop portion of the site.

In my Grom:
Driver: :nike: Sasquatch 9.5° Graffalloy Shaft-Stiff Flex
FW: :nike: 3 (15°) & 5 (19°) Sasquatch Diamana Shaft-Stiff Flex
Hybrid: :touredge: Tour Edge Exotics Ironwood 21° Adila Shaft-Stiff Flex
Irons: :nike: 4-AW OSS Steel Shaft-Stiff Flex
Wedges: :vokey: Vokey Spin Milled 54 and 60
Putter:  :edel: Basic Series 

Link to comment
Share on other sites

i-Guy Dedicated Member

i-Guy

SuaSponteMn ,

Wow! The looks awesome!!!

I am thinking about sending mine in to have my initials added and a new grip etc..

Someone also asked about getting this done. Check it out at http://www.scottycameron.com/customization/default.asp

TEE - XCG6, 13º, Matrix Ozik HD6.1, stiff
Wilson Staff - Ci11, 3-SW, TX Fligthed, stiff

Odyssey - Metal X #7, 35in

Wilson Staff - FG Tour ball 

Link to comment
Share on other sites

SuaSponteMn Dedicated Member

SuaSponteMn

  • Author
What options did you select when you got yours refinished, I see you got your name stamped on it and looks like you choose the original finish, what else?

Love em or hate em, everyone's thinking about the Irish!!

The options I selected were: Original Finish (I asked for 3x oilcan but got shot down) Custom Shop Stamp (They forgot it, but refunded my $$) Name stamped on toe Sight dot Custom Shop grip in navy Custom Shop headcover in navy Restored to original loft, length and lie Total price was 315.00 plus shipping, less 35.00 refund for the missing stamp. I know, that's complicated math for a Michigan guy, so I'll provide the answer at the bottom of the post, don't cheat though, at least try the subtraction. (joking of course, it's just healthy college rivalry) a) $280.00
In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot
Link to comment
Share on other sites

Matt P Well Established Member

Matt P

Addition and his tricky partner subtraction....always baffeling, did you have to put on the green jersey to think of that one .

Did you get the sight dot or sight line, from the pictures it looks like the sight line. Did you get a chance to use it before you sent it in to the custom shop. How did it play, also once you get a chance to use it, tells us how you like it and how it plays.

While any ND fans knows how to polish his dome, you may want to visit some of the Cameron sites and forums for suggestions on care and cleaning as I have herad the oil cans can get oxidation pretty quickly. Great looking putter though...too bad about the custom stamp, where were you going to get it?

In my Grom:
Driver: :nike: Sasquatch 9.5° Graffalloy Shaft-Stiff Flex
FW: :nike: 3 (15°) & 5 (19°) Sasquatch Diamana Shaft-Stiff Flex
Hybrid: :touredge: Tour Edge Exotics Ironwood 21° Adila Shaft-Stiff Flex
Irons: :nike: 4-AW OSS Steel Shaft-Stiff Flex
Wedges: :vokey: Vokey Spin Milled 54 and 60
Putter:  :edel: Basic Series 

Link to comment
Share on other sites

The Rambler Dedicated Member

The Rambler

i bought a Futura with the intent of having it refurbished but because it's made of Aluminum they can't do it (stupid environmental freaks and their laws )
but its a good putter none the less

Driver: 10.5* SuperQuad TP 1st Edition All Black V2 Stiff
5 Wood - 585.h 19* DG S300
Irons: 3-PW S59 Stiff
Wedges: Rac TP 52*, 60* MP-T 56*
Putter(s): Anser 3 TP Black ballGET TO SINGLE DIGITS!Goal: Beat a certain admin that lives in my town

Link to comment
Share on other sites

SuaSponteMn Dedicated Member

SuaSponteMn

  • Author
Addition and his tricky partner subtraction....always baffeling, did you have to put on the green jersey to think of that one

This post is funny... Seriously, it made me laugh.

I'm attaching the pic from above, I putted a bit with it before but you could tell someone had leaned on it pretty hard, or just plain bent it, so it was pretty far off IMO. Straight as an arrow now... Oh, and the dot lines up, it's just that the picture was taken at an angle
In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot
Link to comment
Share on other sites

Matt P Well Established Member

Matt P

Do you like having both the dot and the site line, I am considering getting both.

In my Grom:
Driver: :nike: Sasquatch 9.5° Graffalloy Shaft-Stiff Flex
FW: :nike: 3 (15°) & 5 (19°) Sasquatch Diamana Shaft-Stiff Flex
Hybrid: :touredge: Tour Edge Exotics Ironwood 21° Adila Shaft-Stiff Flex
Irons: :nike: 4-AW OSS Steel Shaft-Stiff Flex
Wedges: :vokey: Vokey Spin Milled 54 and 60
Putter:  :edel: Basic Series 

Link to comment
Share on other sites

SuaSponteMn Dedicated Member

SuaSponteMn

  • Author
Do you like having both the dot and the site line, I am considering getting both.

Honestly, I thought it would be the one thing that would make me fall in love with with over my studio style. In reality, it's nice, but I could take it or leave it...

In My Bag:

Taylormade: Superquad 9.5 Aldila VS Proto 'By You' 70-S
Sonartec: SS-07 14.0 Aldila NV 85-S
Cleveland: Halo, 3i UST Irod 83-SPing: i-10 4-UW AWT-STitleist: Vokey Design Spin Milled 54.10 & 60.08Slighter: Handstamped Tacoma, 350G in Black Satin w/Sound Slot
Link to comment
Share on other sites

Matt P Well Established Member

Matt P

Thanks for the pics, I think I am going to go with a refinish, replace shaft, burgandy leather grip, replace cover (or get black art of putting cover) and certification. I also would like to get a top site line and two site lines on the flange. I am still on the fence about the custom stamp.

In my Grom:
Driver: :nike: Sasquatch 9.5° Graffalloy Shaft-Stiff Flex
FW: :nike: 3 (15°) & 5 (19°) Sasquatch Diamana Shaft-Stiff Flex
Hybrid: :touredge: Tour Edge Exotics Ironwood 21° Adila Shaft-Stiff Flex
Irons: :nike: 4-AW OSS Steel Shaft-Stiff Flex
Wedges: :vokey: Vokey Spin Milled 54 and 60
Putter:  :edel: Basic Series 

Link to comment
Share on other sites

Note: This thread is 6221 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.

  • Posts

    • mchepp
      Are You a Fair Weather or All Weather Golfer?

      By mchepp ·

      When I lived in Oregon my friend had a rule. It could only be 2 of the following 3 items for us to play. If all 3 we’d skip.    1. Windy (20+) 2. Rainy (needs to be steady, rain in Oregon is pretty common) 3. Cold (less than a high of 50) This was a pretty solid rule.    
    • Darkfrog
      "5 Minutes Daily" Practice Challenge

      By Darkfrog ·

      Day 74: Worked on priority piece, full swing for about an hour this evening after dinner. Really need to exaggerate “hitting to right field feel” more than I think to produce slight push draw ball flight. 
    • DaHolla
      "5 Minutes Daily" Practice Challenge

      By DaHolla ·

      Day 170 - Got some good work in on the short game, as well as more work on my priority piece. 
    • mchepp
      Cobra 3D Printed Irons

      By mchepp ·

      I searched around but didn’t see any other threads on this so I’ll put it here. I work in the laser industry and one of the applications has been additive manufacturing. The main market for the past 10 years has been SpaceX and the space industry and some medical applications. The new one I saw this week is 3D printing irons. Cobra and the company that they are using is marketing these irons pretty aggressively.  In talking with the folks in the booth at the trade show, the claim is that they can gain strength but reduce the weight to put it exactly where they want. The print of the iron is very cool. Mostly everything behind the face is a thin metal lattice and then in the heal and toe is a block of tungsten for weight.  I am old enough to remember the arguments about forged versus cast irons. I wonder if folks here will pay a bit more to get 3D printed irons.  They have a booth here where you can hit them but I hate lines and the line to do it is always long. I go again tomorrow, and if the line isn’t too long I’ll give it a try and report back.    Here are some pictures (I had some trouble uploading, I’ll try later)      
    • StuM
      Are You a Fair Weather or All Weather Golfer?

      By StuM ·

      OPPs, meant to quote @colin007
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept
The popup will be closed in 10 seconds...