Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5431 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I've thought about getting blade iron(s) for practice to help me learn better ball striking. While my MX-19s let me get away with crappy swings on the course, on the range their feedback isn't helpful. I was thinking about finding an old blade, basically the least forgiving club I could find, to help me practice and groove my ball striking. Older is better because it's cheaper. I don't need a set, just one or two clubs to help me practice my swing. Any recommendations on a good club model to look for? Yesterday I came across a beat-up set of Mizuno T-Zoid Trues for $59 for the entire 3-PW set. Would the T-Zoids fill that bill? I got a chance to try the 7i briefly and it wasn't quite as unforgiving as I'd thought it would be. Whatever irons I get, I don't plan to play them outside of the range, so I want something that gives me as much feedback as possible.

"Golf is an entire game built around making something that is naturally easy - putting a ball into a hole - as difficult as possible." - Scott Adams

Mid-priced ball reviews: Top Flight Gamer v2 | Bridgestone e5 ('10) | Titleist NXT Tour ('10) | Taylormade Burner TP LDP | Taylormade TP Black | Taylormade Burner Tour | Srixon Q-Star ('12)


Posted



Originally Posted by B-Con

I've thought about getting blade iron(s) for practice to help me learn better ball striking. While my MX-19s let me get away with crappy swings on the course, on the range their feedback isn't helpful.

I was thinking about finding an old blade, basically the least forgiving club I could find, to help me practice and groove my ball striking. Older is better because it's cheaper. I don't need a set, just one or two clubs to help me practice my swing. Any recommendations on a good club model to look for?

Yesterday I came across a beat-up set of Mizuno T-Zoid Trues for $59 for the entire 3-PW set. Would the T-Zoids fill that bill? I got a chance to try the 7i briefly and it wasn't quite as unforgiving as I'd thought it would be.

Whatever irons I get, I don't plan to play them outside of the range, so I want something that gives me as much feedback as possible.



Are your MX-19's so muted that you really can't feel any feedback? I currently play a set of AP1's and granted they feel more muted than my much beloved but sadly gone 735CM's that I had before but I still know if I hit one off the toe, high on the face, ect. I asked this question to my teaching pro once before and in his opinion he didn't think that practicing with a blade would necessarily yield a more technically sound swing but the steady diet of instruction and drills suited for you would. But as he said that was just his opinion. And I do understand he has a dog in this fight!

But to your point if your looking for a straight up blade iron why don't you check around used golf shops or eBay. There are a ton of single iron blades out there. And if all that fails then I will personally send you a Confidence 2 iron that I defy you to get 5 feet off the ground!


Posted


Go to goodwill or a pawn shop. There are always old blades laying around those places.  You can buy one or two if you want.

Originally Posted by B-Con

I've thought about getting blade iron(s) for practice to help me learn better ball striking. While my MX-19s let me get away with crappy swings on the course, on the range their feedback isn't helpful.

I was thinking about finding an old blade, basically the least forgiving club I could find, to help me practice and groove my ball striking. Older is better because it's cheaper. I don't need a set, just one or two clubs to help me practice my swing. Any recommendations on a good club model to look for?

Yesterday I came across a beat-up set of Mizuno T-Zoid Trues for $59 for the entire 3-PW set. Would the T-Zoids fill that bill? I got a chance to try the 7i briefly and it wasn't quite as unforgiving as I'd thought it would be.

Whatever irons I get, I don't plan to play them outside of the range, so I want something that gives me as much feedback as possible.




Posted
Thanks for the advice, guys. Any specific models that are particularly recommended, or are blades just blades? (Any thoughts on the T-Zoid Trues?) [quote name="1par2win" url="/forum/thread/47689/practice-iron-recommendations#post_616364"]Are your MX-19's so muted that you really can't feel any feedback? I currently play a set of AP1's and granted they feel more muted than my much beloved but sadly gone 735CM's that I had before but I still know if I hit one off the toe, high on the face, ect.[/quote] I can feel some feedback, but it's very muted. I've hit what felt like a dead solid shot and looked down to see a ball mark a half inch from the center of the club. I have to really mess up to get anything more than a faint whisper. It's not like they aren't good to practice with, but I'd like a club that tells me exactly what impact was [i]really[/i] like to help eliminate my guesswork.

"Golf is an entire game built around making something that is naturally easy - putting a ball into a hole - as difficult as possible." - Scott Adams

Mid-priced ball reviews: Top Flight Gamer v2 | Bridgestone e5 ('10) | Titleist NXT Tour ('10) | Taylormade Burner TP LDP | Taylormade TP Black | Taylormade Burner Tour | Srixon Q-Star ('12)


Posted

Another good thought might be buying a demo iron from a dealers demo set. From Mizuno they get these sets of about 40 6 irons in different flexes, lengths, lies, etc. ..... try to find the out of production models for about $20 each...... look for the MP-33 or MP 37 ...... classic muscle blades, when you don't hit them near pure, forget it !!!

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted
Any specific models that are particularly recommended, or are blades just blades? (Any thoughts on the T-Zoid Trues?)

Well, blades aren't just blades, just like cavity backs aren't just cavity backs. Technology has grown over the years, and today's blades are probably more forgiving than the blades of years past. My suggestion would be for you to read Ralph Maltby's works on what makes a club forgiving, and look into various blades within that. The company he designs for (GolfWorks) has a set of irons with the blade look that are effectively game improvement irons, while he has said (consistent with his theories about what makes a club forgiving) that some cavity-back clubs on the market aren't as forgiving, and that some players' irons are very forgiving (such as the Titleist AP2). One thing for sure: assuming you're fitted for your playing irons, or even if you aren't, get the same specs (at least with shaft, length, and lie) in your practice blade. No sense learning a swing that will feel different when you try to hit a club on game day.

-- Michael | My swing! 

"You think you're Jim Furyk. That's why your phone is never charged." - message from my mother

Driver:  Titleist 915D2.  4-wood:  Titleist 917F2.  Titleist TS2 19 degree hybrid.  Tour Edge Exotics C723 21 degree hybrid.  Irons 5-U, Ping G400.  Wedges negotiable (currently 54 degree Cleveland, 58 degree Titleist) Edel putter. 

Awards, Achievements, and Accolades

Posted
There are lots of "play it again sports" in plano/richardson/dallas they often have old ram or other off brand blades. Also check out craigslist. [URL]http://www.playitagainsports.com[/URL]

HiBore XLS Tour 9.5*
Adams Fast10 15* 3W
A2OS 3H-7iron 60* LW
8iron Precept Tour Premium cb
9iron and 45* PW 50* GW 56* SW m565 and 455 VfoilPutter Anser Belly Putter Ball in order of preference TPblack e5 V2  AD333


Note: This thread is 5431 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.