Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4256 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I bought this driver from eBay for a 'buy it now' price. It's immaculate and I doubt it's ever been used. I can't find one in gold anywhere on eBay or the web, I'm hoping it may even be limited edition. It's a Honma MG460-RF Gold. Which apparently are not well known at all. Any rough guesses on how much it's worth would be much appreciated. I doubt I'll ever play as I'll probably ruin it and it's a beautiful driver! Thanks.


  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Sure is purdy. Maybe contact Honma in Japan..?  I've seen some of their woods and irons on craigslist go for some good $$$.

Sorry I can't help, but good luck in your search.

Awards, Achievements, and Accolades

  • Moderator
Posted

If it's 4 stars then it is definitely worth some money. Here's another gold driver, selling for $2,470

http://www.ebay.com/itm/4-STAR-GOLD-HONMA-GOLF-JAPAN-BERES-MG710-10deg-R-FLEX-ARMRQ-UD49-/400340143967

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

Posted
My one looks almost identical to the one on eBay from the top, but the bottom is totally different. If I google the model I can find similar drivers in the results, but I cannot find a gold one anywhere. I'm sure it's not like a collectors item, but the workmanship and quality is outstanding. Thanks for the info!

Posted
I've just noticed, there are 4 stars on the shaft. I cannot find an identical driver anywhere in the internet whatsoever.

Posted
I've never even heard of the brand. Maybe contact the company and have them verify its authenticity?

Colin P.

Awards, Achievements, and Accolades

Posted

Probably worth a couple of hundred, perhaps several hundred, especially in that condition - but a cynic would say that it is worth what you paid.

That value would be in the Japanese market.

Most Honma Twin Marks do go for decent money.

My guess is that it would be worth $700 to the right buyer. Maybe even close to $1000. It would have to be a collector. The club might not even be conforming.

For those who have only ever heard of mass market OEMs, Honma has a huge reputation, certainly in the Miura class, but a lot of it is glitzy stuff which appeals to the Asian market only.

They sponsor a lot of top Asian players, including Liang Wen Chong, a great player.

Maybe ring the US office and ask about it.

Office:

Premier Golf Distributors, Inc.
809 Spring Forest Rd
Suite 800
Raleigh, NC 27609-9198


Toll Free: 1.888.845.8665 

Phone: 919.850.2202

In the race of life, always back self-interest. At least you know it's trying.

 

 


Posted
Thanks for the info. I have found a few 2* and 3* drivers in black. But I've yet to find one in gold and this one also has 'Hiro Homna' inscribed on the too, whereas none othe the others have this. Thanks for your help.

  • Moderator
Posted

Probably worth a couple of hundred, perhaps several hundred, especially in that condition - but a cynic would say that it is worth what you paid.

That value would be in the Japanese market.

Most Honma Twin Marks do go for decent money.

My guess is that it would be worth $700 to the right buyer. Maybe even close to $1000. It would have to be a collector. The club might not even be conforming.

Correct, good chance it might not be conforming

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Awards, Achievements, and Accolades

Posted
Actually, I'm starting to doubt its real. I find it difficult to believe that such a good fake could be made! But it has no serial number on the hosel. I've contacted Honma, bit I'm 90% sure it's fake now. :-(

Posted

Actually, I'm starting to doubt its real. I find it difficult to believe that such a good fake could be made! But it has no serial number on the hosel.

I've contacted Honma, bit I'm 90% sure it's fake now.

No way in the world is it fake.

In the race of life, always back self-interest. At least you know it's trying.

 

 


Posted
Well that's what I thought... Because it is so well made. There's even a hologram effect on the shaft and I've tested the the face with a magnet to make sure it's titanium and not steel, but in Honmas website they say every single club that leaves their factory has a serial number on the hosel, and it hasn't got one.

Posted

Well that's what I thought... Because it is so well made. There's even a hologram effect on the shaft and I've tested the the face with a magnet to make sure it's titanium and not steel, but in Honmas website they say every single club that leaves their factory has a serial number on the hosel, and it hasn't got one.

It might have even been a one-off paint job or something like that.

Who knows - it may have ben a gift to one of their players for winning a tournament.

The amount of effort that would go into making a fake like that would be worth more than the limited resale value - such a tiny market.

In the race of life, always back self-interest. At least you know it's trying.

 

 


Posted
Actually, I'm starting to doubt its real. I find it difficult to believe that such a good fake could be made! But it has no serial number on the hosel. I've contacted Honma, bit I'm 90% sure it's fake now. :-(

Would it be worth it to fake something like that? Looks like a lot of workmanship for a few dollars in a limted market, unless they are mass producing the fakes, which doesn't make sense to me either because the market would flood pretty quickly. Could they even sell enough of them to make the production worthwhile? Maybe so but it doesn't seem like it. I would think they would be better off to be building fake R1s or something.


Note: This thread is 4256 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 17 - 2026-01-06 Mix of mat and net work, same focus on trail side and hands. Mirror work again later in the day.
    • Hi all. I have sought permission from admin to post this here. First, here's a quick link to my products on TST, which a few of the mods have been road-testing...  Most of you would be aware of the import tariffs imposed on importers to the US circa September last year. Prior to their introduction, I was selling a decent number each week into the 'States. Since the tariffs came in - which added ~AU$60 to the total cost of getting them over there - sales have dropped to virtually nil. I think fear of the tariffs is the biggest part rather than the actual cost increase, despite me declaring everywhere on my site that we pay the tariffs and have successfully got every order into the US without any problems since. What is still unknown to most US consumers is that these tariffs will DOUBLE in February as Australia Post will no longer be allowed to offer "private" rates, they all change to "commercial". I do indeed think that this will make the products uncompetitive to ship there. So what's the backstory?  I'm a small Aussie business, not some corporate juggernaut. I invented these products - not a reseller for someone else. The import tariffs double in February, so add another ~15% to the total cost. If you want StanceMate alone I can do a super deal on a run-out model PREVIEW HERE (note you cannot purchase this yet. I think the shipped price will be about AU$110 inc Shipping (tariffs included). If you want to reduce the cost of the whole Stryper Plus Bundle I can swap the runout StanceMate to reduce the overall price by AU$60. These work EXACTLY as the newer version, just not as premium quality in the way the finish is achievbed in production) IMPORTANT: All import tariffs are PRE-PAID at my end, and clears customs no problem. I've sent a half dozen since October with every one delivered. NB: I'm not here to get into the politics of the decisions on tariffs, so let's not go down that road. It is what it is! So StanceMate to your door in US - tariffs prepaid - about US$70 Bundle to your door in US - tariffs prepaid - US$240 Bundle (with version 1 StanceMate) to your door in US - tariffs prepaid - US$200 Cheers Corbs
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ 🟨🟩⬜⬜⬜ 🟨🟩⬜🟩⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,662 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ ⬜🟩⬜⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.