Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

Project X Flighted 5.5 on Adams CB2 too stiff?? Opinions appreciated


Note: This thread is 5215 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hi,

I have a set of Adams CB2 with the PX flighted 5.5's...

I made an irritating mistake which is completely my own fault but i ordered them new (off ebay) thinking that they came with the stock shaft which i assume i was using in Golfsmith and assume that was the KBS tour Regular Flex. I hit them beautifully.

So my clubs arrive and to my surprise have different shafts, i do a bit of reading and opinions seem to be varied on how stiff these particular shafts maybe, people saying anything from regular to extra stiff..

Not being able to return the clubs i get impatient staring at them for a week and decide to go hit them last night.

To my horror i was hitting all over the place and it felt like i was hitting rocks, not the forgiving irons i tried in the shop. I appreciate that some of this is likely due to my ability but nevertheless it was a complete change from the clubs i originally tried. They couldn't have felt more different.

So has anyone any experience of these shafts and any suggestions on what to do?

Each club has probably had 5-10 balls hit with each now.

Thanks in advance.

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted
The regular KBS Tour shaft has the same weight as the Project X Flighted 5.5. Also 5.0 is the most flexible so 5.5 can't be very stiff. Seems like they should be comparable.

:tmade: SLDRs 14* driver, 17* fairway, 19* and 22* hybrids | :odyssey: Versa White #1 putter

:nike: XR Pro 24*, 27*, 31*, 35.5*, 40*, 45*, 50* irons | :vokey: SM4 54*, 58* wedges


Posted

Thanks for the reply,

I think i am going to have to take my 6i down to golfsmith and compare them side by side if they will let me.

Anyone else?

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted

Project X 5.5 is considered a stiff shaft but I don't know how they compare to KBS Tour Regular flex.  In my experiences a stiff shaft wouldn't cause higher dispersion ("hitting all over the place") as you experienced but could make the clubs feel different.  I'd do the side by side that you suggested and see how it goes.

If you really had your heart set on the KBS Tour then you should just send them back as you're likely not going to mentally be happy with the Project X, though I'm using the Project X 6.0 flighted on my 2009 X-forged and really like the shaft compared to the Callaway uniflex I was using on my old clubs.

Joe Paradiso

Awards, Achievements, and Accolades

Posted


Originally Posted by newtogolf

Project X 5.5 is considered a stiff shaft but I don't know how they compare to KBS Tour Regular flex.  In my experiences a stiff shaft wouldn't cause higher dispersion ("hitting all over the place") as you experienced but could make the clubs feel different.  I'd do the side by side that you suggested and see how it goes.

If you really had your heart set on the KBS Tour then you should just send them back as you're likely not going to mentally be happy with the Project X, though I'm using the Project X 6.0 flighted on my 2009 X-forged and really like the shaft compared to the Callaway uniflex I was using on my old clubs.


Agreed i dont think it was the shafts that were sending my shots all over. It was my ball striking, the difference seemed to be how it felt between good and bad shots. They just felt so hard with little forgiveness at all.

As for sending them back. I cant now as i have hit them, so im basically stuck as far as i can tell.

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted

Unless you're hitting your 7 iron like 170 yards, 5.5 is probably plenty stiff.

Driver: Taylormade R11 set to 8*
3 Wood: R9 15* Motore Stiff
Hybrid: 19° 909 H Voodoo
Irons: 4-PW AP2 Project X 5.5
52*, 60* Vokey SM Chrome

Putter: Odyssey XG #7

Ball: Titleist Pro V1x


Posted


Originally Posted by michaeljames92

Unless you're hitting your 7 iron like 170 yards, 5.5 is probably plenty stiff.



Well i definately dont want them any stiffer! I'm going to give them a second chance down at the range but i have a feeling im going to end up selling them on very quickly at a loss.

Thanks for the comments.

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted

The OP concern is the 5.5 could be too stiff since he was hoping to receive KBS Tour shafts in regular flex.

Originally Posted by michaeljames92

Unless you're hitting your 7 iron like 170 yards, 5.5 is probably plenty stiff.



Joe Paradiso

Awards, Achievements, and Accolades

Posted
have them soft step them once ( you will have to buy one matching shaft ) and they will play about 1/3 less stiff, you can actually do it one more time beyond that and they will play 2/3 less stiff and closer to a 5.0 and a higher ball flight. better than buying a whole new set of shafts and it beats playing with shafts that will "mentally destroy you"

:callaway: BB Alpha 815 DBD 10.5* Rogue Silver 60 :callaway: x2hot 3deep 14.5* (TBD) :tmade: RSI UDI 20* RIP Tour 90 :bridgestone: J40CB 4-PW Steelfiber i95 :vokey: SM4 50* KBS Tour V :vokey: SM5 54* KBS 610 :vokey: SM5 58* KBS HI-REV 2.0 MannKrafted Handmade Custom


Posted


Originally Posted by jpalermo

have them soft step them once ( you will have to buy one matching shaft ) and they will play about 1/3 less stiff, you can actually do it one more time beyond that and they will play 2/3 less stiff and closer to a 5.0 and a higher ball flight. better than buying a whole new set of shafts and it beats playing with shafts that will "mentally destroy you"



Interesting idea, i'm quite new to this level of fitting for clubs. The last set i bought was as a junior about 12 years ago. I'll have a look into it.

Thanks very much!

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted

Golfsmith will give you 90% of the original purchase price if you return the clubs within 30 days.  Here's the link: http://www.golfsmith.com/display_page.php?page_num=ps_difference_9090 .  Soft stepping might work, but I sense you want to the KBS shafts so this could be the best option for you and only cost you $60 - $70.  Before you do it, you might want to find out if the Project X are standard shafts and if there is an extra change to switch to KBS  if you order direct from Cobra or another store.

Originally Posted by auroch

Agreed i dont think it was the shafts that were sending my shots all over. It was my ball striking, the difference seemed to be how it felt between good and bad shots. They just felt so hard with little forgiveness at all.

As for sending them back. I cant now as i have hit them, so im basically stuck as far as i can tell.



Joe Paradiso

Awards, Achievements, and Accolades

Posted


Thanks for the reply, unfortunately i tested the clubs at Golfsmith but bought them from ebay for the simple reason that i got them for a heck of alot cheaper. I got 4-PW for $430 and i think golfmsith are offering them for between $700 - $800 but with the KBS Tour which i now know!

I wonder if i could trade them in?

Originally Posted by newtogolf

Golfsmith will give you 90% of the original purchase price if you return the clubs within 30 days.  Here's the link:  http://www.golfsmith.com/display_page.php?page_num=ps_difference_9090.  Soft stepping might work, but I sense you want to the KBS shafts so this could be the best option for you and only cost you $60 - $70.  Before you do it, you might want to find out if the Project X are standard shafts and if there is an extra change to switch to KBS  if you order direct from Cobra or another store.



Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted
You definitely could trade them in at Golfsmith. You could get more using Ebay but that will take time. You may want to get what you want right away.

:tmade: SLDRs 14* driver, 17* fairway, 19* and 22* hybrids | :odyssey: Versa White #1 putter

:nike: XR Pro 24*, 27*, 31*, 35.5*, 40*, 45*, 50* irons | :vokey: SM4 54*, 58* wedges


Posted

Looking at the trade-in Golfsmith would offer you between $250 - $300 for trade-in but you might do better in person if you're willing to buy a set of clubs from them.

Joe Paradiso

Awards, Achievements, and Accolades

Posted

px_chart_0810.png

The flighted shafts play "softer" than the regular shafts so the 5.5s are considered R+.  This, of course, means little because there's no standardization for what constitutes R, S, XS, etc.

:tmade: SLDR 12* :ping: G20 4W :adams: Speedline Super S 4H :mizuno: JPX-825 Pro 4-G :tmade: ATV 56* & 60* :cameron: 2014 Select Newport or 1997 Teryllium 3 Newport


Posted

Thanks for the responses and info everyone, its much appreciated.

I hit the range again last night and gave them a second shot and im glad that i did. The longer irons 4-5 are going to take some getting used too but the rest were playing much better and very straight. It was clearly me the previous night, i had just been for a run and it was over 100 outside. I'm english and not used to existing in such temperatures! Not to mention the weird grass they have over here in the US.. Its like hittin off uneven straw!

On a side note, i also hit my  brand new FT-IZ tour 10.5 voodoo stiff last night and what a beast that is. Bombs straight down the middle 9/10 of the time. Reallly pleased i picked that up for $90 on ebay.

Anyway thanks, im keeping the clubs and im going to work on my game.

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted

After doing a little more research i see that people seem to think the 4 and 5 iron shafts are over long in comparison to the rest of the clubs. Looking at my 4 and 6 side by side the 4 seems to be well over an inch in longer.

What would be a typical difference here?

Adams CB2 wt Project X 5.5 Flighted

Callaway Ft-Iz Tour 10.5 wt Voodoo Stiff

Cleveland Black Pearl CG14 60'

Odyssey White Ice #9 Mallet

 


Posted

Lol. I really need to learn to read. The 5.5's are quite stiffer than the reg KBS shafts but different profile. From memory the KBS launch much higher than the X's

Originally Posted by newtogolf

The OP concern is the 5.5 could be too stiff since he was hoping to receive KBS Tour shafts in regular flex.



Driver: Taylormade R11 set to 8*
3 Wood: R9 15* Motore Stiff
Hybrid: 19° 909 H Voodoo
Irons: 4-PW AP2 Project X 5.5
52*, 60* Vokey SM Chrome

Putter: Odyssey XG #7

Ball: Titleist Pro V1x


Note: This thread is 5215 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.