Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

Accidentally Order Driver Shaft With No Attachments

Keasbey Peppers
 Share
Note: This thread is 2506 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Keasbey Peppers Member

Keasbey Peppers

Posted
Posted

I have an R15 driver, and my instructor recommended going with an extra-stiff shaft instead of the current stiff shaft. It has a Fujikura Speeder 57, so I ordered a replacement Fujikura Speeder 57 in extra stiff (however it's from an SLDR rather than R15, but I figured it's the same). I noticed after it shipped that it didn't have an adapter on it, and I'm completely new to this (I was figuring I could just screw it on). It also says it is "uncut" but is 44-1/2". I'm not sure what this means. Can anyone tell me what my next steps are? Do I order an adaptor and some club glue - or am I able to take the adapter piece off my R15's current shaft and re-use it? The adapter is just the threaded piece correct? Thanks in advance!
 

 

The ad reads:

NEW TaylorMade (SLDR) Fujikura Speeder 57 Extra Stiff Flex (Driver/Fairway) Shaft
The shaft is uncut and 44.5 inches
.350 tip
The shaft has not been used but does have some scratches/scuffs from shipping/handling/storage with other shafts
The shaft does not come with cutting/tipping instructions
No grip/adapter/sleeve is included


cooke119 Great Member

cooke119

Posted
Posted

Hmmm, others may be able to comment, I have little to no experience with shafts, tips, etc., but it sounds to me like you need to take your new shaft and R15 to a good pro shop and see what they say. Sorry for the lack of assistance.  


Keasbey Peppers Member

Keasbey Peppers

Posted
  • Author
Posted
53 minutes ago, cooke119 said:

Hmmm, others may be able to comment, I have little to no experience with shafts, tips, etc., but it sounds to me like you need to take your new shaft and R15 to a good pro shop and see what they say. Sorry for the lack of assistance.  

Thanks for the reply!

What does uncut mean?  

I'll bring it to the local shop as I think I'm out of my element hear. 


Foot Wedge Dedicated Member

Foot Wedge

Posted
Posted
5 minutes ago, Keasbey Peppers said:

What does uncut mean?  

It means it hasn't been trimmed to playing length.  

Diego’s Gear
Driver: Callaway Great Big Bertha at 11.5*
5W: Taylormade Jetspeed 19*
Hybrid: Ping G5 22*
Irons: Mizuno MX-23 4-PW
Wedges: Cleveland RTX 2.0 50*, 54*, 58*
Putter: Ping Ketsch 33”
My Swing: https://thesandtrap.com/forums/topic/93417-my-swing-foot-wedge/

Awards, Achievements, and Accolades
1

Club Rat Super Member

Club Rat

Posted
Posted
1 hour ago, Keasbey Peppers said:

it didn't have an adapter on it,

You can purchase the tip adapter, check at local golf stores or search online.

1 hour ago, Keasbey Peppers said:

or am I able to take the adapter piece off my R15's current shaft and re-use it?

Yes it can be removed.
The key is cleaning the old glue out of it with a small wire brush to reuse.
Again, speak to someone at a golf store and they can make recommendations for either DIY or having it done.
Most stores charge a minimal fee to re-shaft a club when you bring them the components.

DIY is fairly easy, experience is best,

  • Thumbs Up 1

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

Club Rat Super Member

Club Rat

Posted
Posted
2 hours ago, Keasbey Peppers said:

take this new shaft that's .350 and put a .350 Taylormade adapter, will it work on my R15?

Probably not, adapters are made for specific items.

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

Keasbey Peppers Member

Keasbey Peppers

Posted
  • Author
Posted
3 minutes ago, Club Rat said:

Probably not, adapters are made for specific items.

Correct me if I'm wrong, but won't mating to the R15 head (or M1 or SLDR or M3 etc) only depend on the side of the adapter with the threads, not the side the tip of the shaft goes into?


Club Rat Super Member

Club Rat

Posted
Posted
3 minutes ago, Keasbey Peppers said:

Correct me if I'm wrong,

TM tip adapters
The TM0022 is for a .350" tip size shaft. If you are installing a .335" tip size shaft the TM0023 would be the adaptor you need.

TM R15 adapter.jpg

 

 

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

Club Rat Super Member

Club Rat

Posted
Posted
4 hours ago, Keasbey Peppers said:

my question is whether the driver head is designed to only take an adapter that has a .335 tip, if the connection side to the head on the .350 adapter

According to what I have read, the answer would be yes. 
Take a look at the chart from "grips for less"

TM Chart - Tip Adapters

Quote

WHAT YOU NEED TO KNOW

Interchangeable and Compatible Shaft Adapter

Fits various Taylormade Driver models (see model table below)

Available in RH 0.335 Tip, LH 0.335 Tip, and RH 0.350 Tip

Made from high-quality Aircraft Grade Titanium, PVC, and Rubber

This chart list the models which use these adapters

TM Chart.PNG

  • Thumbs Up 1

Johnny Rocket - Let's Rock and Roll and play some golf !!!

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

Note: This thread is 2506 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • WillieT
      Wordle Daily Puzzle

      By WillieT · Posted

      Wordle 1,657 5/6* 🟨🟨⬜⬜🟩 ⬜⬜🟨🟩🟩 ⬜🟩🟩🟩🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
    • DeadMan
      "5 Minutes Daily" Practice Challenge

      By DeadMan · Posted

      Day 37: did my drill swings in the garage with foam balls for about 15 minutes. Working on getting my backswing more turned and then going from there. 
    • iacas
      Retaining Trail Knee Flex in the Backswing

      By iacas · Posted

      Thanks but honestly… I don't know any other way. I don't mind being wrong so long as I know where to go from there. I don't like being wrong — I'd love to get things right (which is different than "being right"). I recommend grabbing a furniture slider or a paper plate or something, and doing something like this: First, make a swing where you let your trail foot swing out as you turn, then twist that foot back in. From DL and FO, it'll look like this: Then, during a regular backswing, try to twist your foot in slightly (demonstrated in the left image): You'll notice a crease along the trail side of your hip, your pelvis will "fold" into that thigh (internal rotation of the hip joint), and your "bits" will be squished a little between your pelvis and your thigh. Ben Hogan said once: "At the top of the back swing the groin muscle on the inside of your rt [sic] leg near your right nut will tighten," Hogan wrote. "This subtle feeling of tightness there tells you that you have made the correct move back from the ball." I don't know about that, but you will probably feel something down around that area.
    • saevel25
      Athletic Motion Golf Video Featuring Our Own Erik Barzeski

      By saevel25 · Posted

      Yep. I think it will start to feel even more athletic when we start on the downswing stuff later.  I know, it's just I want to be younger so I have more time to enjoy the changes. 🙂 
    • iacas
      Athletic Motion Golf Video Featuring Our Own Erik Barzeski

      By iacas · Posted

      I need to drop a couple of stone. 🙂 😛    Yep. Yeah, but in the end, it feels more athletic, like you're actually using your legs, yeah? As you know… we use the best available info we have. Like others, I was fooled a little by 2D images for awhile (moving or still). Unlike others, I've learned and grown and moved on since then, while they're still looking at their images (often from lousy camera angles).
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept