Jump to content
Note: This thread is 5733 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I have seen the light and decided to spend more time on the practice green and a little less time on the range this year.

My question is do most courses care if you show up and practice on their practice green without playing that day?

At school, i usually go in and ask the person working the counter if it is ok and they have never had a problem.

But at home the courses are nicer and the rules are stricter so i am not sure how they will react. I want to know if your muni courses care if you practice but don't play that day?

I have never had a problem, or heard of one. I frequent 3 courses over the past 6 months, and have never payed to putt. All 3 course post fees for the chipping range, so i figure no posted fees, means no charge.

In my bag are
Hibore XLS 10.5*
Hibore XLS 22* 3i Hybrid
TA7 irons 3-PW, SW
CG11 60* LW VP #5 putter.


just go and start putting, if someone ask then worry about it. If you just show up and start practicing it will just look like you are warming up before a round.

Speed LD F Stiff Shaft 9.5*
3dx dc 2 ironwood 17*
3dx dc 4 ironwood 23*
710 AP1 5 - P
50.08 Spin Milled CC 56.11 Spin Milled CC 60.04 Spin Milled CCDual Force 2 Putter #1 Pro V1xForget your opponents; always play against par. ~Sam Snead


But at home the courses are nicer and the rules are stricter so i am not sure how they will react. I want to know if your muni courses care if you practice but don't play that day?

I've spent hours chipping and putting at my local muni (Woodley Lakes) without ever doing anything at the range or the course. I didn't even buy refreshments there!

I have never had a problem, or heard of one. I frequent 3 courses over the past 6 months, and have never payed to putt. All 3 course post fees for the chipping range, so i figure no posted fees, means no charge.

Saddleback College, not too far from you, has a free chipping area. It's not large, but it's there and free, on both the north and south ranges. The north range also has a practice bunker, but I suggest using range balls in it. It doubles as a practice fairway bunker. Unfortunately, that's only open to the public on weekends.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Another hybrid in here too.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Never known a public course to have an issue with practicing on any of the practice areas, putting or chipping. Private courses generally do not allow it, and semi-private courses may or may not. Keep in mind that some courses allow chipping on the putting green, but many do not, so don't get in trouble for that.

Rick

"He who has the fastest cart will never have a bad lie."

Awards, Achievements, and Accolades

The semi-private that I grew up with as my home course didn't care...I could/and did, show up in a t-shirt and shorts and practiced and never had a problem.

Sumo 5000 UST V2 S
906F2. UST X. 13*
Sumo2 hybrid 2. X flex. 17*
X Forged. Project X 5.5:
RAC 50* Vokey 54* and 58* Cherry bomb Newport 2 35" One Black


...Keep in mind that some courses allow chipping on the putting green, but many do not, so don't get in trouble for that.

I have seen that posted on practice greens a couple of times.

Most of the time if you take your whole bag and set it down next to the green, no one will ever question if you are practicing or warming up to play. I used to do it all the time.

I will judge my rounds much more by the quality of my best shots than the acceptability of my worse ones.


Saddleback College, not too far from you, has a free chipping area. It's not large, but it's there and free, on both the north and south ranges. The north range also has a practice bunker, but I suggest using range balls in it. It doubles as a practice fairway bunker. Unfortunately, that's only open to the public on weekends.

Thank you for the info. My wife goes to school there. My daughter calls it the circus tent, for the big net that is drapped over the whole thing

In my bag are
Hibore XLS 10.5*
Hibore XLS 22* 3i Hybrid
TA7 irons 3-PW, SW
CG11 60* LW VP #5 putter.


seems like the thing to do would be to ask them at the proshop
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Note: This thread is 5733 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • What technology? There’s not much. Or a spreadsheet. 🤣😜
    • I was thinking about what you suggested on this. And it's very possible its true.  I was also thinking, why wouldn't they have a piece of software that tells them something like: "If you drill the shaft hole at x angle and the shaft is y long, but the weights in A, B and C locations at D, E and F amounts? I mean we aren't modelling anything here that isn't a known relationship?  I've been in the manufacturing world a long time (33 years.) I've worked for and seen tons of manufacturers in the US who can handle one-piece flow with no hiccups what so ever.  I would love to take a plant tour and offer my services to these guys. On a whim, I looked on their webpage and they do have two positions available. A fulfillment associate and a fitting representative. Both at positions are at their plant in OR. Neither of these was a lean manufacturing engineer so I moved on.  I apologize for beating this dead horse.  I'm not sure why the cost adder for custom built from standard parts bothers me so much. It could be because I've worked so many places that just have you build up a nomenclature which relates to a build sheet and end of line test. Which equals no cost adder for standard parts. Maybe it's because I once toured the Roles Royce plant in England and thought "I'd never feakin buy one of these cars." Maybe I've been spoiled by PXG and Mizuno, the last two places I've order custom fit irons from. They customized each club including lie angle tweaks, loft tweaks, length tweaks, weight port tweaks, etc... No cost adder. 
    • Ugh, I think I'm a little out of practice. Wordle 1,278 5/6* ⬛🟨🟨⬛🟨 🟨🟨🟨⬛🟩 ⬛🟩🟨🟨🟩 🟩🟩⬛🟩🟩 🟩🟩🟩🟩🟩
    • Wordle 1,278 4/6 ⬜⬜⬜⬜🟨 ⬜⬜⬜⬜🟨 ⬜🟩⬜🟩🟩 🟩🟩🟩🟩🟩
    • Wordle 1,278 3/6* ⬛⬛⬛⬛🟨 ⬛⬛🟨🟨⬛ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...