Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

Modified Scotty Cameron Detour putter

Cut Back....
 Share
Note: This thread is 5845 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Cut Back.... Member

Cut Back....

Posted
Posted

I modified my Scotty Cameron Detour putter earlier today. Me and my dad cut off a portion (about half) of the end and turned it in to a toe-balanced putter. I couldn't stand the distracting line on it. I have pictures to show as well. I would just like to know what you guys think of it.









In the bag:

Driver: R9 460
Fairway Woods:FT 3 Wood, Burner 5 Wood
Irons: R7 DrawWedges: 56 sand, Bob Vokey Spin-Milled 60 LobPutter: DetourBall: NXT Extreme


Laxplayer201092 Great Member

Laxplayer201092

Posted
Posted
That's uh.. Original LOL you could prolly sell it ok eBay for a ton saying that's it's custom made and such :P haha

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...


Cut Back.... Member

Cut Back....

Posted
  • Author
Posted
That would be good. Soon we will put the 20g weight inside the small pocket on the end and fill it with epoxy to add some weight to it.

In the bag:

Driver: R9 460
Fairway Woods:FT 3 Wood, Burner 5 Wood
Irons: R7 DrawWedges: 56 sand, Bob Vokey Spin-Milled 60 LobPutter: DetourBall: NXT Extreme


Mr3Putt Dedicated Member

Mr3Putt

Posted
Posted
So you cut a piece off to reduce the weight and that modification will allow you to glue some weight back on?

How did you determine that sawing it in half would make it perform better?

I hope it works well for you.

aschaefer Member

aschaefer

Posted
Posted
i'm all for self-modifications, but for the life of me can't understand the logic of butchering a $300 dollar putter

well, i guess i can, but i dont think i would ever do it myself

Goals: Correct slice on driver/long clubs(close!), work on consistent iron distance, practice aiming irons

In My Hoofer
983K 10.5*/Aldila NV-S
Great Hawk 3/5w 755 4-P Watson Wedges - 52/7,56/13,60/7Carbite Tri-Weight Malletstill working on replacing fairway clubsscores so far:...


twinke masta Well Established Member

twinke masta

Posted
Posted

You couldve sold that putter and bought a Newport 2 Detour...instead of butchering it and making it lose all of its value

In my TerraFirma X Bag
360 Ti 10.5° Driver
FT-i Squareway 15.0° 3w
04 Big Bertha 19.0° 5w
04 Big Bertha 4-9, PW, GW +1/2" Irons Vokey Spin-Milled 56°10° SW C02 Milled 35" Putter Contour Shoes and SofJoy GlovesA mix of NXT and Laddie Xtreme balls


  • Administrator
iacas Hall of Fame Member

iacas

Posted
  • Administrator
Posted
i'm all for self-modifications, but for the life of me can't understand the logic of butchering a $300 dollar putter

Ditto. I think it's hideous, and if you wanted something that looked like that, he already sells Newport Detours.

Ick.

Erik J. Barzeski — ⛳ I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • Author, Lowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades
1
1
1
1
1
1
1
1

ApocG10 Great Member

ApocG10

Posted
Posted
what a waste of a good putter...

You coulda sold that for decent coin and god something you really wanted...

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter


youngskip40 Dedicated Member

youngskip40

Posted
Posted
Yeah, ouch. I don't like the look of them either, but you just turned a $300 putter into scrap metal. I would've sold it and bought something I did like.
Penta TP Ball || Nakashima Golf HTEC Tour Driver - w/ Mitsubishi Rayon Bassara 83g || Izett Golf 15* Deep Face 3-Wood - w/ Royal Precision Rifle Steel || MD 18* Hybrid - w/ Aerotech SteelFiber 110g || MP-58 3, 4 Irons... MP-60 5, 6 Irons... MP-32 7-PW - w/ Dynamic Gold || MP-T 53-08...

Cut Back.... Member

Cut Back....

Posted
  • Author
Posted
I tried both putters, and the detour had a better feel for me. The newport did'nt have the nice feel the detour had. It felt like i was hitting rock-hard balls every time I putted with it, even when they were soft balls like a titleist. Cutting of half of the back made it have just a straight line, instead of a curved line. So now I can just have a straight putting stroke with it. I don't think I would of gotten much for it anyway. They are selling on ebay for less than I bought it for.

In the bag:

Driver: R9 460
Fairway Woods:FT 3 Wood, Burner 5 Wood
Irons: R7 DrawWedges: 56 sand, Bob Vokey Spin-Milled 60 LobPutter: DetourBall: NXT Extreme


Elvisliveson Great Member

Elvisliveson

Posted
Posted
You couldve sold that putter and bought a Newport 2 Detour...instead of butchering it and making it lose all of its value

What he said.

As an owner of several Scottys, I have to say I am mortified.

My Tools of Ignorance:

Driver: Ping I20 9.5*
Woods/Hybrids: Cobra AMP 3W and 3 HY

Irons: Cobra AMP 4-GW

Wedges: Callaway Forged Copper 56* and 60*

Putters: Scotty Cameron  35" (Several of the flow neck blade variety)

Ball: Bridgestone B330-RX and Srixon Z-Star

Bag: Nike Performance Carry


hkmp5 Established Member

hkmp5

Posted
Posted

Throw it in the trash can, why ruin a good putter? here's a tip for you, cut all the excess metal off the tow of your irons you really don't need it and we all know hitting balls on the tow produces ugly shots.


ham_man Established Member

ham_man

Posted
Posted
I like that you did what you like. Not too sure why everyone here is so damn worried about what he could have sold it for.

ApocG10 Great Member

ApocG10

Posted
Posted
its not a matter of what he could have sold it for, just that its absolutely worthless now. He could have sold or traded it for a putter he liked instead of turning it into a paperweight.

I think the odd look and cut off letters would screw me up more than the curved line ever could.

Im more angry because I was looking for a used one and would have given him decent coin for it if he had just put it up for sale :p

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter


ham_man Established Member

ham_man

Posted
Posted
just that its absolutely worthless now

False. It is absolutely worthless to you. It is absolutely worth something to him.


ApocG10 Great Member

ApocG10

Posted
Posted
no, it is worthless. As in, worth zero dollars. Absolutely no worth. He may like how it feels and plays, but that doesnt change that it is worth nothing, and he still doesnt knoow if he likes how it will perform.

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter


twinke masta Well Established Member

twinke masta

Posted
Posted
well i guess if he likes it, more power to him, if he sinks more putts then great, its priceless. Plus I am sure for 100$ he can send i back to scotty and they can replace the tail. Though I still think he wouldve gone for a diff model instead of the knife.

In my TerraFirma X Bag
360 Ti 10.5° Driver
FT-i Squareway 15.0° 3w
04 Big Bertha 19.0° 5w
04 Big Bertha 4-9, PW, GW +1/2" Irons Vokey Spin-Milled 56°10° SW C02 Milled 35" Putter Contour Shoes and SofJoy GlovesA mix of NXT and Laddie Xtreme balls


BluesMan Member

BluesMan

Posted
Posted

I think modding clubs is a nice idea. Certainly makes you think about equipment a bit more than just accepting what the companies can give you.

Then again, trying to take on Titleists multi-million pound research department with a hacksaw probably isn't a great idea :)

If it works for him, fair play.

Ping Si3 8* Stiff
Titleist 906 F2 15* Steel Stiff
Titleist 906 F2 18* Steel Stiff
Taylormade RAC LT Rifle 6.0
Callaway X Tour 54, 60Yes! Tracy


Note: This thread is 5845 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • iacas
      Mizuno Jpx One Driver & Fairway Woods

      By iacas · Posted

      Nah, man. People have been testing clubs like this for decades at this point. Even 35 years. @M2R, are you AskGolfNut? If you're not, you seem to have fully bought into the cult or something. So many links to so many videos… Here's an issue, too: - A drop of 0.06 is a drop with a 90 MPH 7I having a ball speed of 117 and dropping it to 111.6, which is going to be nearly 15 yards, which is far more than what a "3% distance loss" indicates (and is even more than a 4.6% distance loss). - You're okay using a percentage with small numbers and saying "they're close" and "1.3 to 1.24 is only 4.6%," but then you excuse the massive 53% difference that going from 3% to 4.6% represents. That's a hell of an error! - That guy in the Elite video is swinging his 7I at 70 MPH. C'mon. My 5' tall daughter swings hers faster than that.
    • M2R
      Mizuno Jpx One Driver & Fairway Woods

      By M2R · Posted

      Yea but that is sort of my quandary, I sometimes see posts where people causally say this club is more forgiving, a little more forgiving, less forgiving, ad nauseum. But what the heck are they really quantifying? The proclamation of something as fact is not authoritative, even less so as I don't know what the basis for that statement is. For my entire golfing experience, I thought of forgiveness as how much distance front to back is lost hitting the face in non-optimal locations. Anything right or left is on me and delivery issues. But I also have to clarify that my experience is only with irons, I never got to the point of having any confidence or consistency with anything longer. I feel that is rather the point, as much as possible, to quantify the losses by trying to eliminate all the variables except the one you want to investigate. Or, I feel like we agree. Compared to the variables introduced by a golfer's delivery and the variables introduced by lie conditions, the losses from missing the optimal strike location might be so small as to almost be noise over a larger area than a pea.  In which case it seems that your objection is that the 0-3% area is being depicted as too large. Which I will address below. For statements that is absurd and true 100% sweet spot is tiny for all clubs. You will need to provide some objective data to back that up and also define what true 100% sweet spot is. If you mean the area where there are 0 losses, then yes. While true, I do not feel like a not practical or useful definition for what I would like to know. For strikes on irons away from the optimal location "in measurable and quantifiable results how many yards, or feet, does that translate into?"   In my opinion it ok to be dubious but I feel like we need people attempting this sort of data driven investigation. Even if they are wrong in some things at least they are moving the discussion forward. And he has been changing the maps and the way data is interpreted along the way. So, he admits to some of the ideas he started with as being wrong. It is not like we all have not been in that situation 😄 And in any case to proceed forward I feel will require supporting or refuting data. To which as I stated above, I do not have any experience in drivers so I cannot comment on that. But I would like to comment on irons as far as these heat maps. In a video by Elite Performance Golf Studios - The TRUTH About Forgiveness! Game Improvement vs Blade vs Players Distance SLOW SWING SPEED! and going back to ~12:50 will show the reference data for the Pro 241. I can use that to check AskGolfNut's heat map for the Pro 241: a 16mm heel, 5mm low produced a loss of efficiency from 1.3 down to 1.24 or ~4.6%. Looking at AskGolfNut's heatmap it predicts a loss of 3%. Is that good or bad? I do not know but given the possible variations I am going to say it is ok. That location is very close to where the head map goes to 4%, these are very small numbers, and rounding could be playing some part. But for sure I am going to say it is not absurd. Looking at one data point is absurd, but I am not going to spend time on more because IME people who are interested will do their own research and those not interested cannot be persuaded by any amount of data. However, the overall conclusion that I got from that video was that between the three clubs there is a difference in distance forgiveness, but it is not very much. Without some robot testing or something similar the human element in the testing makes it difficult to say is it 1 yard, or 2, or 3?  
    • coachjimsc
      Wordle Daily Puzzle

      By coachjimsc · Posted

      Wordle 1,668 3/6 🟨🟨🟩⬜⬜ ⬜🟨⬜⬜🟨 🟩🟩🟩🟩🟩
    • boogielicious
      Wordle Daily Puzzle

      By boogielicious · Posted

      Wordle 1,668 3/6 🟨🟩🟨🟨⬜ 🟩🟩🟩🟩⬜ 🟩🟩🟩🟩🟩 Should have got it in two, but I have music on my brain.
    • iacas
      Wordle Daily Puzzle

      By iacas · Posted

      Wordle 1,668 2/6* 🟨🟨🟩⬛⬛ 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept