Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5914 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hi guys,

Last Saturday I purchased two Adams Pro Idea Tour hybrids in the 18 and 20 degree to replace my 2 and three irons. Below are the length compared to each other.

2 iron 39.25" compared to 18 degree hybrid is 40.75"
3 iron 38.75" compared to 20 degree hybrid is 40.25"

Should I cut my hybrids down to where my irons are as I will probably hit the hybrids a bit further and cause a gap in distances.

Thanks again.

titleist.gif Titleist 910 D3 - Project X 6.0 7C3 Shaft  |  adams.gif Adams XTD Super Hybrid - 15 degrees  
adams.gif Adams Idea Pro A12 Hybrid - 18 degrees 
Adams CB2 - KBS Tour Shafts - 4 - PW
vokey.gif Vokey 54.10 Oil Can  |  vokey.gif Vokey 60.07 Oil Can  |  rife.gif Rife Trinidad - SuperStroke


Posted
I just got an Adams A7 hybrid and I might cut it down bbecause it feels longer than it should - longer than it should be on the step up from 3H to 2H. I'm not sure about the philosophies on hybrid shaft length, as it's primarily been a 'hot-button' issue with drivers lately.

Current Gear Setup: Driver: TM R9 460, 9.5, Stiff - 3W: TM R9, 15, stiff - Hybrid: Adams Idea Pro Black, 18, stiff - Irons: Callaway X Forged 09, 3-PW, PX 5.5 - SW: Callaway X Series Jaws, 54.14 - LW: Callaway X Series Jaws, 60.12 - Putter: PING Redwood Anser, 33in.


Posted
Hybrids have shaft lengths longer than irons but shorter than FW woods.

Test the 2H and 3H and see how far you hit them as is. If you have good control, don't cut them. If you end up with distance gap, you might choke down a half-inch on the 3H to take some smoke off the shot.

Also, the Hs are only 2* apart in loft. Usually 3* or more.

Let us know what happens. This is an interesting question.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
I had mine cut down an inch, but all of my clubs are cut down because I'm 5'6". I had them cut down to get a flat lie without choking down on them, but they are still longer than my 3 and 4 irons.

Posted
I have the A30S 3-5 hybrids and cut them down a 1/2". If you look at the specs on Adams clubs they avg progressively 1/4" - 1" longer than other clubs makers.


In my clicgear.gif 2.0 Push Cart and callaway.gifgolf bag are - 

 

 Z-Star driver 10.5  Mashie 3 and 7 metals  Mashie 4 hyrbird  Z-Star 4-PW Irons  cleveland.gifCG Black 48, 52, 56 degree wedges  GoLo putter  upro mx+ gps


Posted
First I would hit them before I would cut anything. The thought that popped into my head was, sense they are only 2* apart maybe it would be wise to cut the 20* more than the 18* this in theory would make more of a distance gap between the two.... just my opinion hope it helps

In my bag:

Driver: 905R Proforce V2 S76 10.5*
3Wood: 906F4 Aldila vs proto S80 15.5*
Hybrids: 585H Project X 6.0 21*Irons: AP2 4-PW Project X 6.0 4-6 bent 2* weak 7-PW bent 1* weakWedge: SW SM53* bent from 56* (custom grind by me) DG S200 Wedge: LW SM58* bent from 60* (custom...


Posted
You may want to be careful if the lie angles can't be adjusted. By cutting down the shafts, you are effectively making the lie angles more flat (normally, a shorter-length club would have a more upright lie angle).

An aside -- many people don't realize this, but if you buy a hybrid or wood with a steel shaft, the stock steel shaft is typically shorter than the stock graphite shaft by about an inch, yet the OEM's don't adjust the lie angles -- so, you end up with the same problem.
Driver: Callaway Diablo Edge 10*
Woods: Mizuno F-60 (15*, 18*); Hybrids: Callaway FT-iZ 21*, Callaway X 24*
Irons: Mizuno MX 25 (5I - GW)
Wedges: Mizuno MP T Chrome (56/10), MP T-10 Black Satin (60/8)
Putter: Odyssey White Hot Tour #9

Posted
Would and inch cut off make much diffrents in stiffness? Polly be OK, but I wouldn't want to cut any more than that.

Driver.... Nickent DX Evolver V2 65 stiff /07 Burner YS6+ stiff .
4 wood..... Nickent 4DX
Hybrids.....Tour Edge Geomax 22* 25* 28*
Irons.....TM R7 6-P + AW,SW,LW
Putter.....Odyssey White Hot XG 2 BallBag.......Callaway ORG 14 A.L.I.C.E. Ball........Bridgestone e6 / Srixon Soft Feel...


Posted
Hybrids have shaft lengths longer than irons but shorter than FW woods.

Great response...waiting to see how you handle it. Good luck.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Note: This thread is 5914 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.