Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5719 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hi guys can anyone tell me the difference in the different inserts of odyssey putters!
I think they have the:

white hot xg
black series
white ice

im thinking of changing to a white ice number 9 putter in the hope it has a firmer face!
can anyone please help?

What's In My :: 9" Lightweight Stand Bag

R9 9.5 Degree Stiff Motore 65g
G10 3-Wood v2 Proforce High Launch Stiff
R7 Draw Rescue 3 + 4 Irons i15 green dot, + 1/2 inch- 5-PW 54+60 SM Tour Chrome Studio Style Newport 2 35 inch NXT Tour BallHome Course: http://www.ruffordpark.co.uk


Posted
I found that none of the odyssey putters have a "firm" face. I switched to a scotty and am never going to look back, but that's my preference. I would suggest rolling some putts with one, since I think it would be hard to judge firmness unless you could hit all three putters at once.

Kyle Paulhus

If you really want to get better, check out Evolvr

:callaway: Rogue ST 10.5* | :callaway: Epic Sub Zero 15* | :tmade: P790 3 Driving Iron |:titleist: 716 AP2 |  :edel: Wedges 50/54/68 | :edel: Deschutes 36"

Career Low Round: 67 (18 holes), 32 (9 holes)

Awards, Achievements, and Accolades

Posted
Most of the white hot and white hot XG putters have the soft urethane face inserts. Odyssey also makes the white steel putters, which have a stainless steel insert and provide more solid feedback. Some like the soft feel, others don't. I am currently playing a Scott Cameron putter, but I picked up the SRT white steel 2 ball putter... tired of missing 5 foot clutch puts. (i know... i know... it's the indian) But honestly, the alignment visual helps me quite a bit.

In the Bag: TaylorMade R11 TP - TaylorMade R7 TP TS - Cleveland Halo - TM TP 2009 3-PW - Vokey SM 52 - Vokey SM 60 - Rife Barbados CS - ProV1x 


On the Computer:  Analyzr Pro 
 


Posted
Try rolling some milled face putters. If you want a firm face you most liely will not find it in an insert putter.

909 D2 9.5* Voodoo
906 F4 15.5* UST V2
3DX DC 19* UST SR2
AP2 3-PW PX 5.5
Vokey SM 52.08 & 58.08 DG S300 Circa '62 no. 7 NXT TourWhite Tacki-Mac Itomic Career Low: 1 over par 71


  • 5 months later...
Posted
You're playing an all-steel Scotty and you want to switch to an Odyssey urethane insert for a firmer feel? Not gonna happen. Steel is harder than plastic, end of story.

Posted
There's no doubt my White Ice Rossie feels firmer off the face than my SC Pro Platinum Newport 2. I haven't tried the Black Series but I found the White Hot Odysseys to be very firm with little feel, the White Hot XG series to be too soft for me and the White Ice to be just about perfect firmness (Cue the Goldilocks jokes). I'm not sure how Odyssey grade them but for me it would be (Softer to Firmer) - White Hot XG, White Ice, White Hot (original). I think the White Ice is good combination of firmness and feel.

Plenty of info here: http://www.odysseygolf.com/Global/en...nnovation.html

What's in my Eagles & Birdies Bag:
taylormade.gif R9 SuperTri Stiff 10.5˚
mizuno.gif MX-700 15˚ 3W Stiff
mizuno.gif MX-700 20˚ & 23˚ Hybrid Stiff
mizuno.gif MP 52 4-PW Nippon 950 Stiffmizuno.gif MP - T 10 52˚/07˚ & 58˚/10˚ping.gif Redwood Anser 34"titleist.gif Pro V1x FJD   


Posted
The new Black series tour design doesn't have a insert but a thin urethane layer between the carbon head and the tungsten flange.I also believe that the first Black series went without an insert while the black series i has one which I have and its not firm at all, really soft.

In my Nexos

Driver R9 10.5*matrix ozik xcon 6
3wood dunlop Reaction 15*
hybrid Rescue 09 19* Aldila Re*ax 65 S Irons 755 3-PW project X flighted 5.5 Wedges MP T-10 52* 07 DG S300 WG 706 56* 12* bounce DG Wedge flex1018...


Posted
I found odyssey's to have a really soft feel off the face.

Try a milled face, like a rife or a YES! putter.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
The white ice series came out with the new grooves in mind. This is what i mean.
The golf world killed 2 birds with one stone with the groove rule. They hoped that with decreased spin from wedges, people would change to a softer ball to compensate for the lost backspin. The white ice series was brought out in reaction to this anticipated ball change - change to softer ball = harder insert needed to keep the feel the same.
What I Play:
Wilson Mini Stand Bag | PING G10, 10.5°, Proforce V2 HL S | PING G5, 15°, 18°, Aldila NV 75 S | PING G5, 19°, Aldila VS Proto By You 80 S
Mizuno MX200 4-PW S | Ping Tour W 50/12 X | Ping Tour W 58/TS X | A selection of putters, all 35.5 inches.

Posted
The XG is the softest of the group.

The black series i, white ice and white hot tour are very similar and are each firmer than the XG.
Driver: Callaway Diablo Edge 10*
Woods: Mizuno F-60 (15*, 18*); Hybrids: Callaway FT-iZ 21*, Callaway X 24*
Irons: Mizuno MX 25 (5I - GW)
Wedges: Mizuno MP T Chrome (56/10), MP T-10 Black Satin (60/8)
Putter: Odyssey White Hot Tour #9

Note: This thread is 5719 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Haiduk - Archdevil        
    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.