Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5624 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Does anyone know if Callaway's official shop (shop.callawaygolf.com) ever runs sales on any of their iron sets?

I received a few gift cards to the online store and was looking to purchase a new set of irons.  The gift cards cover $250 of the cost of a set, so I wouldn't have to pay more than a $350-$450 out of pocket (depending on the set), but wanted to check if anyone knew of certain timeframes for sales so that I could pay a little less.  I'm not in dire need of new irons yet, so my old ones will suffice for a while...

I wasn't sure if there were certain times of the year when they run club sales to flush out older models for new ones, or something to that nature.  The gift cards are ONLY for the online store by the way...

Any help is appreciated.


Posted

I am not sure about the sale, but I would see if you can use it on the pre-owned store, because if you are not set (no pun intended) on the newest irons you can get older sets for significantly less.  If you can find the set in a "like new" condition on their site you wouldn't be able to tell the difference.  I believe you can find last years models on there.

This weekend they have a 15% off sale until the 20th so you would be able to get even more off.  JAT.

|Callaway I-MIX FT-9  - Driver | Callaway Diablo Octane - 3 Wood | Callaway Diablo Edge Tour [3H & 4H] - Hybrids | Callaway X-forged 2009 - Irons | Callaway JAWS [52, 56, 60] - Wedges | SC Studio Style Newport 2 / Laguna 1.5 / Kombi-S - Putter |
 


Posted

Great suggestion on Callaway Preowned. I got all my clubs there in "like new" condition and they were brand new in shrink wrap. Awesome place to get great prices on clubs. Service is great too. You can have length/lie adjusted before they ship out if you need it.

-Dan


Posted

I'll third Callaway preowned.  If you can use it there, you will find great deals.  I got my irons in "like new" and all were still wrapped except the 6 iron and even that had no marks on it.


Posted

Ya, I think they have sales for the pre-owned site. Actually, I think I just got an e-mail today that they are having a sale on the pre-owned site. I doubt the new clubs you can order from their normal site are ever on sale.

Zack

10.5* Adams Super Fast 10
17*, 21* Adams Black Super Hybrid
X-24 irons
Jaws 52*,56*,60* Wedges
White Ice #9 Putter

Top Flite Gamer v2


Posted

Callaway Preowned has been running a series of Holiday Sales during December. Callaway changes the deal every two days, so you just have visit the site and see if the Active Deal interests you.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

I've done most of my golf club shopping at Callaway pre-owned and have been nothing but happy.  Their ratings are a little bit inconsistent, but tend to be conservative (i.e., the club is probably better than the rating it is given).  The only counter-example was the 7I in my set, which had a chip in the leading edge of the toe, which they claim not to have.  However, it was really pretty minor, and is 100% cosmetic, so I was content to live with it.  The rest of the set was in better condition than I expected.

In the bag:
FT-iQ 10° driver, FT 21° neutral 3H
T-Zoid Forged 15° 3W, MX-23 4-PW
Harmonized 52° GW, Tom Watson 56° SW, X-Forged Vintage 60° LW
White Hot XG #1 Putter, 33"


Note: This thread is 5624 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Probably since the golfer has to swing the club back and up. The hands have to move back and up. You can feel them go back and up just by turning the shoulders and bending the right arm, because it brings your hands towards your right shoulder.  The difference is if you maintain width or not. Less width means a shorter feeling swing path so the more you need to lift the arms. Being as someone who gets the right arm bend at 110+ degrees, it's 100% a timing issue. I am use to like a 1.5+ second backswing. It probably should be like 1 second at most. Half a second or more will feel like an eternity. I have had swings where I keep my right arm straighter and I am still trying to time the downswing based on the old tempo.  Ideally, for me, it is probably going to be a much quicker and shorter (in duration) backswing, while keeping the right elbow straighter. Which also means more hinging to get swing length without over swinging. 
    • Wordle 1,789 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜🟩🟩 ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩
    • I'm currently recuperating from surgery, so no golf, but have been thinking about this quite a bit. This and the don't overbend the right arm thing. It's hard for me to even pose the position, so I'm not 100% sure, but I feel like it's impossible to have the right humerus along the shirt seam and not overbend your right arm, unless your hands are down near your hips. If the left arm is up at or above the shoulder plane and your right arm is bent less than 90 degrees, then your right humerus has to raise or your hands will get pulled apart. Your left hand can't reach your right hand unless either the right upper arm is up or the right arm is overbent. Is that right? If it is, then focusing on not overbending the right arm would force you to raise the humerus. And actually thinking further on it, if you do overbend your right arm, then you're basically forcing your upper arm down or forcing your left arm to bend. Since (for me at least) bending the left arm too much is not something I think I need to worry about, it means that the bend in the trail arm is really the driving force behind what happens to the right humerus. 
    • I managed to knock off a 3, a 13, and a 15 a couple of weeks ago. The 3 was a 185 yard par 3 with a 6 iron to 12 feet. 13 was a 350 yard par 4, which was a 2 iron and a 9 iron to about a foot. 15 was a 560 yard par 5 with a driver in a bunker, 4 iron into the semi, gap wedge to 8 feet and a putt.
    • Wordle 1,789 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.