Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6686 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

LOL!

Umm...okay. How long have you been playing golf? The fat and thin shots are in the same family and caused by many factors. So I suggest you to get more intensive golf lesson. But I have a hunch that you don't release your club at the right time. Either too early (chunk) or not at all (topping). It's all about timing. By the way, I believe fat and thin shots are irrelevant to improper club fitting.
What's in the bag:
Driver: r7 SuperQuad 10.5° ~ UST Proforce V2 65g Regular
Wood: 906F4 18.5° ~ Aldila VS Proto 80g Stiff
Irons: MP-60 3-PW ~ True Temper Tour Concept S3
Wedges: Vokey Oil Can 252.08, SM56.10 & SM60.08Putter: Marxman Mallet 33"

Posted
its wierd - when i was in the simulator last week i could hit ever shot awesome with my 3 wood - i go on the course/range and i keep topping it - i feel like kevin costner in tin cup when he gets the shanks.....

If you are keeping your head down and keeping your spine angle through the swing, then just try narrowing your stance a slight bit. This will give you a steeper swing plane and get you to hit into the ball as opposed to hitting on top of it which is more than likely what you're doing. If you want my best suggestion. Go get a lesson or two from a Pro in your area thats reputable. He/She will be able to help you more then most here on the forum I would say. Good luck!!

What's in my bag
Driver: Callaway FT- I 9 degree Tour Stiff Fujikura Speeder Shaft
3 Wood: King Cobra LD F-Speed 15 degree Stiff flex
Hybrids: Nickent 4 (23 degree) & 5 (26 degree)
Irons: Callaway X-20's (PW thru 6) Uniflex shaftGap Wedge: Cleveland Tour Action 52 Sand Wedge: Cleveland CG 10 56 degrees


Posted
Keep your head down is the WORST advice anyone ever gives. It should be, keep your hips turning, or keep your spine angle constant.

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted
That is by far the worst problem. I am still trying to fix that in my swing, and I am topping every-other shot.

too bad im chunking the crap out of my shots now - i ty so hard not to top it, i chunk it,...

Keep your head down is the WORST advice anyone ever gives. It should be, keep your hips turning, or keep your spine angle constant.

i seem to read trhis alot - but if i do keep my head down, i always make a good shot - or at least not a topped shot.....


Posted
Keep your head down is the WORST advice anyone ever gives. It should be, keep your hips turning, or keep your spine angle constant.

I think it's better to say "Hit Down" rather than "Head Down." I've seen some people swing with their head down all the time even when they're supposed to follow through.

What's in the bag:
Driver: r7 SuperQuad 10.5° ~ UST Proforce V2 65g Regular
Wood: 906F4 18.5° ~ Aldila VS Proto 80g Stiff
Irons: MP-60 3-PW ~ True Temper Tour Concept S3
Wedges: Vokey Oil Can 252.08, SM56.10 & SM60.08Putter: Marxman Mallet 33"

Posted
If you are keeping your head down and keeping your spine angle through the swing, then just try narrowing your stance a slight bit. This will give you a steeper swing plane and get you to hit into the ball as opposed to hitting on top of it which is more than likely what you're doing.

like i said - I am not topping the ball any more - havent top a shot since i posted this... i seem to be chunking everything now... BUt you are right im going to my instructor this week, to see what he ythuinks... only problem is, when i hit if of mats at the range i raraley have this problem, unless the mats are correcting it......we'll see what the instructor says - this always seems to fix every issue I have...hes pretty good.


Posted
like i said - I am not topping the ball any more - havent top a shot since i posted this... i seem to be chunking everything now... BUt you are right im going to my instructor this week, to see what he ythuinks... only problem is, when i hit if of mats at the range i raraley have this problem, unless the mats are correcting it......we'll see what the instructor says - this always seems to fix every issue I have...hes pretty good.

Now you're getting somewhere. Here's drill that will fix you right up. Take your 6 or 7 iron Put the ball on a tee. Put another tee about 4" past the ball with the head about 1/2" above the grass. Practice hitting both the ball and the tee that is past it.

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted
that will cure a fat shot?

Every time.

You hit ball on tee, then next tee. It will cure fat, thin, path etc. One caviat: Do not let your upper body move forward through the shot.

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted
i dont have any where to try this....i dont have any grass ranges near my house.... everything is mats.......

Then go out in the back yard with 2 tees. Practice hitting both tees, with the 2nd one about a 1/2" above the ground. Then go to the range and imagine the second tee 4" past the ball.

Where do you live? There must be a grass range somewhere.

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted
Lots of things can cause topped shots. One is an overly steep swing which gives no room for error, it either hits flush or is fat or thin. Hanging back on the right foot through a reverse pivot cause thin shots. Coming over the top causing a chicken wing finish causes the left arm to pull in resulting in thin shots. Sway one way or another is another cause. A teaching pro can probably tell you whats going on.

Posted
Then go out in the back yard with 2 tees. Practice hitting both tees, with the 2nd one about a 1/2" above the ground. Then go to the range and imagine the second tee 4" past the ball.

I have a friend who always hits fat shots like 5 inches behind the ball, but he was still able to get the ball up in the air because of his super game improvement iron.

I told him to swing and listen where the swoosh sound is. It should be around the center to front of the stance. He managed to reduce from 5 to 2 inches, but still can't cure it totally. Placing 2 tees might help him. Nice tips, Leek.
What's in the bag:
Driver: r7 SuperQuad 10.5° ~ UST Proforce V2 65g Regular
Wood: 906F4 18.5° ~ Aldila VS Proto 80g Stiff
Irons: MP-60 3-PW ~ True Temper Tour Concept S3
Wedges: Vokey Oil Can 252.08, SM56.10 & SM60.08Putter: Marxman Mallet 33"

Posted
I often hit fat shots that can land several inches early (before the ball) if I start the transition/downswing with my arms rather than my hips. When I start with my hips first and then have the arms follow, I usually hit it pretty well.

In my Bag: (Sun Mountain C-130 '07)

Driver: X460 11°
5W: Big Bertha Ti '05
4h: Fusion FT 23°5i-GW: Big Bertha '04SW: CG11 56° Putter: G5i Anser


Posted
I often hit fat shots that can land several inches early (before the ball) if I start the transition/downswing with my arms rather than my hips. When I start with my hips first and then have the arms follow, I usually hit it pretty well.

I used to do that, but be aware that it's not so-consistent. Sometimes when the adrenaline hits you, you will move your hips way faster than normal.

What's in the bag:
Driver: r7 SuperQuad 10.5° ~ UST Proforce V2 65g Regular
Wood: 906F4 18.5° ~ Aldila VS Proto 80g Stiff
Irons: MP-60 3-PW ~ True Temper Tour Concept S3
Wedges: Vokey Oil Can 252.08, SM56.10 & SM60.08Putter: Marxman Mallet 33"

Posted
i played last night over at bethpage - didnt really hit thtat many fat shots - i was actially hitting pretty well...It smy putting that killed me, im going to go to betpage again tonight, i will see how it goes.

Posted
I like to imagine that im going to hit it perfectly and when i do that i usually hit it real nice.
But if its a technical problem its usually caused by you swinging too hard or casting from the top.

In my Warbird Bag,
I have
Burner Driver 460cc 9.5* Stiff
Three and Five Woods
Precise- 21* and 24* hybridsCCi Cast Irons-4-AW 52* and 56*/14 Vokey 60*/8and i play TP Black or ProV1


Note: This thread is 6686 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.