Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5972 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I'm thing of upgrading my current driver at the moment (TM R7 460) after yesterday demoing a 909 DComp around my local course and consistently ending up 20m further down the fairway (well sometimes the rough as well). I really didn't expect to get that much extra length out of a newer club, but i was very impressed with it.

I've never had a trouble slicing the ball, my bad drives are normally pull hooks
so I really don't like looking at a closed face as it really doesn't inspire me with any confidence. I really liked the way the 909 DComp sat at address, but before a get something new I want to try everything that might suit me. So what would people recommend I try in a drivers with a square to open face, and that just bombs it out there.

Cheers

Posted
ping g10. Its a 460, and has a neutral face, its a pretty good driver. I would also reccomend the r9, its such a great stick, im getting one withing the next couple days!

Posted
I think its about 105, but i'm not 100% on that, i normally hit about 250-260m. I also generally get a pretty low launch with not that much spin on my drives.

Posted
tour burner tp little biased but a great club with 0.5 degrees open face
callaway ft 9 tour nike dymo change shaft though it sucks

driver. taylormade tour burner tp ust avixcore tour green 75 x
3 wood 909 f3 13* voodo xnv8
3 hybrid adams idea pro vs proto 95x
irons 3 no 4 5-pw nike cci forged blades
gap wedge nike sv tour blacksand wedge cg14 56* 14flopadopolous vokey spin milled 64 7putter scotty cameron classics newport...


Posted
I would have to say either the Ping G10 or The TaylorMade R7 or R9. All very powerful drivers and for the most part very forgiving.

In my Nike Bag...
Driver: 460 SZ 10.5*
Woods: SZ 3 and 7
Hybrid: Ignite
Irons: IgniteWedges: Big Bertha 55*, 58*Putter: FuturaBall: Penta, TP Black


Posted
FT-9 Tour nuetral best I've ever had.

In my new FT carry bag
FT-9 Tour nuetral 9.5
FT-15 degree 3 wood
Fussion Hybrids #2&4
Fussion irons with Grapholoy Pro launch Red shafts56&60 Cally X forged wedges with Red shaftsSG9 putterCally I ballBushnell Meadealist range finder


Posted
Basically you are asking everyone's favorite driver, but in the tour version. Get whatever you like the best, just get the "Tour" or "TP" version, or the driver designed for better players.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Posted
i have a 907 D2 which is a better players driver. It isn't the most forgiving driver but if you want to be able to work your driver its a good cheap club(got it for $120 used)

What I Play:
Titleist 910 D3 9.5* Diamana 'ahina X-stiff  | Titleist 909f2 13.5* x-stiff | Taylormade Rescue 19* steel shaft stiff |
Titleist ZB 3-PW S300 | Titleist BV SM 52-08 58-12  | 34" Scotty Cameron California Del Mar | Penta TP


Posted
Any Titleist Driver, any "TP" Taylormade driver, any "neutral" Callaway driver, Ping G10 or Rapture, Cobra S9-1 "Pro" Series...just read and make sure the face angle is 0 or open.

There's really no such thing as a bad driver anymore. Titleist, Taylormade, Ping, and Cobra consistently get rave reviews from low handicaps, so maybe that tells us something.

If you are looking for a driver that will keep you spin rate up a little bit, the Tltleist D2, King Cobra S9-1 Pro S, and Ping G10 are specifically designed as "low to mid spin" rather than "low spin" like most drivers today.

Personally, I recently tried out the King Cobra S9-1 Pro S and loved it. The face on it is 1.5 degrees open, and I think it sets up very nicely. It was launching high for me and stayed in the air forever. Good luck.
Scott T

G5 9° V2 75 X / 909F2 15.5° V2 85 X / 909H 19° V2 100 X / MP-33 #3-PW X100 / X-Forged Chrome 54.15 60.10 X100 / FGP Black 34" / Penta TP

Handicap is a guess because I haven't established one yet.Best score so far is a 71 on a 6,509 yard 70.3/121 par 72 muni, during a glorious...

Posted
One last note. You have probably heard this before, but the shaft is even more important than the driver head. Make sure to try out some different ones and go from there. You can get a much better shaft for not too much extra money, and it's definitely worth it.
Scott T

G5 9° V2 75 X / 909F2 15.5° V2 85 X / 909H 19° V2 100 X / MP-33 #3-PW X100 / X-Forged Chrome 54.15 60.10 X100 / FGP Black 34" / Penta TP

Handicap is a guess because I haven't established one yet.Best score so far is a 71 on a 6,509 yard 70.3/121 par 72 muni, during a glorious...

Posted
How do you test shafts???? I mean other than R S X but they tend to be the manufacturer's prefered brand if not thier own...how do you shop shafts?
It's the indian, not the arrow! But it sure is nice to have good arrows!!!!!

Driver : r7 Limited 9.5* Matrix Ozik X-Con 5.5 (Reg) | Fairway: 906F4 15.5* (Reg) | Hybrids: DWS Baffler 3/R 20* (Reg) & Baffler Rail H 4-H 22* (Reg) | Irons: AP1 5-G (Reg) | Wedges: SW - SM56-10 & LW - SM60-04 | Putter:.....

Posted
It used to be kind of tough to test shafts but it is getting easier.

Some of the bigger and better golf shops have stations with interchangeable shafts, now. They let you test the same driver head with a bunch of different brands and flexes of shafts. I think Callaway and Ping have cool "cart station" type of things at bigger stores for exactly this purpose. One of the best options is if you happen to live near some sort of Titleist (or Callaway, Ping etc) headquarters or supercenter or something like that, I'm not really sure what they call them. Basically, your best bet is to do a little research to find the biggest and best store in your area.

As for ordering, through any of the major stores they will custom order a shaft for you if you ask them to. Also, you can customize online at TGW.com and other websites for either free or little change.

To get you started, I would try out the UST Proforce V2 shaft and some Aldila shafts. The V2 is your basic, high-quality shaft for good players and it is only about $75 or so. Personally, I have settled on the V2 as my shaft of choice so I don't know too much about other ones.

Grafalloy, Fujikara, and Mitsubishi are some other shaft brands. In my opinion, the super high end "exotic" shafts are not worth the price; you can get all the performance you'll likely want out of normal models from quality brands.
Scott T

G5 9° V2 75 X / 909F2 15.5° V2 85 X / 909H 19° V2 100 X / MP-33 #3-PW X100 / X-Forged Chrome 54.15 60.10 X100 / FGP Black 34" / Penta TP

Handicap is a guess because I haven't established one yet.Best score so far is a 71 on a 6,509 yard 70.3/121 par 72 muni, during a glorious...

Posted
I too play a g5 and love that club, although I am considering upgrading to the Callaway ft-9
Driver: Taylor Made R9, Woods: Callaway Hyper X 3 wood, Hybrid: Cleveland Mashie 20 degree Irons: Callaway X-20's, Wedge: Cleveland 588 56 degree, Putter: Cleveland CC 6 Classic Black Platinum, Ball: Noodle, Shoes: Contour
 
Maryland Golf and Country Club in Bel Air, MD.

Posted
Cheers for all the replies. We have a problem over here being a much small market, so we don't get nearly as much choice as you seem to over there. It is pretty hard to demo clubs outside, unless it is the single demo you get from the pro shop, and the is no chance to try it with another shaft, so really I'm most likely to be get the stock shaft in what ever club I get.

Note: This thread is 5972 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.