Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6031 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I currently play Nike Slingshot OSS's with a full cavity back. I have tried blade clubs before and loved them, but I couldn't seem to play with them at the time. I have gotten better and was wondering about the Victory Red irons. I've seen the blade edition and hit it (demo) but it's not the same as hitting one on the course.

I would like to know, if anyone has these clubs- full cavity, half cavity, or blade, and how they play on the course. Do they have good feedback? Are they forgiveable?

Please tell me! I am possibly looking into buying these.

Driver: Callaway Big Bertha Diablo 9º
2 Hybrid: Callaway Big Bertha Heavenwood
Irons: Nike Slingshot OSS 6-3 iron
          Taylormade Tour Preferred PW-7 iron
Wedges: Cleveland CG14 50º, 54º
              Taylormade RAC 58º
Putter: Ping Darby 32" shaft


 


Posted
I hit the cavities recently and found them very easy to hit with an almost forged feel (the cast irons are 25% softer then the 17/4 steel used on most cast clubs). Im going to hit them again and compare them with some ap1's and go with the ones I like best.
I like the nike blades and can hit them fine but for some reason (and not just nike blades) I lose upto 20 yards per club which just isn't worth it.
adams.gif Speedline fast 10 9.5˚
adams.gif Speedline fast 10 15˚
adams.gif A7 17˚
adams.gif Idea Pro 3-PW
mizuno.gif MP T-11 52˚, MP T-10 58˚  cameron.gif Red X  titleist.gif NXT

Posted
thats exactly what happens to me. Thanks. I hit these clubs pretty ok, but some shots will just not go. I will try the Nike Victory Red cavities tomorrow.

Driver: Callaway Big Bertha Diablo 9º
2 Hybrid: Callaway Big Bertha Heavenwood
Irons: Nike Slingshot OSS 6-3 iron
          Taylormade Tour Preferred PW-7 iron
Wedges: Cleveland CG14 50º, 54º
              Taylormade RAC 58º
Putter: Ping Darby 32" shaft


 


Posted
Post back with your thoughts on them
adams.gif Speedline fast 10 9.5˚
adams.gif Speedline fast 10 15˚
adams.gif A7 17˚
adams.gif Idea Pro 3-PW
mizuno.gif MP T-11 52˚, MP T-10 58˚  cameron.gif Red X  titleist.gif NXT

Posted

I have the blades and like them a lot but I haven't been able to play a round with them yet since I live in northern Michigan. But i have hit them outside at a covered range once and hit them into the net a lot. I personally think they're pretty forgivable when compared to other blades. I can't say anything on the distance because when i hit outside it was only 35* and was hitting cold balls and you can't really tell where the balls land in the snow

In my Pro Combo Tour Stand Bag:

Driver: 9* Ft-5
3 Wood: 15* Ft tour
Irons: VR Blades 3-PWWedges: VR 52.10, 56.10, 60.06Putter: 34" Newport 2.5 Detour Method 003 blade in the springBall: One Tour or Platinum Home Course: Grayling Country Club


Posted
I played Nike irons for a short while, and found I lost distance too. Good feel, but not worth the distance loss.
sunmountain.gif C-130 Cart Bag: titleist.gif 910D2 10.5Deg   taylormade.gif R9 15Deg, Burner Superfast 5W/7W   mizuno.gif MP-57 5-PW
scratch.gif 54*ds, 58*ds    cameron.gif Red X2    callaway.gifTour iZ
 

Posted
i see. and what about the half cavity? does that lose any distance as well? isn't that a combo of the blade and the full cavity?

Driver: Callaway Big Bertha Diablo 9º
2 Hybrid: Callaway Big Bertha Heavenwood
Irons: Nike Slingshot OSS 6-3 iron
          Taylormade Tour Preferred PW-7 iron
Wedges: Cleveland CG14 50º, 54º
              Taylormade RAC 58º
Putter: Ping Darby 32" shaft


 


Posted
it is suposed to be a median of blade and full cavity... I think they look better too. At least to the full cavity...The blade looks uber nice =D

Bag: Ogio
Driver: Cleveland HiBore XLS 9.5 gold stiff
3W: Pro Select 15*
Irons: Pro Select 3-PW
Wedge:Adams Tom Watson set GW, SW, LWPutter: Cleveland VP 1balls: E6+ or Srixonshoes: Adidas powerband"Stop looking at my ears and play!"Home course. Antler Creek; tees; Black 77.5/150, Gold...


Posted

The blade looks amazing (if only i had the game to play them)

In My Hank Haney IJGA Bag
Driver: FT Tour 9.5 w/ Aldila Voodoo Stiff
3 Wood: i15 15.5 w/ avixcore red stiff
Hybrids: Rescue 09 19, 22 w/ fujikara fit on stiff
Irons: 4 & 5 MP-52, 6-PW MP-58 w/ KBS Tour Stiff Wedges: MP T-10 52*, 58* w/ KBS Tour StiifPutter: Fastback 1 34 inBall: : Pro...


Posted
Just an update. I went back today to try the full cavity backs along with the AP1's, i10's and VR forged split cavity backs. I quickly ruled out the ap1's, the blade looked too long and it felt too heavy. I also ruled out the i10's, they were nice irons with good distance but the ball flight just didn't look great. I tried the split cavity with the DG high launch shaft (not standard in these but standard in the full cavity) and was averaging 2 yards less than the full cavity but they felt much better and there wasn't much difference at all in the forgiveness of either one. Needless to say I pulled the trigger on the split cavities with the high launch shaft. They are beautiful irons and the unique grips are very nice too.
adams.gif Speedline fast 10 9.5˚
adams.gif Speedline fast 10 15˚
adams.gif A7 17˚
adams.gif Idea Pro 3-PW
mizuno.gif MP T-11 52˚, MP T-10 58˚  cameron.gif Red X  titleist.gif NXT

Posted
I just went through a proper fitting at a local shop with the VR blades. Getting fitted with nike clubs is amazing. I really like the feel of the club and distance is the same as any other blade I hit. I noticed when hitting the mid cavity irons the ball flight was much higher than most other brands. Overall they are all solid irons, Nike makes good clubs.

In my SQ tour bag

Cleveland Launcher 460 10.5* stiff
Dymo 3 wood stiff
3-E Apex Blades 1/2" up stiff VR 52* 56* Aussie IBF tour edition 34" w/ ping grip SG5


Posted
I just went through a proper fitting at a local shop with the VR blades. Getting fitted with nike clubs is amazing. I really like the feel of the club and distance is the same as any other blade I hit. I noticed when hitting the mid cavity irons the ball flight was much higher than most other brands. Overall they are all solid irons, Nike makes good clubs.

yes they do.....

and apparently its a secret too......

TM R11/Titleist 910F 15*/ Nike SQ2 20* & 23*/ Nike CCi 5-PW/ Nike SV 52* & 56*/ SC Newport 2 Studio Style 32.5"
Nike 20XIx/Pro V1x


  • 3 months later...
Posted
Loosing distance on mid-cavity and blade irons is a result of not hitting in the sweet spot of the iron. The reason full cavity irons are so popular with mid to high handicappers is that you can mis-hit them and still end up ok. With mid-cavity and blades especially, if you mis-hit them, then you will absolutely see a decrease in yardage. but when you do hit them in the sweet spot, there is no better feeling in the world.

FWIW - if you are a 15 or higher, get the full cavity backs, as they will provide you with a good feel on every shot. Guys who regularly play in the low 80's and are steadily creaping up on the 70's, then the mid cb's are a good choice for playability and for shot responsiveness. The blade design is really only intended for players who rarely hit off the sweet spot and need the playability of shaping their shots and want the most responsive club they can get.

My vote is the Nike Split Cavity irons. They have a blade feel at address, have more playability than the full cavity irons, and are slightly more forgiving than the blades. Stewart Cink and several other tour players use these irons and really like them.

Hit 'em straight!!

Chris
Posted
I've looked very hard at the VR's as well, and one big question keeps coming up for me. I repeatedly read and hear that blades are only for very low handicappers, but I've also read a few times that this statement is somewhat blown out of proportion, and that today's blades arent as difficult to play as ones from years ago. I actually hit some Mizuno blades (cant remember what model) at a demo day a month or two ago, and I left really wondering if they really would be a bad choice for me, because I hit them pretty well. Obviously, I realize that blades arent going to have anywhere near the forgiveness of a GI or SGI iron. I'm wanting to buy something that I can grow into, and I'm looking for some good opinions on whether they're really as hard to play as they're percieved to be, or if it's blown out of proportion a little bit.

 
Follow me on Twitter - TST_Justin
 -  -  - 
 
This Week's Bag Drop - Miura Passing Point 9003 Forged Irons and Adams Idea Pro a12 Irons and Hybrids  - Sweet new forged cavity backs from Miura (do they make any irons that arent simply beautiful?) and irons/hybrids from Adams created with...


Posted
You guys should really go hit some Mizuno blades. I have had MP-9s, MP-14s, MP-29s, and now MP-60s (kinda half-cavity). I never lost distance and the feel cannot be described. Im not hating on Nike, but Mizuno has been doing this for a long time and Ive never hit a Mizuno iron I was dissapointed with.

Sorry for threadjacking ;)
Driver: FT-3 Fusion w/ YS-Power X-flex
3-wood: McHenry Metals 12 degree with UST comp X
2 iron: MP Hi-Fli 18 degree
Irons: MP-60 3-PW w/ Rifle 6.5
Wedges: Vokey Oil Can 52,58 degreePutter: Red X 35X3Ball: ONE Platinum

Posted
Ever get new irons, RHPM? Your sig hasn't changed, I see.

FTi 10* Draw w/ ProLaunch Blue 65g Stiff
5 Wood
Walter Hagen Ultradyne Blades 3-PW
52*
X-Tour Vintage 56.13 X-Forged Chrome 64.09 Dual Force BladeBall: B330Rx or Pro V1


Posted
the blades are good, i've hit them. they offer more forgiveness than any blade i've ever hit. and hitting the ball feels like slicing hot butter when you hit it on the screws. however, i still prefer the mizuno blades. not for any real significant reason, other than i just like MP's.

Posted
I do not believe they are a full cavity iron.

In my Nike Bag...
Driver: 460 SZ 10.5*
Woods: SZ 3 and 7
Hybrid: Ignite
Irons: IgniteWedges: Big Bertha 55*, 58*Putter: FuturaBall: Penta, TP Black


Note: This thread is 6031 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.