Jump to content
Note: This thread is 5296 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Did Dyson really have to do a bunch of research to develop the Air Multiplier?

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

It looks cool.

Kyle Paulhus

If you really want to get better, check out Evolvr

:callaway: Rogue ST 10.5* | :callaway: Epic Sub Zero 15* | :tmade: P790 3 Driving Iron |:titleist: 716 AP2 |  :edel: Wedges 50/54/68 | :edel: Deschutes 36"

Career Low Round: 67 (18 holes), 32 (9 holes)

Awards, Achievements, and Accolades

It looks cool.

I guess you can practice pitching through it...

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Best fans in the world! If you have $300 that you absolutely can't find anything better to do with. Apparently though his hand dryer is much better (faster) than normal ones and much more energy efficient. And a billions times the price.

In my bag:

Driver: Titleist TSi3 | 15º 3-Wood: Ping G410 | 17º 2-Hybrid: Ping G410 | 19º 3-Iron: TaylorMade GAPR Lo |4-PW Irons: Nike VR Pro Combo | 54º SW, 60º LW: Titleist Vokey SM8 | Putter: Odyssey Toulon Las Vegas H7

Awards, Achievements, and Accolades

Best fans in the world! If you have $300 that you absolutely can't find anything better to do with. Apparently though his hand dryer is much better (faster) than normal ones and much more energy efficient. And a billions times the price.

Then I'll take three.

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

Ridiculously noisy.
Looks cool.
Try and get your hands on a quality fan from the 30s or 40s. You may well find it's quieter and more efficient. Might even look cooler, depending on your taste!
The Dyson vacuum cleaner was the worst I ever had. Unloaded it and bought a Miele for half the price.

In the race of life, always back self-interest. At least you know it's trying.

 

 


Ha. I thought this was going to be about fans heckling golfers now more than they did years ago (bethpage black etc.. )

"My greatest fear is that when I die my wife will sell my golf clubs for what I told her I paid for them."
What's in my SQ Tour Carry bag?:
Driver: R7 Quad 9.5*
3, 5 Wood: G5 clones
Irons: : AP1 (4-PW) Wedges: 52*, 56*, 62* Spin Milled Putter: White Hot 2 Ball BladeBalls: Shoes: My...

Awards, Achievements, and Accolades

Ha. I thought this was going to be about fans heckling golfers now more than they did years ago (bethpage black etc.. )

C'mon Joey, this is the other than golf forum....lol

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

The Dyson vacuum cleaner was the worst I ever had. Unloaded it and bought a Miele for half the price.

I've heard the Dyson vacuum really sucks, which normally is a good thing for a vacuum cleaner. However, it still doesn't do such a great job picking up dirt compared to some of its competitors. My brother has one and loves it. I'll stick with the Oreck that I paid a lot less for.

My Implements of Destruction (carried in a Hoofer Lite bag):

DRIVER: Big Bertha Diablo 10 degree draw, Aldila regular flex
FAIRWAY WOODS: G2 14 degree 3 wood & 17 degree 5 wood
IRONS: S59 3-PWWEDGES: M/B 54, 58, & 60 degree PUTTER: I Series Anser 4 (or G5i Anser, Anser 2F, or original...

I've heard the Dyson vacuum really sucks, which normally is a good thing for a vacuum cleaner. However, it still doesn't do such a great job picking up dirt compared to some of its competitors. My brother has one and loves it. I'll stick with the Oreck that I paid a lot less for.

Let's just say when I got divorced I left it will my ex. Attachments were useless.

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

My brother and his wife are heading for Splitsville as well. I wonder if she'll get the Dyson?

My Implements of Destruction (carried in a Hoofer Lite bag):

DRIVER: Big Bertha Diablo 10 degree draw, Aldila regular flex
FAIRWAY WOODS: G2 14 degree 3 wood & 17 degree 5 wood
IRONS: S59 3-PWWEDGES: M/B 54, 58, & 60 degree PUTTER: I Series Anser 4 (or G5i Anser, Anser 2F, or original...

Best fans in the world! If you have $300 that you absolutely can't find anything better to do with. Apparently though his hand dryer is much better (faster) than normal ones and much more energy efficient. And a billions times the price.

A local high profile restaurant here has Dyson hand dryers. They're actually pretty amazing. Dry your hands in about 2.2 seconds. lol Sounds like a jet engine though while it's running.


My brother and his wife are heading for Splitsville as well. I wonder if she'll get the Dyson?

If he is smart he will trade for something else..

"My ball is on top of a rock in the hazard, do I get some sort of relief?"

Awards, Achievements, and Accolades

A local high profile restaurant here has Dyson hand dryers. They're actually pretty amazing. Dry your hands in about 2.2 seconds. lol Sounds like a jet engine though while it's running.

I've used the Dyson hand dryers before. I agree they are amazing and work very quickly. I own a Dyson Ball (DC-25) vacuum and it's by far the best vacuum I've ever used (and I've used my share). It's light, works great, is manuverable as can be. If you are in the maket for a vacuum, just spend the money on a Dyson. They really suck (in the good way).

What's in my bag?
Bigger Sticks....: Driver: ping.gif G15 9* Fairwayping.gif 4-wood  Hybrids: 4,5  taylormade.gif Rescue Dual
Smaller Sticks...: Irons:  ping.gif G15 5-PW Wedges: titleist.gif Vokey Wedges 48, 52, 56 degree
Flatter Stick......:  odyssey.gif 2-ball putter
Not a Stick.........: Ball:  titleist.gif Dt So/Lo or NXT Tour  Bag:  taylormade.gif Catalina clicgear.gif


  • Administrator
I've used the Dyson hand dryers before. I agree they are amazing and work very quickly. I own a Dyson Ball (DC-25) vacuum and it's by far the best vacuum I've ever used (and I've used my share). It's light, works great, is manuverable as can be. If you are in the maket for a vacuum, just spend the money on a Dyson. They really suck (in the good way).

Agreed on the Dyson Ball. We got the larger DC-15 because the 25 wasn't around then. 2005...

http://nslog.com/2005/05/12/bought_a..._dc15_the_ball

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

  • 3 weeks later...
Note: This thread is 5296 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Thanks Bill, Really appreciate the tips! I'm hoping between side saddle putting and working on the Jim Venetos swing I'll drop some shots off my typically mid-90's score.
    • Thinking about seeing if our local course will make divot repair part of the annual youth camp….and I love @dennyjones comment to stick ‘em to the carts.   Sadly a lot of the older guys are not stable enough to bend down and make a good repair - so they just let them be or just do the putter tamp.  We also have one member who shuffles his way on and off the green - soft spike marks everywhere….
    • The lie is not really adjustable.  The PGA states that it must have at least 10 deg angle (not sure on the exact #) all of these putters came with the minimum allowable angle from vertical.  This is why the corners are beveled off.  The sole of the club is not intended to sit flat on the ground. Having said all this, the only way to change the angle is to bend the silver piece that the shaft is glued in to. In use: 1. Hold the putter with your top hand and let it dangle 2. the beveled edge will be the closest part to the ground 3. place bottom hand much like holding a pencil 4.  Club should swing forward and back freely but not hit your foot.  If it does then you need to move you top hand outward. 5. Do not manipulate the club path. straight forward and back 6. I keep my top hand tight on the putter.  My bottom hand twists the putter counter clockwise against my top hand.  This keeps the face from opening up. Good luck.  I have been using mine for close to 10 years.  I average 1.7 putts/hole (yes I have statistics on every hole I play) Bill
    • Day 29 (19 Feb 25) - Winter storm in place (here it's cold icy rain), inside day today - started with mirror work and 8i - working on weight shift sequence using shortened swing (backswing to P3) and coming through to P8.  Focused on sensing the shift to the lead foot as I get toward P3 and then coming through smoothly.  Followed up those series of rehearsals with some easy lag putts working to equalize backswing length with downswing finish to 3' - 5' - 8' distances.  
    • This is a long shot given how old this thread is, but I just picked up a Reeso VTX putter and I'm trying to adjust the lie, but it's not obvious how to do that. Aside from unscrewing the hosel from the putter head everything else looks fused together. Wondering if @PRWELLMAN @Yipper @discap have any info about adjusting the lie. Thanks for the help.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...