Jump to content
IGNORED

I am looking for a LOW launch driver


Note: This thread is 3948 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I have an extremely high ballflight. I love it for my irons and fairway woods but am having trouble lately with my driver trajectory. Does anyone have any suggestions of a VERY LOW trajectory Driver/Shaft combination?

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...

Link to comment
Share on other sites


I'd give some thought to a Titleist 909 D3 with a Proforce V2 shaft of some sort. Just my two cents...

R7 Superquad

Exotics 18*

Exotics 25*

AP2 (2008)

CG15 56* & 60*

Rossa Imola 8

TP Black LDP
 

Link to comment
Share on other sites


I'd give some thought to a Titleist 909 D3 with a Proforce V2 shaft of some sort. Just my two cents...

I was thinking of that driver. It is the lowest launch titleist offers. They also have the Diamana White board, and Fuji Rombax 7z08

Another driver i was looking at is the G10 7.5 with the pro launch Red.

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...

Link to comment
Share on other sites


I'd look to get a driver fitting. It's usually pretty cheap relative to the cost of a new driver, and sometimes they will apply the fitting $ towards the club. It would probably be good to set a budget for yourself before going in.

"You can foment revolution or you can cure your slice - life is too short for both" David Owen

WITB*: 2010 winter edition

Driver: AyrtimeFW/hybrid: Distance Master Pro Steel 5w, 7w, 27* hybridIrons: Powerplay 5000 hybrids (6i-SW)Wedge: SMT Durometer 55 degPutter: Z/I Omega mallet*as soon...

Link to comment
Share on other sites


adams 9016d with a white board is about as low launching as it gets you can look on golf wrx for more info or try almost anything with a matrix tphd7 and you will bring your ball flight down a lot again for info check golf wrx it is the shaft camilo is using right now in a cobra speed pro s 10.5 he uses and x flex if you tried this combo i think it will keep your flight down as i think we can both agree camilo is a beast. now all of this is if you mean very low if you just want something that won't ballon try a 7.5 ping rapture v2 with a whiteboard or a cheaper proforce v2 if your not into excotic shafts you can also try a and adams 9015d with a whiteboard hope this helps and if your really in need of the lowest launching driver try the cobra speed pro s with a tphd 7 in x flex maybe 9.5 8.5 loft

driver. taylormade tour burner tp ust avixcore tour green 75 x
3 wood 909 f3 13* voodo xnv8
3 hybrid adams idea pro vs proto 95x
irons 3 no 4 5-pw nike cci forged blades
gap wedge nike sv tour blacksand wedge cg14 56* 14flopadopolous vokey spin milled 64 7putter scotty cameron classics newport...

Link to comment
Share on other sites


Anything 7.5˚ with an Aldila NVS shaft is low-low.

driver: FT-i tlcg 9.5˚ (Matrix Ozik XCONN Stiff)
4 wood: G10 (ProLaunch Red FW stiff)
3 -PW: :Titleist: 695 mb (Rifle flighted 6.0)
wedges:, 52˚, 56˚, 60˚
putter: Studio Select Newport 1.5

Link to comment
Share on other sites


nvs is made to launch pretty high it was made to have the same cariteristics of the nv just higher launch

driver. taylormade tour burner tp ust avixcore tour green 75 x
3 wood 909 f3 13* voodo xnv8
3 hybrid adams idea pro vs proto 95x
irons 3 no 4 5-pw nike cci forged blades
gap wedge nike sv tour blacksand wedge cg14 56* 14flopadopolous vokey spin milled 64 7putter scotty cameron classics newport...

Link to comment
Share on other sites


adams 9016d with a white board is about as low launching as it gets you can look on golf wrx for more info or try almost anything with a matrix tphd7 and you will bring your ball flight down a lot again for info check golf wrx it is the shaft camilo is using right now in a cobra speed pro s 10.5 he uses and x flex if you tried this combo i think it will keep your flight down as i think we can both agree camilo is a beast. now all of this is if you mean very low if you just want something that won't ballon try a 7.5 ping rapture v2 with a whiteboard or a cheaper proforce v2 if your not into excotic shafts you can also try a and adams 9015d with a whiteboard hope this helps and if your really in need of the lowest launching driver try the cobra speed pro s with a tphd 7 in x flex maybe 9.5 8.5 loft

Cobra website says the Speed Pro S is the HIGHER launching of the 2 speed pros if you are talking about the S9-1 model. The matrix TP7 is out of my price range and out of my realistic idea that a shaft could be worth that much money. Thanks for the good info on the adams though thats not the first time someone has suggested that head.

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...

Link to comment
Share on other sites


Anything 7.5˚ with an Aldila NVS shaft is low-low.

Do you mean DVS aldila

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...

Link to comment
Share on other sites


I'd look to get a driver fitting. It's usually pretty cheap relative to the cost of a new driver, and sometimes they will apply the fitting $ towards the club. It would probably be good to set a budget for yourself before going in.

Yeah I am going to Golfsmith in San Fran next week to get on the analyzer.

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...

Link to comment
Share on other sites


Agree the 909 D3 is a good choice for lower ball flight, and the Aldila shaft that produces a low to mid flight is the VS-proto. I like both of these choices for a lower flight.

RC

 

Link to comment
Share on other sites


Agree the 909 D3 is a good choice for lower ball flight, and the Aldila shaft that produces a low to mid flight is the VS-proto. I like both of these choices for a lower flight.

I've had the VS Proto before and really didnt like it. I had it in an FT3 i used to have. I preferred the Pro Launch Red, and the Diamana. I am definately going to hit the 909 D3 you guys have made that a MUST hit on my list.

:taylormade: R9 9.5d with Fujikura Motore 65 Stiff
ss-07 13deg 3 wood Graphite Design Purple Ice 85-S
Md-17 1i/4w UST V2 Tour Hybrid X
A3 Pro 20 Tour Prototype Mitsubishi Javln X
MP 57 4,5,6 Project X 6.5 MP 67 7,8,9 Project X 6.5 Vokey 200 series 48d Project X satin 6.5/ Vokey 09SMTC 54.11...

Link to comment
Share on other sites


I hit both the D3 and D2 at a demo day. I'd be VERY surprised if you didn't like the feel of these heads with appropriate shafts for your swing. I can't wait to get fit for mine. Being in the northeast, there is still some weather to get through before I can get a proper fitting outside

R7 Superquad

Exotics 18*

Exotics 25*

AP2 (2008)

CG15 56* & 60*

Rossa Imola 8

TP Black LDP
 

Link to comment
Share on other sites


I tried out the Ft-iQ on a launch monitor, and it had a pretty low launch angle, and that was with 10 deg of loft, and i was hitting an 8.5 before that and the 10 in the FT-iQ was lower than the 8.5 in my titleist.

Ft-i 10dg
200 steel 3 wood 15dg, 22dg rescue dual
edge cft 19dg hybrid
G2 (4-pw)
spin milled 52,58dg (oil can)white hot tour #2hawk

Link to comment
Share on other sites


heads-
g10
rapture
g5
All in 7.5

Titty 907D2 7.5

A burner TP V1.. super low launch low spin. These are tour issue only, if you can find a retail one, well there pretty rare..

shaft wise, get a F6M2, F7M2, or whiteboard. any of these can be had for 125 bucks shipped to your door.

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...

Link to comment
Share on other sites


the cally ft5 tour is a pretty low launching driver.

What's In My Bag

Driver R9 Supertri 9.5
3 WoodR9
3 Hybrid: Baffler DWSIrons X-20 Tour 4-PWGap Wedge RAC TP SmokeSand Wedge Vokey 56.14Lob Wedge Vokey SM 60.7Putter:SeeMore FGP Black

Link to comment
Share on other sites


They say John Daly hand bent his own down from a 7.5 down to like 5.8 when he played Titleist.

FTi 10* Draw w/ ProLaunch Blue 65g Stiff
5 Wood
Walter Hagen Ultradyne Blades 3-PW
52*
X-Tour Vintage 56.13 X-Forged Chrome 64.09 Dual Force BladeBall: B330Rx or Pro V1

Link to comment
Share on other sites


Dunno about heads but you might take a look at the Throttle and new YSQst shafts from Graphite Design. Both are supposed to be low launch and the Throttle is supposed to be for quick swingers....

I'm curious about the YSQst myself as the YS+ and original YSQ are some of the best feeling shafts I've hit.

Home Course: Wollaton Park GC, Nottingham, U.K.

Ping G400, 9°, Alta CB 55S | Ping G400, 14°, Alta CB 65S | Adams Pro Dhy 18°, 21°, 24°, KBS Hybrid S | Ping S55 5-PW, TT DGS300 | Vokey 252-08, DGS200 | Vokey 256-10 (bent to 58°), DGS200 | Ping Sigma G Anser, 34" | Vice Pro Plus

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Note: This thread is 3948 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Holy Crap! Wordle 1,035 1/6 🟩🟩🟩🟩🟩
    • Eh. He broke ONE of Tiger's records. Youngest to be ranked #1 in AJGA. It didn't help that Tiger's birthday is in late December, or that Tiger didn't play many AJGA events before he was 15. Did he do any of these things? TIGER WOODS' AMATEUR VICTORIES YEAR WIN(S) 1984 10-and- under Junior World Golf Championships Boys    1985 10-and- under Junior World Golf Championships Boys    1988 Boy's 11-12 Junior World Golf Championships   1989 Boy's 13-14 Junior World Golf Championships   1990 Boy's 13-14 Junior World Golf Championships, Insurance Youth Golf Classic   1991 U.S. Junior Amateur, Boys 15–17 Junior World Golf Championships, Orange Bowl International Junior Look at some other AJGA Players of the Year. How many of these names do you recognize? A few, for sure. I assure y'all, I'm not trying to pee in your Cheerios. I just don't get what the point is. Okay. I get that, then. Thanks.
    • Day 56: 4/19/2024 Okay, even though I'll be teeing it up in a tournament in less than a week. I couldn't find time to get to the range today.  I spent time on the indoor putting mat.  And I spent time in front of the mirror with my 7 iron. Then again later with the driver.  I also thoroughly cleaned all my clubs. 
    • Just stumbled onto the article.  Totally random and thought it might be interested to hear other thoughts. maybe I am tired of all the LIV crap and  this just caught my attention.
    • Day 1: Spent some time hitting some balls. Working on my hips and a “soft” and straight trail arm. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...