Jump to content
IGNORED

Questions about Custom Club Making


Note: This thread is 5296 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Im a Junior in high school, and I have to to a graduation project before the give you your diploma, so im going ahead and figuring out what i want to do, because i have to have a product to present along with a paper. I dont really know much of anything about custom club building or club making but i figured wgile doing this stupid project i could throw a few clubs in the bag haha. I know that snake eyes is a main brand for club making, but i would like to know any other good ones, and if these clubs are really worth putting in your bag? like a wedge or fairway wood, or putter. the prices are pretty cheap so can these clubs really compete with titleist, TM, Ping, etc.? Any help is appreciated thanks!

G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"
Link to comment
Share on other sites


snake eyes is a nice brand. i tried their irons (they were forgiving and long) but i liked the titleist ap2 better so i went with those. snake eyes is not very well known in the USA, it's quite a popular brand in the UK. If you're looking for cheap clubs which can easily be custom fit then you can't go wrong with snake eyes.
you could also consider MD Golf and Benross (British brands) although i'm not sure you can find these in the USA.
Link to comment
Share on other sites


There are very good and offer everything you need. One of my golfing buddies plays them. He needed a custom set because he's very tall and went to Golfsmith and they put it together for him. He hasn't had a problem and they seem comparable to the "brand names" the rest of use.

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry

Link to comment
Share on other sites


Sounds like a lot more fun than the projects I did in high school many years ago! I have an off-the-wall idea for your project: how about build a set of clubs for a disabled person, or disadvantaged youth? You'll have the experience of building the clubs, make an impact on someone's life, and have a memory that will last you a lifetime. And it will look good to a college entrance examiner as well.

I wouldn't be surprised if you could get Golfsmith or other component supplier to donate the materials. The paper you write can cover dealing with a corporation for charitable giving, your experience working with a person to identify their special needs, and the experience of that person the first time they try out their new custom clubs built by someone who gave their time to make someone else's life a little better. This would be much better than a paper that just basically said you built a few golf clubs.

Give it some thought. To me, this sounds like a lot more fun than just looking at this as that "stupid project" (as you put it).
Link to comment
Share on other sites


if there is a Golfsmith near you. Sign up for their Grocery store mvp card type deal and you get 1 free instructional attendence

Use it for their club making demo day. Not only do you get shown and learn everything you need to know for excellent clubmaking but you also get to make and keep a free snake eyes sandwedge !!!! huge bonus and value!

What's In My Bag?
Driver : Diablo
3wood : Diablo
Hybrid : 3DX RC Ironwood #3 20*
Irons : j36 cb's Putter : Tour Platinum 7081Ball : TP Black LDPHome Course :Lonnie Poole Golf Course at NC State University 74.7/134Eagle Ridge Golf Club 73.0/131

Link to comment
Share on other sites


Sounds like a lot more fun than the projects I did in high school many years ago! I have an off-the-wall idea for your project: how about build a set of clubs for a disabled person, or disadvantaged youth? You'll have the experience of building the clubs, make an impact on someone's life, and have a memory that will last you a lifetime. And it will look good to a college entrance examiner as well.

thats a tremendous idea Clambake...my high school years are behind me...but that is something I would even consider doing just for fun. Golf has given everyone here on these boards a bunch of enjoyment...why not spread it around. see if there are any First Tee chapter in the area...

in my bag:

Driver: '08 Cobra F Speed LD 10.5 w/UST Proforce V2 Tour Flight stiff

Fairway: Adams Speedline Fast10 3-wood w/Aldila Wasabi stiff
Hybrid: Nickent 3dx 3H
Irons: Nike CCI forged 4-pw Wedges: Nike Victory Red 52 56 60 Putter: Rife Mr. Beasley Balls: Bridgestone B330-RX Tees: epoch

Link to comment
Share on other sites


I did a yardage guide for my home course when I was a senior in high school but putting a club together is pretty easy. I've put a couple together and I still use the snake eyes hybrid I built. I mean really besides making the correct cuts to the shaft it's just using the epoxy to put the stuff together and put a grip on it.
Driver: i15, 3 wood: G10, Hybrid: Nickent 4dx, Irons: Ping s57, Wedges: Mizuno MPT 52, 56, 60, Putter: XG #9 
Link to comment
Share on other sites


A brand I would look at is KZG Golf. They make some high quality clubs and I have seen the heads only wedges for reasonable prices.

I'm pretty sure KZG doesn't sell heads unless it's to one of their dealers. Those people usually just build it for you, so getting just a KZG head is usually tough. But, they're great products. I've used Snake Eyes wedges for the majority of this year and they're solid. It doesn't compare to a Vokey, but for the price, it is a good wedge.

To the OP, sounds like a good idea. Snake Eyes is a good brand like I've said. Check out Maltby, too. They make good stuff, too.

In my Ogio Ozone Bag:
TM Superquad 9.5* UST Proforce 77g Stiff
15* Sonartec SS-2.5 (Pershing stiff)
19* TM Burner (stock stiff)
4-U - PING i10 White dot, +1.25 inches, ZZ65 stiff shafts55*/11* Snake Eyes Form Forged (DGS300)60*/12* Snake Eyes Form Forged (DGS300)Ping i10 1/2 MoonTitleist ProV1

Link to comment
Share on other sites


Thanks I really like the idea about the clubs for handicapped people clambake that's really cool. Anymore ideas about that or just anything else I could use for making clubs would be great. The the main goal for the project is to get into something you really don't know anything about, but still something that intrests you. And thanks for the comments Rob, if your just here to bash me for some reason then get a life.... Thanks everyone hope to hear more!
G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"
Link to comment
Share on other sites


hirekogolf.com is a great place to get your components. the acer xk line has built up quite the reputation, and was even featured in the 2009 hot list from golf digest.

in my bag:

Driver: '08 Cobra F Speed LD 10.5 w/UST Proforce V2 Tour Flight stiff

Fairway: Adams Speedline Fast10 3-wood w/Aldila Wasabi stiff
Hybrid: Nickent 3dx 3H
Irons: Nike CCI forged 4-pw Wedges: Nike Victory Red 52 56 60 Putter: Rife Mr. Beasley Balls: Bridgestone B330-RX Tees: epoch

Link to comment
Share on other sites


okay thanks ill check it out. anything else anyone??
G15 9* Driver
LD Speed 15* 3 Wood
S9-1 18* 5 Wood
S9-1 21* 7 Wood
Burner Irons (5-AW)MB 54* WedgeSV Tour 60* WedgeAnser lNXT Tour "Golf is a game in which you Yell 4!Shoot 6...And write down 5."-Chi Chi "The Sword"
Link to comment
Share on other sites


A brand I would look at is KZG Golf. They make some high quality clubs and I have seen the heads only wedges for reasonable prices.

You are spot in !

What I Play:
913D3 9.5°Diamana Kai'li 70 Stiff  "C3" | 910F 15°, Diamana Kai'li 80 Stiff "D2" | 910H 19°,  Diamana Kai'li for Titleist 85 Hybrid Stiff | Titleist 714 AP2 4 to P Aerotech Steelfiber i110 S | SM4 Vokey 50.12, 54.14 & SM5 60.11K| 34" Edel Umpqua + 40g Counter Weight
 
Link to comment
Share on other sites


Note: This thread is 5296 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Feel free to read or not, this is more of a benchmark post for me but I wouldn't mind questions and feedback either. In the words of Arnold Palmer, "Swing your swing". So much easier said than done. Videos to come soon (to the probable horror of most of you here lol), but man: this took along time. Hogan wasn't kidding when he said the secret was in the dirt. Can't say I'm not happy about it though. So here was my situation: My first (and only) post here was back in 2019 about trying to game a new 3-wood to replace my old 2008 Taylormade Burner (which I loved but only carried 208 yards with a stupid-high spin rate).  At that time I had been golfing for about 8 years., I was hitting four 80-ball buckets per day (320 total, I'm a psycho) and playing two rounds per week. I was using a "Width Swing" (probably my 15th try at a 'better' swing) from a book and videos called "The L.A.W.S of Golf" by Jim Suttie, TJ Tomasi and Mike Adams. Since I had hardly any flexibility back then at 49 (still don't lol), I had to get my clubhead depth from the width dimension, meaning dropping back my right foot, flaring my feet, and swinging around my body. This took a ton of work, but I got down from a 15 handicap to an 8 by using it, so I was pretty ecstatic. The problem? My lower back hated it, and I mean bad. Really bad. Like pull-out-in-the-middle-of-a-Houston-Amateur-Golf-Tour-tournament bad. Soooo...while playing some of my best golf, I just figured my golf days were over, especially after the Rona hit the next year in 2020 and shut everything down. I figured I would simply be a golf fan for the rest of my life, and that my days of playing (painfully) were done Fast forward three years. I *really* missed playing golf. I started watching (hold your nose) videos of Moe Norman's swing on YouTube and then that led down the rabbit hole of watching videos of Matt Kuchar and Craig Stadler and Bryson DeChambeau and videos by Kirk Junge and Todd Graves...you get the idea. This went on for weeks...and this is how we always get sucked back in, right? Single plane was supposedly the cure for lower back pain because the extension and torque could be mitigated to a degree that might make a golf swing tolerable for someone with lower back issues. I really missed playing the game, so last fall I thought to myself: "Self, you have nothing to lose. Get your clubs out of the trunk (they'd been sitting in there for three years).  Hold your arms straight and look like an idiot at the PGA Superstore in one of the swing bays trying this single plane swing and at least you'll be the only one who has to witness it." I tried it...and it went horribly wrong. I couldn't even get the ball in the air, I was topping everything at first. Then when I tried Moe Norman's famous 'vertical drop' as he called it, I fatted the mat every time. This went on for the hour I was in there. I left there tired, frustrated and about to say 'screw it'. But when I got to my car and went to get in the seat, I noticed something: Even after about a hundred swings, my back was totally fine. I thought maybe it was because I had injured it all those years ago with a rotary swing and now it had healed. Hmmmm...maybe that was it. After a couple days at home, and more video-watching of Moe and Moe alone, I went back to the hitting bay to see if I could find some sort of workable single plane swing based on what I had watched and taken notes on. This session went much better. Pretty straight ball flight (my miss was a slight cut), and no pulls or hooks (my old misses were the dreaded two-way misses, block or pull-hook). I had kinda-sorta figured out the 'vertical drop' deal, but it was too hard to time it consistently. When I did get the timing right, the ball went dead straight. HOWEVER...I was hitting with a 7-iron the whole time and my normal 148-yard shot now only traveled 134. 14 yards is a lot to give up...but I chalked it up to my swinging slower to get the timing down. Plus, I had no idea how the longer clubs would do or if I could even hit, say, a 3-wood with this swing. After another hundred shots or so, I called it a session and went home. So far, all I hit was a 7-iron with this 'swing' of mine. I had completely forgot about my back and didn't think about it until that evening and realized it felt fine. I thought to myself: "Even if you never get your normal distance back...wouldn't it be fun to just play golf again?" Then I thought to myself: "Self, it would be fun to be back on the golf course again." BUT...I was determined not to make a fool of myself out there, so I kept going back to the hitting bay. This third time I went back, I brought in only my Taylormade Burner 7 wood, thinking the shaft length is short enough that I can make contact with the ball, but it's a fairway wood, so I'll see if this swing can handle that. I hit it great...and straight...but the distance was, alas, like the 7-iron...just not there. "You're hitting it *really* straight though", I sad to myself, as if saying that would console a Recon Marine veteran who's ethos is that manly men do manly things...and a 165 yard 7-wood for me is about the furthest thing from 'manly' there can be on a golf course. Ego... I was torn between my love of playing the game on one hand, and on the other hand going out to the course with a swing that would be mocked, ridiculed and laughed at...but would look passable and understandable if I was 75 years old (I'm 54). Decisions decisions... I went back to the drawing board at home and thought "There's got to be some sort of compromise to this swing...some kind of combination of swings...something I can build that would get my old distance back but not destroy the lower lumbar of my spine." In the past 13 years, I had tried it *all*. Conventional swing, modern swing, stack and tilt (my back still hurts when I think of that one), rotary swing (hello shanks), the peak performance golf swing (don't ever fat one while trying that swing, you might break your wrists), 3/4 hold-off swing (great for wedges, not so much a driver), hand-and-arm swing...and on and on. Soooo...I went back to thinking about the width swing I had learned in the L.A.W.S of golf book and videos I had studied, and how I could implement the width element of that swing without destroying my back. It was the only swing technique I ever tried that got me comfortable distance and consistent impact and ball flight while swinging around say 85% or thereabouts. Hmmmm... What if I could combine it with a single plane swing? I know, I know...it sounds loony tunes. But I had already plunked down the $149 for a year's worth of unlimited hitting bay time at the PGA Superstore (commitment, right?), so I figured I had nothing to lose by attempting what would appear to be  moronic and ridiculous-looking setups and stances and swings in a hitting bay all by myself. The results have been nothing less than astounding to me. Setup (after four months of this on an actual driving range and getting *really* strange looks) is as follows (I'll have pics and video soon for whoever can bear to watch it): Grip: Left hand *slightly* strong, right hand neutral (this is to keep the ball from hooking off the planet). Alignment: All irons straight off the nose (I'll explain why in a bit), fairway woods of my left cheek, driver off my left nipple. Posture: *Slightly* hunched over with rounded shoulders (this is to give me room for my arms to come under my chest in the back swing). Foot Position: Left foot flared, right foot flared and dropped back about 12 inches (this gives me room to rotate my thoracic spine and gives the club depth in the width dimension, since I don't have Bubbas Watson's flexibility). Shoulders stay square with the target line. Hands stay high and in line with the lead forearm a la Moe Norman. Slight spine tilt away from the target. Backswing is in and up at a 45 degree angle if looking from behind. I only swing back until my lead forearm is parallel to the ground. I tuck the left elbow on the downswing and let it rip. The reason I play all my irons off my nose? Wait for it... All my irons... 7 iron to Sand Wedge... are single length irons. So I'm using a rotational swing...on a single plane...with single length irons (based off my 7 iron). Never hit my irons better in my life - and hitting just as far now as I was when I started golfing 13 years ago. Also - driver and fairway woods are stupid-easy for me to hit now. My misses are mostly a high cut now, and that only happens when I slide my left hip because I get fast at the top. As long as I keep my lower body quiet until my hands drop (they don't have far to drop, either), then I get a pretty dang straight ball flight. Pull hooks and block are now a thing of the past. Anyhoo, here's the setup of my clubs. I have about a 94 mph driver swing speed. Driver: Ping G410 9 degree cranked up to 10.5 degrees, Alta CB R flex carry is 235-ish  3-wood: Ping G 410 13.5 degrees Alta CB R flex 65 grams, flat setting, stated loft, carry is around 215 5-wood: Ping G-410 17.5 degrees Alta CB R flex 65 grams, flat setting, stated loft, carry is 202 7-wood 2008 Taylormade Burner, 21 degrees, stock REAX S flex 49 grams, carry is 192 9-wood Ping G410 23.5 degrees Alta CB R flex 65 grams, flat setting, stated loft, carry is 182 6 hybrid Ping G425 31 degrees Alta CB R flex 70 grams, stated loft, flat setting, carry is 158  Irons: are all custom fit Sterling single-length irons by Wishon Golf. 7 146 yds 8 135 yds 9 125 yds PW 110 GW 98 SW 83 Putter: Custom Edel blade I had made in 2012 after golfing for a year and I can't hit the broad side of a barn with it. REALLY interested in getting fitted for a L.A.B DF 3 with a forearm grip...stroked a L.A.B. DF 2.1 at the PGA Superstore they had on the 'pre-owned' rack and it was $519 wuuuuut!!! So that's only 13 clubs...but I am looking on eBay to fill that gap where the 5 hybrid should be, would be a perfect 170 yd club right there I think. Before doing to the single length clubs, I had Ping irons 7-PW and four Vokeys in 48, 52, 56 and 60 in the bag and the single length clubs were gathering dust in the closet for the last 5 years. However, after actually playing a few rounds and seeing where the numbers were adding up, it was missed greens from 150 and in. So, I wanted to take the variable length mid and short irons out the the equation to keep my setup simpler. Gotta say, it worked like a charm.  Same setup as a 7-iron for all my scoring clubs and it keeps everything repeatable. Yes, it feels weird looking down at a wedge with 7-iron length, but I got used to it. The ball goes the same distances as my Ping irons and Vokey wedges used to but flies *way* higher and lands super soft. Also, if I want to chip or pitch with them I just choke down a little, as the swing weight difference won't matter much for those shots. I haven't actually kept score yet, as I haven't even gotten around to really working on my short game or putting at all. Right now, I'm just scoring fairways and greens hit or missed, approaches hit or missed and how many pars per round I can make. So far my best since this 'comeback' started is 8 pars, 1 birdie (almost had a hole-in-one lol), two bogies and seven 'others' (fats, thins, skulled chips across the green and tears may have been involved). I hit 3 of the Par 4 greens in regulation and hit 10 of 14 fairways. The ones I missed were not off the fairway by much and I finished the round with the same Pro V1X I started with - albeit a little scuffed up. Anyway, that's the story and after years of struggle I finally found something that works *for me*. I'll try to get some pics of setup and possibly video if anyone's interested and has a strong stomach haha. I'm gonna start reading the Dave Pelz short game and putting bibles this week, I'm sure that will be an adventure haha! Thanks for the space to write this.
    • Day 125 - Played 18. Ball striking is still off. Way off. 
    • Day 28: Wind really aggravated my allergies today, so attempted some full swing work outdoors but was kind of miserable. Moved indoors for some putting and mirror work. 
    • Also, the drop was legit: PGA Tour Fargo Championship 2024: Xander Schauffele controversial drop video, ruling, leaderboard, Jason Day, highlights ‘Most ridiculous thing I’ve seen’: Golf fans fume at US star‘s unbelievably lucky break The rules don't exist only to punish golfers.
    • Day 304: did a stack session. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...