Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5575 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Is there a way for the offset of the irons adjusted?

i was thinking of reducing the offset on my TM OS RAC 2

and lowering the offset on my Mizuno MX-25

is this possible or am I just dreaming?

Posted
Is there a way for the offset of the irons adjusted?

Not possible (that I know of). But why do you want to reduce the offset? My guess is because of reading about people disliking offset on internet golf forums. I just shot 74, 76, 76 with my Mizuno MX-200s (offset), but sometimes I play MacGregor MT Pro irons (little to no offset). Doesn't change how I swing.


Posted
Is there a way for the offset of the irons adjusted?

as mentioned above not sure its at all possible

and if it is, proably not worth the $$ - just buy new irons as a 35+ index, offset is your freind to a better ball striker (not taking a stab at you, just a generalization) offset can create a big ol hook..for me anyways but so can a bad swing usually GI irons will have more offset than a players irons also i think its a head thing....less offset in my mind looks better at address
"My swing is homemade - but I have perfect flaws!" - Me

Posted
Is there a way for the offset of the irons adjusted?

For game improvement irons, the MX-25s don't have that much offset. How badly could it be affecting you? No offense, but given your handicap I doubt you could tell a difference of a tenth of an inch, which is basically half of the offset for the longer irons.

"Golf is an entire game built around making something that is naturally easy - putting a ball into a hole - as difficult as possible." - Scott Adams

Mid-priced ball reviews: Top Flight Gamer v2 | Bridgestone e5 ('10) | Titleist NXT Tour ('10) | Taylormade Burner TP LDP | Taylormade TP Black | Taylormade Burner Tour | Srixon Q-Star ('12)


Posted
Is there a way for the offset of the irons adjusted?

The only way to would be to adjust the loft of the clubs, but this will affect both bounch and offset. You probably won't be able to tell the difference.

If you weaken the loft you will increase bounce and reduce offset. Strengthing will do the opposite.

Posted
The only way to would be to adjust the loft of the clubs, but this will affect both bounch and offset. You probably won't be able to tell the difference.

No...... the offset will remain. Yes......... you will change the bounce.

Posted
Some models of clubs have more offset than others. If you want less offset, switch model of irons. For an example, check out the Irons Comparison module of the Callaway website:
http://www.callawaygolf.com/global/e...ubs/irons.html

As enis750 said, offset is the friend of higher hdcp golfers. Don't worry about new irons until you start shooting in 90s.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted
No...... the offset will remain. Yes......... you will change the bounce.

You better tell Paul Casey he is wrong as well.

Do you really think you can rotate the club face away from the hosel and keep the same offset. Look at your club and imagine rotating the face. You should be able to see that the leading edge does not remain in the same position.

Posted
You better tell Paul Casey he is wrong as well.

OK... I understend what you mean in theory. In fact I tend to agree.......but it is a very slight change at best. But I would not recommend bending the the MX-25's or the Rac OS2's to such a degree because by time these clubs are bent enough to minimize the offset, the dynamic balance of the clubhead will be totally changed, not to mention the built in bounce. These clubs are already strong lofted clubs and he might end up with a bag full of 1 irons.....per say.


Posted
Shades.... im gonna run this by a couple of my clubmaking freinds over coffee in the morning and see what they have experimented with. Interesting.

Posted
OK... I understend what you mean in theory. In fact I tend to agree.......but it is a very slight change at best.

Which is why I said in my original post that he probably won't be able to tell the difference.


Posted
thanks for the replies, and the reason why i have asked is that I tend to hit the ball better with a less offset club than the ones with the big offsets which I have a tendency to shank it or hook the ball way to the left and right, on the other hand if I use a club that have a less offset I can hit it consistently and a lot straighter.

As for my handicap I do not have one yet, that's just a number i posted there since I started playing in the course for the first time which was 2 months ago, at the moment I average about a Bogey a Hole, im still learning.. going 4 months now on and off playing every two weeks.

Posted
thanks for the replies, and the reason why i have asked is that I tend to hit the ball better with a less offset club than the ones with the big offsets which I have a tendency to shank it or hook the ball way to the left and right, on the other hand if I use a club that have a less offset I can hit it consistently and a lot straighter.

Obviously-play what you want, but it's in your head. You're not shanking, hooking, or slicing the ball because your club has offset.


Note: This thread is 5575 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.