Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 3487 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted (edited)

With 5"8 and long legs short arms (tyranosaurus type) 37" wrist to floor I thought standard clubs would be OK. Now this forces me to bend my knees too much, I can turn badly, clearing the left hip is really hard and the grip end is forced too close to me. My spine to club angle is about 90 degree. Now I took an old 1" longer club and looking at the spine to club angle it is still not much more than 90°. When I look at Rorys or Tigers setup the spine is to club is somewhere around 110° at least. 

Still no fitter would tell me to take 2" longer clubs according to the tables floating around the net.

Here is me forced into position by a standard  PW:

I will make them 2" longer this week when I get the elongations to glue in and post a new picture.

 

 

8d919a1d-7e60-4ce3-ad6c-4d5e42f2e16a.jpg

Edited by Peter_b

Posted
7 hours ago, Peter_b said:

With 5"8 and long legs short arms (tyranosaurus type) 37" wrist to floor I thought standard clubs would be OK. Now this forces me to bend my knees too much, I can turn badly, clearing the left hip is really hard and the grip end is forced too close to me. My spine to club angle is about 90 degree. Now I took an old 1" longer club and looking at the spine to club angle it is still not much more than 90°. When I look at Rorys or Tigers setup the spine is to club is somewhere around 110° at least. 

Still no fitter would tell me to take 2" longer clubs according to the tables floating around the net.

Here is me forced into position by a standard  PW:

I will make them 2" longer this week when I get the elongations to glue in and post a new picture.

2" club extensions will compromise the structural integrity of the shafts.

  • Upvote 1

:callaway: Big Bertha Alpha 815 DBD  :bridgestone: TD-03 Putter   
:tmade: 300 Tour 3W                 :true_linkswear: Motion Shoes
:titleist: 585H Hybrid                       
:tmade: TP MC irons                 
:ping: Glide 54             
:ping: Glide 58
:cleveland: 588 RTX 62

Awards, Achievements, and Accolades

Posted

OK, I was testing setup with different clubs and my legs straightens more and upper body leans gets steeper at 39" for the 5 Iron so its an inch an 1/4 more. Is that OK with an elongation or do you recommend new shafts? 


Posted

5' 8" and a 37 inch wrist to floor?! 

Wow...just wow!  I'd think a fitter would accommodate that though.

Agree with @SavvySwede though, I think you might be compromising the shaft with a 2 inch extension.

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

Posted
12 minutes ago, SavvySwede said:

2" club extensions will compromise the structural integrity of the shafts.

This involves safety also. Advice from GolfWorks school: never extend a non-putter shaft more than 1 inch.

As far as shafts not the right length, it can hurt physically. Successful 1950s tour pro Cary Middlecoff was 6-foot-2 and played with standard length clubs in the pre-custom era. He retired from tour about age 40 due to back problems, which were attributed in part to his too short clubs.

Middlecoff obit

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

Now I remeasured myself and I am 180cm the calculator says that’s even 5 foot 9, The 37 stays as it is, so yeah call me Rex. OK so new shafts, like the idea more than extensions. 

Now I play S300 shafts in Mizuno MP 69. Before I played Dynamic SL true temper shafts. I like the heavy feel at 38" 5i. Now a 39" or 39.5 inch 5 iron could really be a brick?

What is recommended for long club short arm? 

Fitter I dont know any I would trust. Most want to sell clubs. 


Posted

Peter_b,

Do any of the golf resorts have clubfitters with good reputations? And who will talk to everyday people? Several resorts were springing up in Bavaria circa 2004, the last time I visited. 

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

I'm not a club fitter but what charts say to add 2" to the shaft?

Based on PING's chart it says to keep the shaft's length the same just make the clubs more upright by 3 or 3.75 degrees.

 


Posted

None, no chart says add 1", I just feel it could be a bit more than 1" as the chart says. 2 is exaggerated of course but I was thinking of trying at least with one club. If Ping says upright 3 then I wonder what plane they want me to swing on. The club gets steeper, its harder to set the wrist and do the takeaway as the angle between the club and arms almost vanishes and the th swing will get steeper. I cant see how all this is good. Also bending 3 is a lot couldn’t a club or two snap?

WUTiger there are fitters here and I am in Bavaria. Just no one to trust and bad experience with one of them.


Note: This thread is 3487 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.